• Korean journal of applied entomology
• /
• v.54 no.4
• /
• pp.375-382
• /
• 2015

The insecticidal activity of the constituents of cinnamon essential oils and structurally related compounds against both the nymphs and adults of the citrus flatid planthopper Metcalfa pruinosa was examined using a direct-contact application. The toxicity of the cinnamon oil constituents and 21 (E)-cinnamaldehyde related compounds regarding the nymphs of M. pruinosa was evaluated using a leaf-dipping bioassay. Based on 24 h $LC_{50}$ values, hydro-cinnamic acid ($1.55mg/cm^2$) is the most toxic compound, followed by geranic acid ($1.59mg/cm^2$). The $LC_{50}$ values of 11 of the compounds including cinnamaldehyde are between $1.60mg/cm^2$ and $4.94mg/cm^2$. Low toxicities and no toxicity were observed with the other 15 ($5.24mg/cm^2$ to $13.47mg/cm^2$) and two compounds, respectively. Also, the toxicities of the cinnamon oil constituents and 21 cinnamaldehyde related compounds regarding the M. pruinosa adults were evaluated using a direct-spray method. The toxicity of eugenol (10.81 mg) is the most toxic compound for the adults of M. pruinosa, followed by geranic acid (30.68 mg). The $LC_{50}$ values of nine of the compounds including cinnamaldehyde are between 59.16 mg and 96.70 mg. Low toxicities and no toxicity were observed with the other 15 (105.44 mg to 255.76 mg) and three compounds, respectively. The spray formulations that comprise cinnamon bark and cinnamon green leaf oils resulted in 82.3% and 82.9% mortalities, respectively, toward the M. pruinosa adults in a ginseng field. Global efforts to reduce the level of highly toxic synthetic insecticides in agricultural environments justify further studies on cinnamon oils to ascertain whether the corresponding active principles can act as insecticides, when they are applied as a direct spray with contact action, for the control of M. pruinosa populations.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.317-325
• /
• 2012

The Varian PORTALVISION (Varian Medical Systems, US) shows significant overresponses as the off-center distance increases compared to the predicted dose. In order to correct the dose discrepancy, the off-axis correction is applied to VARIAN iX linear accelerators. The portal dose for $38{\times}28cm^2$ open field is acquired for 6 MV, 15 MV photon beams and also are predicted by PDIP algorithm under the same condition of the portal dose acquisition. The off-axis correction is applied by modifying the $40{\times}40cm^2$ diagonal beam profile data which is used for the beam profile calibration. The ratios between predicted dose and measured dose is modeled as a function of off-axis distance with the $4^{th}$ polynomial and is applied to the $40{\times}40cm^2$ diagonal beam profile data as the weight to correct measured dose by EPID detector. The discrepancy between measured dose and predicted dose is reduced from $4.17{\pm}2.76$ CU to $0.18{\pm}0.8$ CU for 6 MV photon beam and from $3.23{\pm}2.59$ CU to $0.04{\pm}0.85$ CU for 15 MV photon beam. The passing rate of gamma analysis for the pyramid fluence patten with the 4%, 4 mm criteria is improved from 98.7% to 99.1% for 6 MV photon beam, from 99.8% to 99.9% for 15 MV photon beam. IMRT QA is also performed for randomly selected Head and Neck and Prostate IMRT plans after applying the off-axis correction. The gamma passing rare is improved by 3% on average, for Head and Neck cases: $94.7{\pm}3.2%$ to $98.2{\pm}1.4%$, for Prostate cases: $95.5{\pm}2.6%$, $98.4{\pm}1.8%$. The gamma analysis criteria is 3%, 3 mm with 10% threshold. It is considered that the off-axis correction might be an effective and easily adaptable means for correcting the discrepancy between measured dose and predicted dose for IMRT QA using EPID in clinic.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.4
• /
• pp.41-54
• /
• 2020

This study was conducted to provide basic data for a transparent and fair bidding system by identifying problems and suggesting improvement measures through an analysis of the bidding status for construction projects and service-related landscaping of multi-family housing. To this end, we used the data from the "Multi-Family Housing Management Information System (K-apt)" that provides the history of apartment maintenance, bidding information, and the electronic bidding system to examine the winning bid status and amount, along with the size and trends of the winning bids by year, and the results of the selection of operators by construction type. As a result, it was found that out of the total number of successful bids (36,831), 4.4% (16,631) were in the landscaping business, and the average winning bid value was found to be about 24 million won. According to the data, 73% of the landscaping cases were valued between 3 million won and 30 million won, and 58.6% of the cases were in the field of "pest prevention and maintenance". 36% of the total number of bids were awarded from February to April, with "general competitive bidding" accounting for 59.8% of the bidding methods. As for the method of selecting the winning bidder, 55% adopted the "lowest bid" and "electronic bidding method," and 45% adopted the "qualification screening system" and "direct bidding method." As an improvement to the problems derived from the bidding status data, the following are recommended: First, the exception clause to the current 'electronic bidding method' application regulations must be minimized to activate the electronic bidding method so that a fair bidding system can be operated. Second, landscaping management standards for green area environmental quality of multi-family housing must be prepared. Third, the provisions for preparing design books, such as detailed statements and drawings before the bidding announcement, and calculating the basic amount shall be prepared so that fair bidding can be made by specifying the details of the project concretely and objectively must be made. Fourth, for various bidding conditions in the 'business operator selection guidelines', detailed guidelines for each condition, not the selection, need to be prepared to maintain fairness and consistency. These measures are believed to beuseful in the fair selection of landscaping operators for multi-family housing projects and to prepare objective and reasonable standards for the maintenance of landscaping facilities and a green environment.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.6
• /
• pp.421-428
• /
• 2014

For the analysis of water supply network, demand-driven and pressure-driven analysis methods have been proposed. Of the two methods, demand-driven analysis (DDA) can only be used in a normal operation condition to evaluate hydraulic status of a pipe network. Under abnormal conditions, i.e., unexpected pipe destruction, or abnormal low pressure conditions, pressure-driven analysis (PDA) method should be used to estimate the suppliable flowrate at each node in a network. In order to carry out the pressure-driven analysis, head-outflow relationship (HOR), which estimates flowrate at a certain pressure at each node, should be first determined. Most previous studies empirically suggested that each node possesses its own characteristic head-outflow relationship, which, therefore, requires verification by using actual field data for proper application in PDA modeling. In this study, a model pipe network was constructed, and various operation scenarios of normal and abnormal conditions, which cannot be realized in real pipe networks, were established. Using the model network, data on pressure and flowrate at each node were obtained at each operation condition. Using the data obtained, previously proposed HOR equations were evaluated. In addition, head-outflow relationship at each node was analyzed especially under multiple pipe destruction events. By analyzing the experimental data obtained from the model network, it was found that flowrate reduction corresponding to a certain pressure drop (by pipe destruction at one or multiple points on the network) followed intrinsic head-outflow relationship of each node. By comparing the experimentally obtained head-outflow relationship with various HOR equations proposed by previous studies, the one proposed by Wagner et al. showed the best agreement with the exponential parameter, m of 3.0.

• Journal of radiological science and technology
• /
• v.36 no.1
• /
• pp.49-55
• /
• 2013

Currently, commercially available phantom can reproduce and evaluate only a static situation, the study is incomplete research on phantom and system which is can confirmed functional situation in the kidney by time through dynamic phantom and blood flow velocity, various difference according to the amount of radioactive. Therefore, through this study, it has produced the dynamic kidney phantom to reproduce images through the dynamic flow of the kidney, it desires to evaluate the usefulness of nuclear medicine imaging. The production of the kidney phantom was fabricated based on the normal adult kidney, in order to reproduce the dynamic situation based on the fabricated kidney phantom, in this study, it was applied the volume pump that can adjust the speed of blood flow, so it can be integrated continuously radioactive isotopes in the kidney by using $^{99m}Tc$-pertechnate. Used the radioactive isotope was supplied through the two pump. It was confirmed the changes according to the infusion rate, radioactive isotopes and the different injection speeds on the left and right, analysis of the acquired images was done by drawn five times ROI in order to check the reproducibility of each on the front and rear of the kidney and bladder. Depending on the speed of injection, radioisotope was a lot of integrated and emissions up when adjusting the pressure of the pump as 30 stroke, it was the least integrated and emissions up when adjusting as 40 stroke. The integration of the left & right kidney was not reached in the amount of the highest when adjusting as 10 stroke. In the changes according to the amount of the radioactive isotope, 0.6 mCi(22.2 MBq), 0.8 mCi (29.6 MBq)was showed up similar tendency but, in the result of the different injection 0.8 mCi, it was showed up counts close to double of 0.6 mCi. In the result of the differently injection speed of the left & right kidney, as a result of different conditions that injection speed was 20 stroke through left kidney phantom, the injection speed was 30 stroke through right kidney phantom, it was enough difference in the resulting image can be easily distinguished with the naked eye. Through this study, the results showed that the dynamic kidney phantom system is able to similarly reproduce renogram in the actual clinical practice. Especially, the depicted over time for the flow to be excreted through the kidney into the bladder was adequately reproduce, it is expected to be utilized as basic data to check the quality of the dynamic images. In addition, it is considered to help in the field of functional imaging and quality control.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.123-130
• /
• 2012

This study was conducted to investigate the effects of cattle slurry on productivity of whole crop barley and Italian ryegrass and environmental pollution in paddy land. Cropping systems used in this study were consisted of two designs, such as whole crop barley applied with cattle slurry (WCB) and Italian ryegrass applied with cattle slurry (IRG). The field experiments were conducted on the clay loam at Backsanmyun, Kimje, Chunlabukdo province in Korea for three years (May 2006 to Apr. 2009). This study was arranged in completely randomized design with three replicates. The yields of WCB and IRG were 7,520 kg/ha and 10,320 kg/ha, respectively. The yields of IRG significantly increased as compared with that of WCB (p<0.05). The yield of Italian ryegrass in 1st cutting time was about 2-fold higher than that of 2nd cutting time. The contents of crude protein of IRG were higher than that of WCB. However, the contents of NDF, ADF and TDN were no difference between WCB and IRG treatments. The pH, and contents of T-N, $P_2O_5$ and organic matter (OM) in soil samples collected at the end of the experiment increased as compared with those at the beginning of the experiment (p<0.05). After the end of experiment, the concentrations of CEC (Ca, Na, Mg and K) in soil samples collected at the end of the experiment were remarkably higher than those at the beginning of the experiment (p<0.05). The concentrations of $NH_4$-N, $NO_3$-N, $PO_4$-P, Cl, Ca, K, Mg and Na in leaching water in paddy land cultivated with WCB and IRG were no difference between WCB and IRG treatments.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.111-122
• /
• 2012

Establishment of the LFQC (Liquid Fertilizer Quality Certification) system is very urgent issue for recycling livestock manure as renewable resources in Korea faced with environmental problem of manure application to land due to intensive livestock farming. In this study, we investigated relevant laws and regulations on livestock manure fertilizer, certifications of eco-friendly agricultural products, government policies on livestock manure management to establish reasonable direction of Korean LFQC (Liquid Fertilizer Quality Certification) system. As a result from this study, the liquid fertilizers in 'LFQC' system could be classified as three levels according to the usage patterns in field; 1st. Individual Farm Level (IFL), 2nd. Joint Farm Level (JFL), and 3rd. Commercial Level (CML). And finally, we found some characteristics in 'Main Level-Grading Factors' of liquid fertilizer such as fertilizing value, harmfulness, stability, uniformity, economic effect, storage potential, commercial value, functionality. Those items were considered to be the key factors for the establishment of 'LFQC' system. More research on 'Evaluation Standards' for concrete guideline and on the 'Main Level-Grading Factors' be needed to complete Korean LFQC system.

• Journal of Hospice and Palliative Care
• /
• v.4 no.1
• /
• pp.26-40
• /
• 2001

Purpose : The purpose of this study was to develop task guidelines for hospice team members. The task range of all personnel who work for hospice institutions was identified, and a tool describing roles and tasks of the hospice team members was developed based on review of related literature, both domestic and international. Methods : The content validity of the tool was assured by an expert panel through two phases of discussion. The first phase of the study included a survey conducted from December 1999 to January 2000 for a total of 126 hospice experts and practitioners affiliated with domestic hospice institutions. The second phase of the study included 35 subjects. The data were collected using a survey when the investigators visited each hospice institution. The data were analyzed using descriptive statistics. Results : 1) In the first phase of the study, all items scored over 80 points in CVI were selected as the roles and tasks of hospice coordinator, nurse, pastor, social worker, pharmacist, nutritionist, therapist, volunteer, and nurse aide. However, two items were excluded because they scored below 80 points: an item describing eligibility of a physician, a person who has a license for managing anesthetic agents was scored as 78.6 points, and an item describing the eligibility of the team leader of volunteers, a person educated at the graduate level was scored as 74.7 points. 2) In the second phase of the study, all items scored over 80 points in CVI were selected as the roles and tasks of hospice nurse, pastor, social worker, pharmacist, nutritionist, therapist, volunteer, and nurse aide. Of the roles of the hospice coordinator, however, the item scored as 77.9 points, assess and plan a patients physical, social, emotional, and spiritual status, and, of the roles of the team leaders of volunteers, the item scored as 78.6, attend a team meeting once a week and participate in building an standard nursing plan for patients were included in the tool since they scored over 80 points in the first phase of the study. Conclusion : The developed task guideline should be further modified and revised based on the findings of a preliminary application in the actual field. There is also a need of continuous research for developing more culturally-appropriate task guidelines for hospice team members.

• Journal of Food Hygiene and Safety
• /
• v.32 no.2
• /
• pp.154-162
• /
• 2017

The purpose of this study was to investigate the microbial reduction effect of chlorine dioxide and sodium hypochlorite in Korean chive. Korean chive inoculated with foodborne pathogens at the level of approximately 7~8 log CFU/g was treated with various concentration of chlorine dioxide (3, 4, 10, 25 and 100 ppm and sodium hypochlorite (100, 150 and 200 ppm) for 5, 10, 30 and 60 minutes. The treatment of 150 ppm sodium hypochlorite and 50 ppm chlorine dioxide for 30 min reduced the number of total bacteria in Korean chive up to 2.0 log CFU/g. Reduction of microbial levels was observed for all concentrations of sanitizers but their effectiveness did not correspond to their concentration. Due to the quality degradation, 50 ppm chlorine dioxide was not appropriate for Korean chive. Most effective reduction of microbial levels was observed when Korean chive were treated with 9 times more sanitizer in volume. For field application, the treatment of 150 ppm sodium hypochlorite showed 2.7 and 4.0 log CFU/g reductions for numbers of total bacteria and coliforms, respectively. Therefore, washing with sodium hypochlorite of a ratio of 1:9 (Korean chive : 150 ppm sodium hypochlorite (w/v)) for 30 minutes can reduce the number of foodborne pathogen in Korean chive.