• 한국안전학회지
• /
• 제27권2호
• /
• pp.78-83
• /
• 2012

This is a study to confirm how to improve and substitute the existing re-bar with other material such as a fiber rope, especially super fiber rope having much more strong tensile strength. 6(b) different fiber rope reinforced beam with a section of $20{\times}30cm$ have been made and tasted as variables designed in the study. The larger diameter of fiber rope, the more capacity of the beam, even though fiber reinforced beam are increased with ten(10)percent, each. Lower capacity of fiber-reinforced beam than normal RC beam has been analyzed theoretically and empirically, based on a lot of experiences of the same size beam test. Fiber rope-reinforced concrete beam does not have sufficient capacity than RC beam due to insufficient bonding capacity of fiber rope in concrete. It leads to decrease beam bearing capacity and crack around lower center of the beam. Therefore, bonding reinforcement of fiber rope beam such as pinning a triangles steel pin in each knot of fiber rope contributes to improving bearing capacity of fiber rope reinforcing beam.

• Structural Engineering and Mechanics
• /
• 제56권6호
• /
• pp.1095-1113
• /
• 2015

Jute rope is one of the most popular materials used for composites in various industries and in civil engineering. This experimental study investigated two types of jute rope with different diameters for jute rope composite plates to determine the best combination of jute rope and carbon fiber in terms of ratio and physical and mechanical properties. Eight combinations of carbon fiber and jute rope with different percentages of carbon fiber were analyzed. Tensile tests for the jute rope composite plate and hybrid jute rope composite were conducted, and the mechanical and physical properties of the specimens were compared. Thereafter, the ideal combinations of jute rope with an optimum percentage of carbon fiber were identified and recommended. These particular combinations had tensile strengths that were 2.23 times and 1.76 times higher than other varieties in each type.

• 대한조선학회논문집
• /
• 제54권2호
• /
• pp.151-160
• /
• 2017

Growing demand and rapid development of the synthetic fiber rope in mooring system have taken place since it has been used in deep water platform lately. Unlike a chain mooring, synthetic fiber rope composed of lightweight materials such as Polyester(polyethylene terephthalate), HMPE(high modulus polyethylene) and Aramid(aromatic polyamide). Non-linear stiffness and another failure mode are distinct characteristics of synthetic fiber rope when compared to mooring chain. When these ropes are exposed to environmental load for a long time, the length of rope will be increased permanently. This is called 'the creep phenomenon'. Due to the phenomenon, The initial characteristics of mooring systems would be changed because the length and stiffness of the rope have been changed as time goes on. The changed characteristics of fiber rope cause different mooring tension and vessel offset compared to the initial design condition. Commercial mooring analysis software that widely used in industries is unable to take into account this phenomenon automatically. Even though the American Petroleum Institute (API) or other classification rules present some standard or criteria with respect to length and stiffness of a mooring line, simulation guide considers the mechanical properties that is not mentioned in such rules. In this paper, the effect of creep phenomenon in the fiber rope mooring system under specific environment condition is investigated. Desiged mooring system for a Mobile Offshore Drilling Unit(MODU) with HMPE rope which has the highest creep is analyzed in a time domain in order to investigate the effects creep phenomenon to vessel offset and mooring tension. We have developed a new procedure to an analysis of mooring system reflecting the creep phenomenon and it is validated through a time domain simulation using non-linear mooring analysis software, OrcaFlex. The result shows that the creep phenomenon should be considered in analysis procedure because it affects the length and stiffness of synthetic fiber rope in case of high water temperature and permanent mooring system.

• 대한안전경영과학회지
• /
• 제25권3호
• /
• pp.31-36
• /
• 2023

The use of hanging scaffolding for exterior wall painting and cleaning in building construction and maintenance carries the inherent risk of fall accidents. While periodic rope replacement is crucial for preventing accidents resulting from rope breakage, current regulations lack specificity in determining appropriate disposal period for fiber ropes. This study analyzed the tensile strength of the most commonly used PP fiber ropes with different diameters (16 mm, 20 mm) in the domestic construction industry. Additionally, the effect of outdoor exposure was examined by measuring the tensile strength of new ropes and ropes exposing to outdoor conditions for 30 days and 90 days. The results showed that the new ropes and those exposed to outdoor for 30 days met the KS (Korean Standards) criteria for tensile strength. However, a significant decrease in tensile strength was observed in ropes exposed to outdoor for 90 days compared to both the new ropes and those exposed for 30 days. Furthermore, the ropes exposed for 90 days did not meet the KS criteria. These findings indicate the degradation of PP fiber ropes due to UV (Ultra Violet) radiation, highlighting the importance of considering this factor when determining the replacement period for fiber ropes used in scaffolding work.

• 한국결정성장학회지
• /
• 제30권6호
• /
• pp.258-263
• /
• 2020

고분자로부터 제조되는 탄화규소 섬유는 고온 내산화성, 인장강도, 그리고 경량성 때문에 세라믹 복합체의 강화재료로 주로 적용되고 있다. 본 연구에서 탄화규소 연속섬유는 유연한 로프 형태의 고온 발열체(> 650℃)로 제조하기 위해 사용되었다. 특히, 탄화규소 섬유 발열체는 고효율의 저항 발열을 위해 단면적과 길이에 대한 저항 변화를 2-point probe 방법으로 측정하고, 비정질 탄화규소 섬유에 존재하는 산소 불순물과 결정립의 크기 제어를 통해 로프형 섬유 발열체의 저항 값을 최적화하였다. 그 결과, 약 100~200 Ω의 저항 범위를 가지는 탄화규소 섬유 발열체는 탄소 섬유 발열체보다 1.5배의 우수한 소비전력 효율을 가졌다.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.64-71
• /
• 2012

60 MPa급, 100 MPa급 고강도 철근콘크리트 기둥에 대하여 횡구속력 보강공법(와이어로프)과 내화보강공법(Fiber-Cocktail) 적용 유무 및 하중비에 따른 내화성능을 평가하기 위하여 표준화재 재하조건에 내화실험을 실시하였다. 실험결과 60 MPa급 고강도 콘크리트 기둥의 경우 와이어로프를 적용함으로써 화재시 축방향의 연성이 향상되며, 내화성능은 23 % 이상 향상되는 것으로 나타났다. 또한 와이어로프를 적용할 경우 하중은 설계하중의 70 % 수준이 적정하다고 판단된다. 100MPa급 고강도 콘크리트 기둥에 와이어로프와 Fiber-Cocktail을 적용할 경우 띠철근만을 적용한 경우보다 내화성능이 4배 이상 향상되는 것으로 나타났으며, 100MPa급 고강도 콘크리트 기둥에 내화성능을 확보하기 위해서는 하중은 설계하중의 70 % 미만으로 설정하는 것이 적정하다고 판단된다.

• Composites Research
• /
• 제28권6호
• /
• pp.378-382
• /
• 2015

인구밀도가 증가하고 매년 고층건물의 수가 늘어나고, 대부분의 사람들이 하루에 엘리베이터를 이용하는 시간이 많아짐에 따라 일상생활 속에서 엘리베이터는 중요한 역할을 하고 있다. 매년 고층건물이 늘어남에 따라 고속 고층 승강기의 기술 요구 수준도 높아져 가고 있다. Carbon-fiber-reinforced plastics (CFRPs)는 높은 강성과 경량화 및 낮은 마찰력 등을 장점으로 하고 있으며, 엘리베이터용 wire rope에 매우 적합한 재료이다. 본 논문에서는 CFRP의 특성을 분석하기 위하여, wire rope와 CFRP UD의 인장 강도 및 수치 해석을 통한 벤딩 해석 비교를 진행하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.529-530
• /
• 2007

• Journal of the Korean Wood Science and Technology
• /
• 제51권6호
• /
• pp.526-541
• /
• 2023

Wooden structures are widely used, particularly in earthquake zones, owing to their light weight, ease of application, and resistance to the external environment. In this study, we aimed to improve the mechanical properties of laminated timber beams using novel hybrid systems [carbon-fiber-reinforced polymer (CFRP) and wire rope]. Within the scope of this study, it is expected that using wood, which is an environmentally friendly and sustainable building element, will be more economical and safe than the reinforced concrete and steel elements currently used to pass through wide openings. The structural behavior of the hybrid-reinforced laminated timber beams was determined under the loading system. The experimental findings showed that the highest increase in the values of laminated beams reinforced with steel ropes was obtained with the 2N reinforcement, with a maximum load of 38 kN and a displacement of 137 mm. Thus, a load increase of 168% and displacement increase of 275% compared with the reference sample were obtained. Compared with the reference sample, a load increase of 92% and a displacement increase of 14% were obtained. Carbon fabrics placed between the layers with fiber-reinforced polymer (FRP) prevented crack development and provided significant interlayer connections. Consequently, the fabrics placed between the laminated wooden beams with the innovative reinforcement system will not disrupt the aesthetics or reduce the effect of earthquake forces, and significant reductions can be achieved in these sections.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.78-84
• /
• 2012

본 연구는 100 MPa급 고강도 콘크리트 기둥에 대하여 횡구속력 보강 및 내화보강 공법 적용 유무에 따른 내화성능을 평가하기 위하여 표준화재 재하조건에서 내화실험을 실시하였다. 실험결과, 띠철근을 적용한 실험체의 경우 43분의 내화성능을 만족하여 내화구조로써 적용할 수 없는 것으로 나타났으며, 동일체적비로 띠철근을 대체한 와이어로프를 적용할 경우 별도의 내화처리 없이 69분의 내화성능을 만족하여 4층 이하 건물에 적용할 수 있는 것으로 나타났다. 또한 띠철근을 대체한 와이어로프 및 폭렬방지를 위한 Fiber-Cocktail 혼입공법을 혼합 적용 할 경우 180분의 내화성능을 만족하여 12층 초과 건물에 적용할 수 있는 것으로 나타났다.