• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.745-746
• /
• 2016

The compensation effects of the control positions for net residual dispersion (NRD) on the distorted WDM cjannels in dispersion-managed optical links with artificially distributed single mode fiber (SMF) lengths and residual dispersion per span (RDPS) are evaluated.

• Korean Journal of Materials Research
• /
• v.13 no.1
• /
• pp.64-68
• /
• 2003

The 1.6 vol% and 2.5 vol% TiNi/6061Al composites were fabricated by permanent mold casting for investigating the effect of heat treatment on tensile strength for composites. The tensile strength without T6 treatment at 293 K was increased with increasing the volume fraction of TiNi fiber and at 363 K the higher the pre-strain, the higher the tensile strength. The tensile strength of the composite with $T_{6}$ treatment at 293 K was found to increase with increasing both the amount of pre-strain and the volume fraction of TiNi fiber and was higher than that without $T_{6}$ treatment. It should be noted that the tensile strength 2.5vol%TiNi/6061Al composites rolled at a 38% reduction ratio was the maximum value of 298 MPa. The tensile strength of composites decreased with increasing the reduction ratio over 38% because of the rupture of TiNi fiber.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.975-977
• /
• 2013

The optimal distribution pattern is induced in the optical link with an artificial distributions of single mode fiber (SMF) lengths and residual dispersion per span (RDPS). It is confirmed that the descending distribution of SMF length and ascending distribution of RDPS are most suitable to compensate for the distorted WDM signals, as the fiber span number is more increased. in the optical link with 10 ps/nm or -10 ps/nm the optimal net residual dispersion (NRD).

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.32-37
• /
• 2011

In dispersion management (DM) and optical phase conjugation applied into optical transmission links with multi fiber spans for minimizing the impact of nonlinearity and group velocity (GVD), implementation possibility of DM using only one fiber span for pre- or postcompensation was assessed as a function of duty cycle of RZ pulse and residual dispersion per span (RDPS). It is confirmed that DM with optimal net residual dispersion (NRD) controlled by only one fiber span could be sufficiently applied into optical transmission links, though optimal NRD is more increased than that in transmission links with the general DM scheme of pre- and postcompensation. Thus, it is expected that optical transmission system is simply designed and implemented by applying the proposed DM scheme into real optical transmission links. Also, it is confirmed that the advantageous duty cycle of RZ is 0.5 and RDPS is setting to be small value for the effective transmitting wide signal wavelength range in optical links with optimal NRD controlled by only one fiber span.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1A
• /
• pp.7-15
• /
• 2008

In this paper, it is investigated that the limitation due to the asymmetry of optical power with respect to optical phase conjugator(OPC) in mid-span spectral inversion(MSSI) for compensating optical signal distortion due to group velocity dispersion(GVD) and nonlinearities generated in fiber by combining with lumped dispersion management(DM) technique into MSSI. Two kinds of lumped DM configuration(configuration A and configuration B) are considered and compared each other in this research. Configuration A consists of two dispersion compensating fiber(DCF) span positioned after transmitter and before receiver, respectively. Configuration B consists of two dispersion compensating fiber(DCF) span positioned before and after OPC placed at middle of total transmission link, respectively. It is confirmed that the transmission performances are more improved by the configuration A combined with MSSI than configuration B. Also, it is confirmed that the best performance of overall channels are obtained by making net residual dispersion(NRD) to have positive value in self phase modulation(SPM)-limited WDM transmission systems, irrelevant to the configuration of DM.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.391-396
• /
• 2001

Exposed concrete execution is utilized insufficiently due to surface honecomb and undesirable appearance by entrapped air when existing placing method is applied. Therefore, surface glossing and impact properties of cement mortar incorporating fiber glass net blast furnace slag, expansive admixture and Polypropylene fiber are investigated in order to develop precast exposed concrete pannel by dry construction method. The kinds of the forms, placing method and admixture contents are varied. According to test results, surface glossing decrease with elapse of age. Considering the form kinds, surface glossing with acryle + astage shows the best performance. Placing horizontally shows positive results in reducing surface defects such as honecomb. Impacting resistance shows the best performance when glass fiber net applied, due to the enhance in toughness and absorption of impact.

• Journal of information and communication convergence engineering
• /
• v.12 no.2
• /
• pp.75-82
• /
• 2014

Dispersion management (DM), optical phase conjugation (OPC), and the combination of DM and OPC are promising techniques to compensate for optical signal distortion due to group velocity dispersion and nonlinear Kerr effects. The system performance improvement in DM links combined with OPC has been reported; however, the fixed residual dispersion per span (RDPS) usually used in these links restricts the flexibility of link configuration. Thus, in this paper, a flexible optical link configuration with artificially distributed single-mode fiber (SMF) lengths and RDPS in the combination of DM and OPC is proposed. Simulation results show that the best artificial distribution pattern is the gradually descending distribution of SMF lengths and the gradually ascending distribution of RDPS, as the number of fiber spans is increased, regardless of the average RDPS, the optimal net residual dispersion, and the dispersion coefficient of the dispersion compensating fiber.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.813-820
• /
• 2003

The shear friction tests using large direct shear test units were performed to evaluate the friction properties of fiber-mixed soil. The used materials and test conditions were flowing. Soils : SM and ML; mixing fibers : three types of polypropylene fibers(net type 38mm and 60mm, and line type 60mm), reinforcement : geogrid; mixing ratio：0.2% and 0.3%; degree of compaction : 85% and 95%. In the test results, the reinforcing effect of fiber mixed soil was confirmed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.2
• /
• pp.147-151
• /
• 1987

This study was conducted to evaluate the effect of the liquid waste from methane fermentation on chemical components, digestible dry matter and net energy of pasture mixtures of orchard grass, tall fescue, Kentucky bluegrass and ladino clover. The total crude proteins and crude ashes increased with the application of liquid waste, but N-free extracts decreased somewhat and it didn't affect the content of crude fat and crude fiber. Amounts of neutral detergent fiber and acid detergent fiber increased with increasing application of liquid waste and the content of cellulose in cell-wall constituents decreased, but hemicellulose increased. The digestible dry matter was produced 405 kg/10a at optimum application of 42 MT/10a liquid waste compared to NPK check plot of 233 kg/10a. The starch value and net energy lactation were 291.3 KStE and 3450 MJ-NEL respectively indicating that the optimum application of liquid waste increased their values.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.1
• /
• pp.20-25
• /
• 1999

The study was conducted to investigate the effect of cholesterol and fiber on liver lipid metabolism in rats. Male Sprague Dawley rats were administrated 1% cholesterol and 0.25% sodium cholate to induce hypercholesterolemia and were fed diet containing three levels(0%, 5% and 10%) of cellulose and pec-tin respectively. The rats were sacrified after 5 weeks of feeding period. Net weight gain and feed ef-ficiency ratio were increased in 10% fiber groups as compared to those of 5% fiber groups. Feed intake did not show significancy by fiber kinds and levels. Liver and kidney weights tended to be decreased in proportion to level of fiber. Heart weight was lowered in 10% fiber groups as compared to that of 5% fi-ber groups. Liver triglyceride concentration was significantly increased in pectin groups. Total-free-cholesterol and cholesteryl ester concentrations in liver were significantly decreased by fiber and were decreased in proportion to level of fiver. Phospholipid concentration was significantly decreased by fiber and were decreased in proportion to level of fiber. Phospholipid concentration was significantly decreased in 5% cellulose group. the results indicate that 10% pectin may have beneficial roles in hypercholester-olemia.