• 한국농공학회논문집
• /
• 제46권1호
• /
• pp.35-40
• /
• 2004

This study is performed to examine the physical and mechanical properties of eco-concrete using soil, natural coarse aggregate, excellent soil compound and polypropylene fiber. The test result shows that mass loss ratio is decreased with increasing the content of coarse aggregate and excellent soil compound. The compressive and flexural strengths are increased with increasing the content of coarse aggregate, excellent soil compound and polypropylene fiber. The coefficient of permeability is decreased with increasing the content of coarse aggregate and excellent soil compound, but it is increased in 0.2% polypropylene fiber content. The lowest coefficient of permeability is showed in $5.066\times 10^{-9}$cm/s. These eco-concrete can be used for farm road.

• 한국건설순환자원학회논문집
• /
• 제2권4호
• /
• pp.345-353
• /
• 2014

This study was evaluated influence of fluidity properties according to basalt fiber and high volume fly ash in the mortar level, as part of a basic study for development of fiber reinforced concrete using basalt fiber and high volume fly ash. In the first step, it was evaluated that fluidity properties of mortar according to replacement ratio 6 level of fly ash(10, 20, 30, 40, 50 and 60mass%) and fluidity properties of mortar according to content 5 levels of SP(1.3, 1.5, 1.7, 1.9 and 2.1%) and content 5 levels of VA(0.2, 0.4, 0.6, 0.8 and 1.0%) for dispersion of the basalt fiber, in the second step, it was evaluated that fluidity properties of mortar using High-volume fly ash (50mass%) on 3 levels of basalt fiber length (6, 20 and 30mm). Results of assessment, if after a fiber mixed, it showed that viscosity agent is more effective to improve the fluidity and fiber dispersion than superplasticizer, high volume fly ash (50%) applying the mixing, due to three properties of fly ash, showed that the improved fiber dispersibility and flow improvement.

• 공업화학
• /
• 제8권3호
• /
• pp.416-424
• /
• 1997

본 연구에서는 고밀집 섬유체에 의한 정적 액-액 접촉기에 대한 이론적 모델링을 통하여 섬유체 접촉기 내부에서의 물질 이동과정과 각 상에서의 축 방향 농도분포 해석이 수행되었고, 여러 운전 조건하에서 출구 농도를 예측하여 실험치와 비교하였다. 본 섬유체 액-액 추출기는 그 구조적 특성 때문에 축 방향 분산이 없는 플러그 흐름 모델로 완벽하게 묘사될 수 있었으며 data fitting을 통해 결정되어 모델식에 적용된 물질전달 계수와 섬유체 추출기 축 방향 반위 길이 당 물질전달 면적의 곱의 항인 $k_a{\sigma}$은 그 섬유체 추출기의 고유 특성 값으로 사용될 수 있었고, 그 값은 약 0.0327cm2/sec이었다.

• 공업화학
• /
• 제7권5호
• /
• pp.977-984
• /
• 1996

실관막 모듈을 이용한 액-액추출은 반응기 단위부피당 표면적이 크므로 신속히 진행된다. 이러한 실관막내에서 추출제와 원료액은 빠른 속도로 접촉하며 두 흐름이 완전히 독립적이므로 부하나 편류현상이 일어나지 않는다. 본 연구에서는 실관막을 이용하여 수용액으로부터 중금속들을 추출하기 위한 추출제들의 선택성을 고찰하였다. 또한, 실관막 내에서 용질의 물질전달에 미치는 분배비의 영향을 확인하기 위하여, 분배비와 총괄물질전달계수를 비교하였다. 이로부터, 분배비가 높은 계는 낮은 계에 비해 실관막 모듈 내에서 물질전달에 미치는 분배비의 영향이 미약함을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.15-21
• /
• 1996

This study was carried out to investigate the making method and properties of Hanji(Korean traditional paper) for wallpaper for the purpose of mass production and mass consumption of Hanji. Paper mulberry fiber was longer than wood fiber in length and it had also much extractives and ash in content. Bast fiber was a little damaged in the fibrilation and beating process because it was weak in flexibility and compressive properties. Proper conditions for making two-ply and three-ply Hanji were examined and six kinds of Hanji were made on the basis of the three-ply paper making method. The sample OH(Original Hanji) 2-2 and OH 3-2 among them obtained good results in quality test by appearance from wallpaper makers.

• Smart Structures and Systems
• /
• 제5권4호
• /
• pp.345-355
• /
• 2009

This article describes the development of a fiber optic accelerometer based on Fiber Bragg Gratings (FBG). The accelerometer utilizes the stiffness of the optical fiber and a lumped mass in the design. Acceleration is measured by the FBG in response to the vibration of the fiber optic mass system. The wavelength shift of FBG is proportional to the change in acceleration, and the gauge factor pertains to the shift in wavelength as a function of acceleration. Low frequency version of the accelerometer was developed for applications in monitoring bridges. The accelerometer was first evaluated in laboratory settings and then employed in a demonstration project for condition assessment of a bridge. Laboratory experiments involved evaluation of the sensitivity and resolution of measurements under a series of low frequency low amplitude conditions. The main feature of this accelerometer is single channel multiplexing capability rendering the system highly practical for application in condition assessment of bridges. This feature of the accelerometer was evaluated by using the system during ambient vibration tests of a bridge. The Frequency Domain Decomposition method was employed to identify the mode shapes and natural frequencies of the bridge. Results were compared with the data acquired from the conventional accelerometers.

• 한국농공학회지
• /
• 제34권3호
• /
• pp.53-63
• /
• 1992

To investgate the fracture behavior of the steel fiber reinforced concreate, the specimens with different steel fiber contents of 0.0%, 0.5%, 1.0%, 1.5%, were made and notched with differents notch depth ratios of 0.0,0.2, 0.4, 0.6, and the three point bend tests were followed. Test results of 16 different types of above combined specimens were summarized as follows. 1.The load line deflection contents were found to increase 5%, 16%, 19%, respectively, compared to the unnotched specimen with the increased of initial notch depth ratio to 0.2,0.4, 0.6, respectively. 2.The frexural strength were found to decrease 14%, 16%, 21 %, respectively, compared to the unnotched specimen with the increase of initial notch depth ratio to 0.2, 0.4, 0.6,respectively. 3.The stress intensity factors of the steel fiber reinforced concrete were found to increase 1.1 1.5 1.9 times, respectively, compared to the concrete with no steel fiber content with the increase of fiber content to 0.5%, 1.0%, 1.5%, respectively. 4.The influence of the mass of the steel fiber reinforced concrete to the whole fracture energy was found to be minor with 6~8 % contribution. 5.The fracture energy of the steel fiber reinforced concrete, considering the load-deflection curve and concrete mass was found to be approximately 350-380kg m/m$^2$. 6.The regression analysis through the relationship between the compressive(Oc)/tensile (OT) strength and fracture energy(Gf) showed that the fracture energy of the steel fiber reinforced concrete could be predicted as follows. Gf= 19.2662 Oc - 3940.4 Gf= 246.876 OT- 6008.8

• 대한간호학회지
• /
• 제27권1호
• /
• pp.96-108
• /
• 1997

The purpose of this study was to determine the effect of endurance training prior to occurrence of muscle atrophy on the mass, myofibrillar protein content and fiber crossectional area of atrophied hindlimb muscles of rats. Adult female Wistar rats were trained prior to occurrence of muscle atrophy induced by hindlimb suspension. Training began on the 1st day for 10min /day at 15m /min on a 0% grade, training exercise increased daily in time and intensity so that by the 4th week rats were running 60min /day, at 34m /min on a i3.5% grade. Wet weight and relative weight of soleus, plantaris and gastrocnemius muscle decreased significantly after seven days of hindlimb suspension. Wet weight and relative weight of soleus tended to increase and that of plantaris and gastrocnemius tended to decrease in the exercise group as compared to the control group. Myofibrillar protein content of soleus and gastrocnemius tended to increase and that of plantaris tended to decrease in the endurance trained group as compared to the control group. Fiber crossectional area of Type I, II fiber in soleus and plantaris muscle tended to increase in the exercise group as compared to the control group. Wet weight and relative weight of soleus. plantaris and gastrocnemius decreased significantly, myofibrillar protein content of soleus, plantaris and gastrocnemius increased in hindlimb suspended rats following endurance training as compared to the control group. There was no change in fiber type percentage and crossectional area of type I and II fiber in soleus muscle and that of type I and IIfiber in plantaris muscle decreased in the hindlimb suspended rats following endurance training as compared to the control group. Wet weight and relative weight of soleus and plantaris tended to increase, that of gastrocnemius increased significantly, myofibrillar protein content of soleus and plantaris muscle increased significantly and that of gastrocnemius tended to increase in the hindlimb suspended rats following endurance training as compared to sedentary rats following endurance training. Crossectional area of type I fiber of soleus muscle tended to increase. that of type I fiber of plantaris muscle increased significantly and that of type II fiber tended to increase in hindlimb suspended rats following endurance training as compared to sedentary rats following endurance training. The results suggest that endurance training prior to occurrence of muscle atrophy can attenuate the decrease of mass, myofibrillar protein content and fiber crossectional area induced by hindlimb suspension.

• 펄프종이기술
• /
• 제33권1호
• /
• pp.38-44
• /
• 2001

The effects of refining load on the paper properties were investigated. HwBKP, SwBKP and SwUKP were refined with PFI mill at the load of 3.33 N/mm and 6.00 N/mm. Higher Scott bond was obtained at the higher refining load for three pulp used in this study. However any changes in the light scattering coefficient with the change of refining load were not observed. Although the effect of refining load on the formation index for SwUKP was not observed, higher refining load gave the better formation for HwBKP and SwBKP. The fiber mass and fiber crowding factor were not affected by the refining load. Higher apparent density and tensile index were obtained with the higher refining load. However, the higher refining load did not improve the tensile index at the same apparent density. The tear index was decreased with the increase of refining load.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.93-99
• /
• 2011

This paper presents a new type of optical silicon accelerometer using deep reactive ion etching (DRIE) and micro-stereolithography technology. Optical silicon accelerometer is based on a mass suspended by four vertical beams. A vertical shutter at the end of the mass can only moves along the sensing axis in the optical path between two single-mode optical fibers. The shutter modulates intensity of light from a laser diode reaching a photo detector. With the DRIE technique for (100) silicon, it is possible to etch a vertical shutter and beam. This ensures low sensitivity to accelerations that are not along the sensing axis. The microstructure for sensor packaging and optical fiber fixing was fabricated using micro stereolithography technology. Designed sensors are two types and each resonant frequency is about 15 kHz and 5 kHz.