• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.157-170
• /
• 1998

To investigate the most effective way of cellulase utilization on paper making process and the systematic way of how to combine its components for better use, purified two major cellulase were applied to bleached kraft pulp at various dosage in the refining process and estimated the synergism effect of each components in the characteristics of papermaking fiber. freeness was not changed by $C_1$ Component dosage but strongly increased by Cx Component dosage. Drop in fiber viscosity, increase in WQV, fiber shortening and fine generation was strongly influenced by Cx Component, it seems to be that Cx Component works a hydrogenate that breaks hydrogen bonding in fiber and enhances pooling effect of fiber. $C_1$ Component was little influenced these characteristics of fiber but considered to help to make fiber surface smooth.

• 한국전기전자재료학회논문지
• /
• 제32권6호
• /
• pp.477-482
• /
• 2019

This study investigated the influence of the viscoelastic property of slag when producing glass fiber, MFS631 with 60% of manganese slag, 30% of steel slag, and 10% of silica stone. To fabricate the MFS631 glass bulk, slag materials were placed in an alumina crucible, melted at $1,550^{\circ}C$ for 2 h, and then annealed at $600^{\circ}C$ for 2 h. It was found that glass is non-crystalline through X-ray diffraction analysis. MFS631 fiber was produced at speed in the range of 100~300 rpm at $1,150^{\circ}C$. The loss modulus (G") and storage modulus (G') of the produced glass fiber were evaluated at high temperatures. G' and G" of MFS631 were greater than $893^{\circ}C$, and the modulus value was 136,860 pa. This is similar to the results of a general E-glass fiber graph. Therefore, it was concluded that its spinnability is similar to that of E-glass fiber; therefore, it can be commercialized.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.451-454
• /
• 2002

The fiber optic communication technology is considered as a key solution for the future communication. However the assembly of the fiber optic components highly depends on manual or semi-automated alignment process. And the light search algorithm is recognized an important factor to reduce the manufacturing process time. Therefore this paper investigates optimal search algorithm for the automatic alignment of fiber optic components. The experiments show the effectiveness of Hill Climbing Search, Adaptive Hill Climbing Search and Steepest Search algorithms, in a view of process time.

• ETRI Journal
• /
• 제29권6호
• /
• pp.779-784
• /
• 2007

In this paper, we report the experimental results of a hybrid wideband fiber amplifier. The amplifying medium is a concatenated hybrid fiber consisting of Er-doped fiber (EDF) and dispersion compensating fiber (DCF). The gain mechanisms are based on stimulated emission in the EDF and stimulated Raman scattering (SRS) in the DCF. Since we simultaneously use optical amplification by the two processes, the gain bandwidth is easily expanded over 105 nm by a two-tone pumping scheme. Using an experimental setup constructed with a hybrid structure of EDF-DCF-EDF, we analyzed the spectral behavior of amplified spontaneous emission for pumping powers. We achieved an optical gain of over 20 dB in the wavelength range from 1,500 to 1,600 nm under optimized pumping conditions to make the spectral gain shape flat.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.147-151
• /
• 2004

In this study, an optical fiber assembly directly coupled with a laser diode or a photo diode is designed to confirm high reliable optical coupling efficiency of optical transmitter(Tx) and receiver(Rx). The optical fiber assembly is fabricated by soldering an optical fiber and a Kovar ferrule using a glass solder after inserting an optical fiber through a Kovar ferrule. The Kovar which has good welding characteristics is applied to introduce laser welding technique. The glass solder has excellent thermal characteristics such as thermal shift delamination compared with PbSn, AuSn solder previously used usually. Furthermore, the glass solder doesn't need fiber metalization and this enables low cost fabrication. However, the glass soldering is high temperature process over 35$0^{\circ}C$ and the convex shape after solidification due to surface tension causes the stress concentration on optical fiber. The stress concentration on the optical fiber increases the optical insertion loss and possibility of crack formation. The shape of glass solder was designed referring to 2-D Axi-symmetric FEM simulation. To test the mechanical reliability, mechanical vibration test and shock test were done according to Telcorida GR-468-Core protocol. After each test, the optical loss of the stress distributed fiber assembly didn't exceed 0.5 dB, which passes the test.

• 생명과학회지
• /
• 제9권5호
• /
• pp.497-503
• /
• 1999

Change on the structural carbohydrate(several fiberous components) was determined by vegetables(crown daisy and butterbur)-cultivated in Ulsan, Kyungnam, Korea-as its stage of maturity developed. Samples were separated into leaf and stem, which were dried at 7$0^{\circ}C$ for 24hr, and ground to pass a 1mm screen. They were subjected to moisture, crude protein, crude fat and several dietary fiber-DF(dietary fiber, include unavaible components), NDF(neutral detergent fiber), ADF(acid detergent fiber), lignin, hemicellulose, cellulose and protein corrected NDF(c-NDF), IDF(indigestible fiber, include lignin, hemicellulose and cellulose). In general, structural carbohytrate(several dietary fiber) of vegetable was affected by the growth stage. In case of crown daisy and butterbur, dietary fiber in leaf was higher than DF in stem.

• 한국식품영양학회지
• /
• 제8권2호
• /
• pp.116-127
• /
• 1995

Recently, interests of dietary fiber associated with critical physiological effects have been rising in Korea physiological effect in the body. In the present study, the contents of fiber components in 15 kinds of vegetables being consumed commonly in Korea were investigated, and the effects of various treatments (cooking and Kimchi fermentation) on fiber were studied. The results are summarized as follows. Fiber contents of vegetables were 11.8∼31.9% of neutral detergent fiber(NDF), total insoluble dietary fiber, 10.9∼25.4% of acid detergent fiber(ADF), 8.8∼23.8% of cellulose, 0.6∼10.6% of hemicellulose and 1.0∼5.2% of lignin, on dry weight basis. Especially, peppers had higher contents of NDF than the other vegetables. In the vegetables used in the present study, it was found that a great portion of NDF, total insoluble dietary fiber, was composed of cellulose because cellulose covered 63% of NDF. 'Cooking increased the NDF, ADF and cellulose contents, and most change was due to the change of cellulose. The values of hemicellulose and lignin showed an Irregular pattern upon cooking. Fermentation slightly increased NDF, ADF and cellulose, while hemicellulose and lignin showed irregular pattern.

• ETRI Journal
• /
• 제28권1호
• /
• pp.103-106
• /
• 2006

We have fabricated a planar lightwave circuit (PLC) hybrid-integrated optical sub-assembly of a triplexer using a thin film filter (TFF)-attached wavelength division multiplexer (WDM) and photodiode (PD) carriers. Two types of TFFs were attached to a diced side of a silica-terraced PLC platform, and the PD carriers with a $45^{\circ}$ mirror on which pin-PDs were bonded were assembled with the platform. A clear transmitter eye-pattern and minimum receiver sensitivity of -24.5 dBm were obtained under 1.25 Gb/s operation for digital applications, and a second-order inter-modulation distortion (IMD2) of -70 dBc was achieved for an analog receiver.

• 펄프종이기술
• /
• 제35권2호
• /
• pp.58-64
• /
• 2003

Because of its tendency of making strong Hoc on the fiber surface with fines, Meogujaengi has not been valued as a material of Hanji. As an attempt to manufacture high value-added products using the material made from Jumchihanji, this study performed morphological classification and chemical component analysis and selection of pulping of Meogujaengi method. As a result, it can be concluded as follows, 1. Meogujaengi is assumed to be a local variety of Broussonetia karinoki and its outward appearance is distinguished from Broussonetia kazinoki. 2. The bast fiber of Meogujaengi is longer and thinner than that of Broussonetia papyrifera or Broussonetia kazinoki. However, because of the coarse linear of fiber tissue, there are many clusters. 3. The cluster phenomenon of Meogujaengi is nothing to do with its chemical components. Although the contents of its chemical components are different from those of Broussonetia kazinoki, no component was found that obstructs pulping. 4. The pretreatment for suppressing the occurrence of clusters of Meogujaengi was effective, and it was necessary to do secondary beating using hollander beater after beating mixed with PAM using knife beater.

• 대한기계학회논문집A
• /
• 제30권2호
• /
• pp.112-119
• /
• 2006

Due to their intrinsic anisotropy, composite materials show quite complicated damage mechanism with their fiber orientation and stacking sequence and especially, their fatigue damage process is sequential occurrence of matrix cracking, delamination and fiber breakage. In the study, to propose new model capable of describing damage mechanism under fatigue loading, fatigue analysis of composite laminates based on damage mechanics, are performed. The average stress is disassembled with stress components of matrix, fiber and interlaminar interface through stress analysis. Each stress components are used to assess static damage analysis based on continuum damage mechanics (C.D.M.). Fatigue damage curves are obtained from hysteresis loop and assessed by the fatigue damage analysis. Then, static and fatigue damage analysis are combined. Expected results such as stress-cycle relation are verified by the experimental results of fatigue tests.