• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.1023-1030
• /
• 2001

The tensile properties of short nylon6 fiber reinforced NR and SBR have been investigated as functions of diameter ratio(DR), interphase condition, fiber aspect ratio(AR), and fiber content. The short-fiber(DR=3 and AR=2) reinforced SBR did not show the dilution effect for all interphase conditions. And the short-fiber(DR=3 and AR=2) reinforced NR did not show the dilution effect except for the no-coating. The better interphase condition, the lower dilution effect at same DR. The tensile moduli are significantly improved due to fiber content and diameter ratio at same interphase condition. The pull-out force increased with the DR. The better interphase condition, the higher pull-out force at same DR. It is found that the DR and AR have an important effect on tensile properties.

• 복식문화연구
• /
• 제19권1호
• /
• pp.19-30
• /
• 2011

The purpose of this study is to analyze the tendency of Korean traditional textile studies to review the studies critically and to suggest the new directions. To do this, this study included 164 articles of Korean traditional textile studies published in five Korean major journals from the first issue to the 2009. The identified 164 articles were categorized and analyzed by five areas : study subject, study content, study method, the tendency through times and journals publishing Korea traditional textile articles. The results were as follows. First, in the study subject, the ratio of traditional motifs study was the highest in any other study subject and an actual textile pattern study and society culture historic study were also favored. And, the ratio of foreign textile study was the lowest in any other study subject. Second, in the fiber type of study content, the ratio of silk fiber was the highest in any other fiber type. Hemp, ramie and cotton fiber were followed by silk fiber. Also, the ratio of wool fiber was lowest in any other fiber type. In the weaving type, ratio of plain weave was the highest in any other weaving type. In the times of study, the ratio of the Joseon Dynasty period was the highest in any other times of study. Third, in the study method, the ratio of an actual proof study method was higher than that of literature study method. In the tendency of times, there were society culture historic studies from the time publishing the first edition in each journal, the ratio of an actual textile pattern study, traditional motif study and preservation science study has increased since the 2000. Fourth, in the characteristics of journals, Journal of Korean Society of Costume has published the most articles in any other journal publishing Korea traditional textile study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.778-784
• /
• 2001

Injection molding is a very important industrial process for the manufacturing of plastics objects. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of weld-line parts in injection-molded products is assessed. And the effects of fiber content and injection molding conditions on the fiber orientation functions are also discussed.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.265-270
• /
• 2000

Injection molding is a very important industrial process for the manufacturing of plastics objects. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation· orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of weld-line parts in injection-molded products is assessed. And the effects of fiber content and injection molding conditions on the fiber orientation functions are also discussed

• 한국농공학회논문집
• /
• 제46권1호
• /
• pp.35-40
• /
• 2004

This study is performed to examine the physical and mechanical properties of eco-concrete using soil, natural coarse aggregate, excellent soil compound and polypropylene fiber. The test result shows that mass loss ratio is decreased with increasing the content of coarse aggregate and excellent soil compound. The compressive and flexural strengths are increased with increasing the content of coarse aggregate, excellent soil compound and polypropylene fiber. The coefficient of permeability is decreased with increasing the content of coarse aggregate and excellent soil compound, but it is increased in 0.2% polypropylene fiber content. The lowest coefficient of permeability is showed in $5.066\times 10^{-9}$cm/s. These eco-concrete can be used for farm road.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.433-440
• /
• 2001

This study was to analyze characteristics of soils reinforced by FPF(Fibrillated Polypropylene Fiber). Laboratory test, model test and field tests were performed on soils reinforced by fibers, to evaluate the shear strength characteristics. For the silty sand, clayey sand and silty clay, the influence of fiber shape, fiber length and fiber content were evaluated from compaction test, direct shear test, uniaxial test, california bearing ratio(CBR) test. Fibrillated type fiber, 5cm long with a content of 0.5% shows 5∼30% increase of friction angle and 7∼55 percent increase of CBR value.

• Journal of Nutrition and Health
• /
• 제30권5호
• /
• pp.465-477
• /
• 1997

The purpose of this article is to know the effects on bowel function of the kind of fiber and the amount of fiber in SD-rats. To do this experiment, we select of $\alpha$-cellulose as n insoluble cellulose source and alginic acid and pectin as soluble cellulose source. The rats diets contained callolose camcentrations of 1.0%, 3.6%, 6.0% and 10.0%. After that, we raised the SD-rats for 4weeks and measured the amount of food intake, body weight, the food effciency ratio, the length of liver and stomach the weight of the intestines, the transit time through the intestines, pH in feces, and the amount of bile acid and Ca, Mg, pp. 1) The amount of food intake was 15.75-31.00g/day. It was highest in the 10.0% cellulose group and the lowest in the 3.6% and 6.0% alginic acid group (p<0.05). The body weights of rats were 277.50-349.809. It was highest in the 1.0% pectin group and lowest in the 3.6% alginic acid group, 6.0% cellulose group, and 10.0% pectin group. It had differences according to the content fiber and the kind of dietary(p<0.01). The food efficiency ratio was (p<0.01). The higher the content of dietary fiber, the lower the calory and the food efficiency ratio. 2) Transit time was 446.0-775.0 minutes and it showed signidicant ifferences according to the content and kind of dietary fiber(p<0.01). It was long in the 1.0% cellulose group and 1.0% pectin group but short in the 10.0% alginic acid group. As the content of dietary fiber increased, the transit time through the intestines was shortened. The length of small intestine was 101.03-120.40cm and there were no difference cegardloss of the content and kind of fiber. The length of the large intestine was 20.92-25.42cm and there were significant differences according to the content and kind of the fiber. High-fiber diets resulted in increases in the length of the large intestine. 3) The weight of the liver was 8.68-10.96g and there were no differences according to the content and kind of fiber. The weight of stomach was 1.28-1.74g and there were no differences resulting from the kind of dietary fiber, but it was highest in the 10.0% alginic acid group. The weight of the small intestine was 5.52-8.04g with no difference resulting from to the kind of fiber. It was highest in the 10.0% the alginic acid group and lowest in the 1.0% alginic acid group(p<0.05). The weight of large intestine was 2.50-3.30g with no differences related to the kind of dietary fiber. It was heaviest in the 6.0% and 10.0% alginic acid groups and in the 10.0% pectin group with differences related to the content of fiber(p<0.05). 4) The pH of the feces was 5.82-6.86 according to the kind of dietary fiber, alginic acid group was high at 6.66, the cellulose group was 6.26. but the pectin group was low at 6.30. There were difference according to the content of fiber, but no consistency. The content of bile acid was 6.25-34.77umol per 1g of dry feces. According to the kind of dietary fiber, the alginic acid group was low at 12.91umol, cellulose group was 18.64umol and, the pectin group was the highest at 27.78umol(p<0.001). Based on the content of dietary fiber, alginic acid group was low at 1.0%, but high at 3.6% pectin group(p<0.001). 5) The amount of feces was 1.00-5.10g/day. The weight of rat feces was 2.23g/day in the alginic acid goup, 2.75g/day in the cellulose group, and 1.82g/day in the pectin group. According to the content of fiber, cellulose group was high at 10.0% but alginic acid group was 1.0%, and there were significant difference according to the dietary fiber. The more the content of fiber, the more increase the content of feces in alginic acid, cellulose and pectin group. The content of Ca in the feces was 80.10-207.82mg/1g of dry feces. In the dietary fiber, alginic acid group was 193.08mg, cellulose group was 87.5mg, pectin group was 138.16mg. In the content of fiber, alginic acid group was high at 1.0% and 3.6% but low at 10.0% of Pectin group. The content of Mg was 19.15-44.72mg/1g of dry feces. According to the kind of dietary fiber, alginic acid group was 35.33mg, cellulose group was 23.60mg, and pectin was 36.93mg. According to the content of fiber, pectin group was high at 1.0% and low at 10.0% of cellulose group. The content of P was 1.65-4.65mg/1g of dry feces. According to the kind of dietary fiber, alginic acid group 2.23mg/g dry feces, cellulose group was 2.29mg/g, pectin group wa 4.08mg/g dry feces. In the content of fiber, pectin group was high at 6.0% and low at 6.0% alginic acid group, but there were significant difference among the analysis value. The conetnt of Ca and MG was higher in soluble alginic acid group and pectin group than in insoluble cellulose group. The high the content of the dietary fiber, the lower the food efficiency ratio and the short the transit time through intestine with the increase of the length of large intestin as well as the higher level of the stomach, the small intestine and the large intestine. According to the content of the dietary fiber, the amount of the feces, Ca, Mg and P was increased but the length the small intestin, the weight of liver, pH of the feces and the amount of bile acid showed no differences and consistency.

• Advances in concrete construction
• /
• 제10권3호
• /
• pp.257-269
• /
• 2020

The aim of this study is to investigate the flexural performance of hybrid fiber reinforced self-compacting concrete (HFRSCC) having different ratio of micro and macro steel fiber. A total of five mixtures are prepared. In all mixtures, the sum of the steel fiber content is 1% and also water/binder ratio is kept constant. The amount of high range water reducer admixture (HRWRA) is arranged to satisfy the workability criteria of self-compacting concrete. Four-point bending test is carried out to analyze the flexural performance of the mixtures at 28 and 56 curing days. From the obtained load-deflection curves, the load carrying capacity, deflection and toughness values are investigated according to ASTM C1609, ASTM C1018 and JSCE standards. The mixtures containing higher ratio of macro steel fiber exhibit numerous micro-cracks and, thus, deflection-hardening response is observed. The mixture containing 1% micro steel fiber shows worst performance in the view of all flexural parameters. An improvement is observed in the aspect of toughness and load carrying capacity as the macro steel fiber content increases. The test results based on the standards are also compared taking account of abovementioned standards.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.15-22
• /
• 2008

Properties of pulp fibers can be modified by LbL multilayering technology. We evaluated the effect of stock composition on the polyelectrolyte multilayering performance of pulp fibers in this study. Stock composition was varied with pulp type and fines content. Three types of pulp-Hw-BKP, BCTMP and KOCC-were treated with polyelectrolytes of poly-DADMAC and PSS. Fines content of stock were controlled at 0, 10, 20, 30, and 40%. Zeta potential of pulp fibers and charge demand of filtrate were evaluated. The highest adsorption ratio was obtained for BCTMP because of its shortest fiber length and highest specific surface area. Higher fines content in the stock increased the adsorption ratio of polyelectrolyte onto pulp fiber and it required a higher amount of polyelectrolyte for charge neutralization. For the pulp stock with higher fines content, a higher level of polyelectrolyte and the increased layer number were required to modify and stabilize the electrochemical properties of pulp fibers.

• Composites Research
• /
• 제20권6호
• /
• pp.28-33
• /
• 2007

단섬유 강화고무의 관통 특성에 대해 섬유 종횡비(AR: 섬유 길이/섬유 직경), 섬유 함유량, 시편 크기 그리고 시험속도를 변수로 하여 연구하였다. 기지와 단섬유 강화고무의 관통 저항은 시편 크기의 증가에 따라 감소하였고, 동일한 시편 크기에서 시험 속도의 증가에 따라 관통 저항력은 증가하였다. 각각의 섬유 함유량에서 섬유 종횡비가 클수록 높은 관통응력 값을 보였다. 인장강도와 관통응력의 비교를 통해 시편 형상의 문제점에 대해 고찰하였다. 기지와 단섬유 강화고무의 막에 작용하는 힘은 시편의 크기에 관계없이 유사한 값을 보였고, 동일한 시편 크기에서 시험속도의 증가에 따라 증가하였다. 각각의 섬유함유량에서 섬유 종횡비가 클수록 막에 작용하는 힘은 크게 나타났다 전체적으로 시편 크기, 시험속도가 단섬유 강화고무의 관통 특성에 지대한 영향을 미침을 확인하였다.