• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.457-462
• /
• 2022

This study is about the case applied of a shallow foundation reinforcement method for a low/mid-rise building where a relatively small load is applied by using a soil stabilized material that utilizes recycled resources. First, laboratory mixing test was conducted for four mixing ratios in order to derive the optimal mixing ratio in the field. Using the derived optimal mixing ratio, it was applied as a shallow foundation for the building in the field. The field application method used a simple process of compaction by the soil mixedure with the original soil and the soil stabilized material in the field. After field application, a plate bearing test was performed on one original ground and two improved ground to confirm the allowable bearing capacity. As a result of checking the bearing capacity, it was found that sufficient bearing capacity was exhibited.Therefore, it was confirmed that it can be used as a shallow foundation for the building.

• Journal of Engineering Education Research
• /
• v.16 no.1
• /
• pp.45-53
• /
• 2013

The Korean Society for Engineering Education (KSEE) has been conducted scholarship meeting, workshop, and publicated academic journal, Engineering Education Research, since 1998. Kim Jin-soo analysed 'Engineering Education Research' on methods of research and contents. However, there are an in crease in quantity since then, it needed to analyse and arrange. This study analysed all 417 papers which were published from 1998 to 2012. The conclusion is as in the following. First, the number of collections published has been increasing up to 6 per year. 75.5% of the lead author's institution are universities, and Engineering Education Innovation Center researcher has been increasing steadily up to 8.9%. Research about Engineering Education Methods and Programs are being mostly studied. Apart from classified field in this, a study on the psychological characteristics of technology students are being steadily researched. In papers, the literature/development research method is used the most frequently (54.6%), the research study (39.9%) is the next and the experimental research method (5.5%) is followed by. Since 2006, study using the experimental research method is the growing lately. Second, characteristic of study between institution of lead author, a field of study, a number of study and methods of research by cross analyzing. The result is as in the following. In case of university and Engineering Education Innovation Center researcher studied much more about Engineering Education Methods and programs, research laboratory researcher tend to study about Engineering Educational Philosophy and Policy. Also, foreign researcher tend to introduce Engineering Education Example and Lecture. In case of university and foreign researcher used the literature/development research method frequently. Engineering Education Innovation Center and research laboratory and school researcher used the research study much more. There is no difference between a field of study and research methods. Finally, research strategies and new direction for improving the engineering education journal's papers at the section of discussion and suggestion were suggested.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1803-1808
• /
• 2010

Electric railway system consists of rolling stock, track, signal and catenary system. ATP system in railway signaling system is the important one grasping the position and velocity of a train. The wayside device of ATP system is installed between rails. Recently, the research about increasing train speed has been developed in total departments of the railroad systems. The study on the information transmission between on-board device and wayside device is required for increasing the train speed in the ATP system. When the train speed is increased as to same transmission distance, the problem on information transmission occurs because the transmission time is decreased. In case that the transmission distance is extended, the transmission time is decreased with respect to the train speed. Therefore, we have to define the standard magnetic field intensity as to the train speed in order to transmit correctly telegram. In this paper, the transmission distance for the telegram is suggested on the basis of the train speed. Also, the standard magnetic field intensity from the wayside device to on-board device is proposed by using transmission distance regarding the train speed in the ERTMS/ETCS system by using Matlab program. Also, BER according to the train speed is presented by calculating electric field intensity from the magnetic field intensity.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.2
• /
• pp.24-27
• /
• 2021

This paper presents a design methodology of high-temperature superconducting (HTS) magnets. The magnet consists of several double pancake coils with a variety of wire width. This technique, named Multi-Width, is well known to make efficient use of the superconducting wire. It is common for design of high-temperature superconducting magnets to not only reduce wire consumption used, but also consider the homogeneity of the magnetic field. In this paper, we study a design method that efficiently reduces wire usage while considering magnetic field homogeneity. The design is carried out by calculating the critical current and the critical magnetic field according to the configuration of arranging the thickness of the wire to determine the number of windings. The width of wire comprising the magnet was set to 4 - 12 mm, and the number of double pancake coils was set to an even number to consist of top-down symmetry. To verify the validity of the design, we compared the progress of the design code with a complete enumeration survey. As a case study, we designed a magnet that generates a central magnetic field of 3 T or more in a 240 mm bore in diameter. Optimality can be evaluated by weighing wire consumption and field homogeneity according to the magnet's use or user preference.

• Journal of the Korean Institute of Gas
• /
• v.5 no.1
• /
• pp.60-72
• /
• 2001

This paper presents the user-interactive productivity analysis model based on material balance as well as deliverability equations equipped with EOS model to perform a productivity analysis for Gorae V structure, Donghae-1 gas field. This model is designed to be able to analyse the productivity in the case of reservoir contacting with the aquifer. Also, in order to investigate the effect of condensation on productions, condensation phenomenon is considered as an apparent skin effect in the computation of bottomhole pressure from average reservoir pressure. By utilizing the developed model, we investigate the productivity analysis for B2 layer of Garae V structure with the various production cases in volumetric and non­volumetric reservoirs that contact with aquifer. From the results in the case of 5500 MMSCF/year of production and reservoir-aquifer contacting angle 270$^{\circ}C$ with aquifer size of 10 times greater than reservoir, B2 layer could maintain peak production rate even after 8.5 years of production by considering the bottomhole pressure which is estimated above the operating pressure of 1298 psia. It is also found that condensate will be formed after 1100 days of production and existed throughout the reservoir at 1270 days. Note that the computed reservoir pressure of B2 layer is maintained sufficiently high enough for production due to the water influx into the reservoir, and skin effect caused by condensation is not significant.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.113-126
• /
• 2017

PURPOSES : This study proposes standards for rural access road pavement section and thickness design considering existing access road construction conditions; the study also proposes a complementary policy that can be used for design convenience. METHODS : Various literature review and case studies had been performed in terms of rural access road section and thickness design, both domestically and internationally, and this was followed by domestic rural access road field surveys. KPRP and KENLAYER were used to analyze the commonalities and predict the remaining life. Data on real cost is used to select an appropriate construction method through economic analysis. RESULTS : The economic efficiency of concrete pavement ($15{\times}15$) was the highest in terms of economic efficiency of performance life and traffic volume. In the case of asphalt pavement, it is considered that the most economical method is to implement micro-surfacing method four times as a preventive maintenance method (once every 10 years and 4.5 years for asphalt concrete pavement and MS construction method, respectively). Repairable asphalt pavement is advantageous for areas where heavy vehicles are expected to pass. In the case of other general areas, it is considered economical to place concrete ($15{\times}15$) pavement. However, as analytical results on its performance life are unavailable, it is to be considered for study in the future. CONCLUSIONS : This study proposed interim design guidelines based on various domestic and international design guidelines and case studies. However, in order to develop the final design criteria applicable to the field, it is necessary to (a) estimate the bearing capacity of the lower level of the pavement at various sites, (b) estimate the daily traffic volume, (c) implement advanced low-cost pavement technologies, and (d) propose maintenance standards and techniques for long-term performance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.4
• /
• pp.309-315
• /
• 2004

This study was carried out to evaluate the seed quality of soybeans produced from upland and drained-paddy fields. Soybeans from drained-paddy field showed significantly higher in the 100 seeds weight and greater in the size of seed length than those from upland fields. However, there are no significant differences in seed width and thickness between upland and paddy fields. In case of Hunter's color value, the lightness (L) was significantly higher in the upland soybeans, but the a (redness) and b (yellowness) values were higher in the drained-paddy field soybeans. Seed appearance of drained-paddy field was poor than that of upland field. Soybeans produced from the drained-paddy field showed higher protein content, whereas, lipid and ash contents were higher in the upland field. Soybeans from upland field had lower contents of total amino acids compared to drained-paddy fields. No statistical differences were found in palmitic, linoleic, and linolenic, but stearic, oleic, saturated fatty acids (SFA), and unsaturated fatty acids (USFA) showed significant differences between soybean seeds from upland and drained-paddy fields. Genistein content was higher in the drained-paddy fields, while daidzein and glycitein contents were higher in the upland fields. This result suggested that the soil condition of drained-paddy field is more favorable to synthesis genistein than daidzein and glycitein.

• Journal of Drive and Control
• /
• v.19 no.2
• /
• pp.1-10
• /
• 2022

Field robots operate in various areas, including construction, agriculture, forestry and manufacturing. Typical tasks of field robots used in various areas include excavation, flattening, and demolition. Such tasks are often accomplished in narrow alleys or indoors. In the case of field robots, there is a limit to working in a small space. Thus, to compensate for these shortcomings, many field robots equipped with Tiltrotators have recently been observed. The advantages of Tiltrotator are improved task efficiency and reduced operating time by reducing unnecessary behavior. We need simulation models that can improve the ability of new people to work and simulate tasks in advance. Thus, in this paper, we developed a simscape-based simulation model and modeling of 6DOF systems for field robots equipped with Tiltrotator. Dynamic modeling of field robot 3D models using Simcape multibody and hydraulic systems of field robots using Simcape Hydraulics were modeled. We applied a PID controller to create a control system that operates along the input angle. Simulation results show that errors occur when comparing input and output angles, but overall, they move along input angles.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.2
• /
• pp.82-91
• /
• 1989

This study was carried out to get the basic information of irrigation plans for the red pepper, such as optimum irrigation level and irrigation requirement in Taegu and Kyungpook province. In this study, red peppers were cultivated in 6 PVC pot lysimeters filled with 60cm deep clay loam soil. Four tensiometers were installed in each plot to measure the soil water pressure head. Field measurements were made during the period June 6 to October 31, 1988 at the experimental farm of Kvungpook National University. Six levels of irrigation were used. They were PF 1.8-2.0, PF 2.2-2.4, PF 2.8-3.0, FC-PF.1.7, FC-PF 2.2, and FC-PF 2.7. The results obtained from this study are summarized as follows : 1. In case of irrigation levels of narrow ranges of water contents, the higher the soil water content was, the larger the ET was. Hut in case of the irrigation levels returning to the field capacity, the lager the PF value of irrigation point was, the larger the ET was. Considering ET, yield and weight per fruit, the latter is much better than the former irrigation method. 2. The mean daily ET and mean ET ratio for each 10-day period showed that the maximum value occured in the last of August. The ranges of those were 3.74-14.64 mm/day and 0.87-3.40, respectively. These values showed that small during the early stage of growth, large during the middle stage and getting smaller in the last stage. 3. In case of irrigation levels of narrow ranges of water contents, the increase of irrigation water supplied increased the ET. The relationship between the two showed nearly straight line. Most of irrigated water was consumed as ET and the rest as percolation. But, in case of irrigation levels returning to the field capacity, the higher the PF value of irrigation point was, the larger the ET ratio was. However, their relationship didn't show straight line. 4. The irrigation level of PC - PP 2.7 was found to be the optimum irrigation level with respect to the yield, the weight per fruit, stem length, irrigation requirement and percolation quantity. In this case, mean daily ET and mean ET ratio were 6.79 mm/day (total 10052 mm) and 1.67, respectively. The maximum mean daily ET and mean ET ratio for 10-day period were 14.64 mm/day and 3.40, respectively, in the last of August, and the maximum daily ET was 2126 mm/day on August 24. 5. In case of PC - PP 2.7 which is found the optimum irrigation level, mean irrigation water required, mean ET and mean percolation water quantity were 7.44 mm/day, 6.79 mm/day(91.3% of irrigation water), and 0.38 mm/day (5.5% of it), respectively.

• The Journal of the Society of Stroke on Korean Medicine
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2011

Objectives : The purpose is to discuss the clinical applications of Orungsan(Goreisan: 五苓散) as an alternative management for increased intracranial pressure in the field of neurosurgery in Japan. Methods and Results : Attention has focused on Kampo medicine(traditional Japanese medicine) for some cerebral disease including chronic subdural hematoma(CSDH) and cerebral infarction in Japan. Orungsan and one of its classes, Sirungtang(Saireto: 柴苓湯) are well known their effects on brain edema. After some studies of Orungsan has the anti-edemic effects by the inhibition of aquaporin, this herbal medicine has been used widely in the neurosurgery field in Japan. It is high time to think about where we are and we go ahead for the progress and the integration in medicine. We have reviewed the studies using Orungsan or Sirungtang, that was reported at the 20th annual meeting of 'the Japan society for Kampo medicine and neurological surgery' was held on November 5, 2011 in Tokyo. Fifteen studies related with Orungsan or Sirungtang were reported among all 32 studies at the meeting. Orungsan in ten, and Sirungtang in five among 14 studies contained specific clinical case. In the aspects of disease, thirteen papers were related with SDH, including CSDH(11), SSDH(1), aneurism clipping for SDH prevention(1), and one was acute cerebral infarction and one was multiple metastatic brain tumor. In the report style, case control study was 7(mostly retrospective), and the case report was 8. Conclusions : Orungsan may be plausible to be an alternative method to reduce brain edema after SDH and other brain injury in the field of neurosurgery.