• Computers and Concrete
• /
• v.15 no.2
• /
• pp.279-304
• /
• 2015

In this study, reliability analyses of steel fiber reinforced concrete (SFRC) corbels based on stochastic finite element were performed for the first time in literature. Prior to stochastic finite element analysis, an experimental database of 84 sfrc corbels was gathered from literature. These sfrc corbels were modeled by a special finite element program. Results of experimental studies and finite element analysis were compared and found to be very close to each other. Furthermore experimental crack patterns of corbel were compared with finite element crack patterns and were observed to be quite similar. After verification of the finite element models, stochastic finite element analyses were implemented by a specialized finite element module. As a result of stochastic finite element analysis, appropriate probability distribution functions (PDF's) were proposed. Finally, coefficient of variation, bias and strength reduction (resistance) factors were proposed for sfrc corbels as a consequence of stochastic based reliability analysis.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.648-651
• /
• 2011

본 논문에서는 3차원 섬유분포를 가정하여 고유동 섬유보강 시멘트 모르타르의 유동에 따른 섬유방향성변화를 해석적으로 파악해 보았다. 유동흐름은 평면상의 2차원 완전발달 전단흐름을 고려하였다. 유동에 따른 섬유의 회전운동은 섬유간의 상호 간섭효과를 무시한 Jeffery의 기본식에 근거하였다. 굳지 않은 섬유혼입 모르타르의 유동에 따른 섬유방향성 분포 변화를 흐름선과 동일 유동거리 상의 단면에 대해 파악하였다. 그 결과, 단면 내 위치에 따라서 섬유방향성 분포 변화가 크게 차이가 발생하는 것을 확인할 수 있었다. 또한 유동거리에 따른 단면상의 섬유방향성 분포는 초기 유동거리에서 분포 형상에 큰 변화가 발생하였고, 유동에 따라 섬유가 유동방향과 나란하게 놓이는 경향이 커지는 것을 확인할 수 있었다. 이러한 섬유방향성 변화의 예측은 섬유보강 시멘트 복합체의 인장특성에 예측하는데 유용하게 사용될 것이다.

• Journal of the Optical Society of Korea
• /
• v.13 no.4
• /
• pp.439-444
• /
• 2009

Accurate evaluation of polarization characteristics in the integrated optic chip (IOC) for interferometric fiber optic gyroscope was performed. Spatial distribution of optical wavetrains caused by the polarization parameters such as local polarization cross-coupling and polarization rejection coefficient of the IOC were measured utilizing the path-matched optical coherence domain polarimetry (PM-OCDP). With the analytic model deduced from Jones matrix representation, we could accurately identify the polarization characteristics of the IOC. Both degree of measurement error due to the imperfect equipment conditions in PM-OCDP and birefringence of IOC chip were also characterized.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.485-494
• /
• 2014

A novel antenna with ellipsoid-paraboloid surfaces configuration is designed for matching the incident radial radiation fiber laser distribution for maximum transmission efficiency. The on-axial and off-axial defocus effects on the optical antenna system, resulting in energy loss, are analyzed in detail. Knowledge of the effects of those defocuses on beam divergence, aberration and antenna transmission efficiency is of great importance to the long range communication systems.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.187-189
• /
• 2008

The spatial coherence function of multy-mode beam was measured by using a Sagnac interferometer and self referencing technique. For leaner polarization laser beam passing through a multy-mode fiber, its change value of spatial mode and polarization from stress of faber and input coupling angle. And each spatial mode have each polarizations, when we simulation Wigner distribution function and Spatial Correlation function of spatial multi-mode beam by using Hermit Gaussian modes leaner sum. We measured spatial coherence function of using by multy-mode fiber. One can use this measurement method to study and characterize the property of multy-mode light field coming out of GRIN multy-mode fiber.

• Journal of the Optical Society of Korea
• /
• v.6 no.3
• /
• pp.108-116
• /
• 2002

Lasing modes of laser-diode-pumped fiber grating lasers are analyzed by coupled-mode theory. First, a power series solution of the coupled-mode equations is derived under the assumption of an exponentially-decreasing longitudinal modal gain profile for a laser-diode-pumped grating section, followed by determination of the transfer matrix for such a section. Based on these results, an eigenvalue equation for oscillation is then derived and solved numerically for the lasing modes of uniform and phase-shifted fiber grating lasers. Comparisons made with the uniform-gain results indicate that, surprisingly, the lasing mode characteristics are not as significantly altered as might be expected in most cases, even for a highly nonuniform gain profile. In the case of a phase-shifted grating, the phase-shift position appears to have a much greater impact on determining the threshold gain, the modal field distribution, and the front-to-back output power ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.8
• /
• pp.816-822
• /
• 1992

In this paper, propagation characteristics of trapezoidal-shaped segmented core single mode fibers is investigated theoretically as a function of relative Index difference ratio( =p) under the condition of zero dispersion at i=1.,isrm, and bending loss of trape zoidalshaped segmented core single mode fiber is greatly decreased less than that of conventional single mode fibers ( triangular Index, dual shape core). And mode field distribution In core Is confined 2H% stronger than that of a tapezoidal Index fiber In addition, the advantages of trapezoldal-shaped segmented core fibers are compared with t hose of conventional triangular -shaped segmented core fibers.

• Structural Engineering and Mechanics
• /
• v.86 no.3
• /
• pp.325-336
• /
• 2023

A significant component of many civil constructions such as buildings, reservoirs, bridges, and sports halls, concrete has become increasingly popular due to its versatile properties. Concrete's internal characteristics change due to the use of different types of fibers, including changes in its microstructure, volume, and hole dimensions. Additionally, the type, dimensions, and distribution of fibers in concrete can affect the results of flexural strength tests by affecting its compressive and tensile strength. Due to a lack of information, fiber concrete is a new composite material in the production industry that requires laboratory studies to determine its behavior. This study investigated the bending behavior of multilayer slabs made of concrete reinforced by polyamide-propylene fibers against impact in weight lifting exercises. Results showed that adding fibers to concrete slab samples improved the mechanical properties while replacing them hurt the mechanical properties and failure of polymer fiber-reinforced concrete. On the other hand, adding and replacing fibers increases durability and has a positive effect.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.617-619
• /
• 2022

An embedded fiber-optic sensor was manufactured using 3D printing technology for distributed structural monitoring. Strain distribution of the embedded sensor was measured by the optical frequency domain reflectometry, and real-time data visualization for the embedded sensor model was demonstrated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.297-301
• /
• 2001

In this paper, the temperature distribution and thermal stress analysis of 50kVA pole cast resin transformer for power distribution are investigated by FEM program. The one body molding model (Model 1) and air duct model (Model 2) are designed and their temperature distribution are analysed. The temperature rise value is about 105.5 deg in the model 1 and 65.28 de in the model 2. The temperature change of secondary winding is more than primary winding according to load ratio. The concentration part of Von Mises Stress occurs at interface between glass fiber and epoxy.