• 한국안전학회지
• /
• 제6권4호
• /
• pp.21-27
• /
• 1991

Acoustic Emission was monitored during tensile test and loading-holding-unloa-ding cycle test for two types (notched and unnotched) of CFRP specimens. AE activities showed that the fiber breakage during tensile tests depended upon the specimen geometry. We obtained new AE parameter such as the ration (damage ratio= AE events during unloading test / AE events during loading test) and the felicity ratio from which we investigated dynamic fracture process of CFRP specimens. The damage ratio of AE events was shown to be a good indicator to distinguish the generated fracture mechanism, such as fiber breakage and delamination. Also, ultrasonic testing results after loading-holding-unloading cycle test were good agreement with AE test results to detect defects or fiber breakage.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.336-341
• /
• 1998

Steel fiber reinforced concrete(SFRC) is a composite material possessing many physical and mechanical properties which are distinct from unreinforced concrete. The use of steel fiber reinforcement to improve the flexural and tensile strengths, extensibility and toughness of ordinary cement concrete is well known at present, but reinforcement of polymer concrete with steel fibers has been hardly reported untill now. The objective of this study was to improve the properties of the polymer concrete by addition of steel fibers. In this paper steel fiber reinforced polymer concrete is prepared with various steel fiber contents and aspect ratio($\ell$ /d), and their mechanical properties were investigated experimentally.

• International Journal of Safety
• /
• 제11권2호
• /
• pp.26-28
• /
• 2012

In this thesis, fracture tests were carried out in order to investigate the flexural strength behavior of FRC(fiber reinforced concrete) structures. FRC beams were used in the tests, the initial crack load and the ultimate load of the beams were observed under the static loading. According to the results, the ultimate loads increase with the fiber content, and these tendency is clear in the specimens with large fiber aspect ratio. From the results of the regression analysis, practical formulae for predicting the flexural strength of FRC were suggested.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.293-298
• /
• 1998

The result of an experimental study on the mechanical properties and durability of polypropylene fiber reinforced concrete are presented in this paper. This study has been performed to obtain the properties of PFRC such as strength, toughness and durability. The test variables are fiber content, fiber types, W/C ratio. PFRC shows the highest strength when the polypropylene fiber contents were increased to 2.0 vol.%. Also, freeze-thaw resistance and carbonation were somewhat more improved than plain concrete.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.336-343
• /
• 2000

Crack behavior of steel fiber concrete(SFC) and reinforced steel fiber concrete(RSFC) specimens has been experimentally and analytical investigated. Clack behavior of RSFC beams influenced by longitudinal reinforcement ratio, volume and type of steel fiber, strenth of concrete. It can be observed from experimental result that addition of steel fiber to concrete specimen reduce crack width and increases stiffness, and thus enhances the behavior in serviceability limit states also high cyclic loading

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권8호
• /
• pp.1230-1237
• /
• 2018

Objective: The present study was undertaken to determine an optimal balance between the amount of physically effective neutral detergent fiber (peNDF) to metabolizable glucose (MG) on rumen fermentation, blood metabolites and growth performance of 8 to 10-month-old heifers. Methods: A total of 15 healthy Holstein heifers weighing an average of 256 kg (8 month of age) were randomly assigned to three groups of five. Treatment diets consisted of the following three $peNDF_{8.0}/MG$ levels: 1.46 (Treatment A), 1.74 (Treatment B), and 2.08 (Treatment C). Results: The results showed that the ratio of $peNDF_{8.0}/MG$ affected rumen fermentation, blood metabolites and growth performance of heifers. The average daily gain of heifers tended to decrease as the ratio of $peNDF_{8.0}/MG$ increased (p = 0.07). The concentrations of blood urea nitrogen, triglyceride, and cholesterol increased significantly (p<0.05), while the high-density lipoprotein concentration decreased (p<0.05). After feeding 2 h and 4 h, insulin concentration in Treatment A was greater than Treatment C (p<0.05). Propionate concentration had decreasing trend (p = 0.07); acetate to propionate ratio and non-glucogenic to glucogenic volatile fatty acid (NGR) increased significantly (p<0.05). In addition, the digestibility of dry matter, crude protein, neutral detergent fiber, and acid detergent fiber decreased significantly (p<0.05). Conclusion: The present investigation indicated that dietary $peNDF_{8.0}/MG$ ratio can affect the growth and development, blood metabolites, rumen fermentation and apparent digestibility of heifers, and the optimal dietary $peNDF_{8.0}/MG$ ratio for 8 to 10-month-old heifers in the present study was 1.46.

• 한국잠사곤충학회지
• /
• 제39권1호
• /
• pp.62-66
• /
• 1997

The MAA graftings in silk fiber were done by redox system for the purpose of investingating the effect of ferrous sulfate additive on the grafting rate and graft ratio in various conditions. The graft ratio was higher in redox graft system than in peroxide graft system and the graft ratio in redox graft system was also higher depending on decrease of ferrous sulfate additive. The saturation graft ratio obtained by empirical equation, log X=K/t, was increasing depending on the increase of ferrous sulfate additive. Initial grafting rate was increased but the latter grafting rate was decreased in redox graft system. The effects of liquor ratio(L.R.) on the graft ratio in redox graft system, were higher in high L.R. than in low L.R..

• 산업기술연구
• /
• 제19권
• /
• pp.163-172
• /
• 1999

This study is conducted on the flexural toughness and flexural fatigue test to fine the mechanical properties of steel fiber reinforced rapid-set cement concrete. Experimental investigation is examined according to fiber contents(0, 0.4, 0.7, 1.0, 1.5%), fiber aspect ratio(58, 60, 83), fiber type (hooked, crimped fiber), and cement type (normal portland & rapid-set cement). The principal results obtained through this study are as follows; toughness and fatigue resistance tend to considerably increase with fiber contents, fiber aspect ration. And hooked fiber is improved better than crimped fiber. Concrete using rapid set cement is increased strength properties compared with concrete using normal portland cement, but relative strength properties behavior and fatigue resistance show a tendency to decrease a little.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.21-22
• /
• 2013

Nowadays, the fiber which mixed with concrete matrix always has low adhesion with cement paste. It's difficult to use fiber to reinforce the structure. For more adding fiber in concrete would cause some problems as the low flowability and surface polishing. Further study is needed in fiber using. In this research, further study in fiber reinforced concrete has been invested. Various fibers with different properties have been used to prevent cracking. Fiber reinforced concrete's fundamental properties as slump, air content, compressive strength and tensile strength have been tested. Optimum type of the fiber and optimum addition ratio of fiber has been invested to increase the utility of the fiber which used in concrete.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.697-704
• /
• 2017

고성능 섬유보강 시멘트 복합체(High-Performance Fiber-Reinforced Cement Composites, HPFRCC)는 내구성 및 연성이 우수할 뿐만 아니라, 강도발현이 뛰어나 구조부재 적용 시 단면을 상당히 감소시켜 자중을 줄일 수 있는 재료로 관심을 받고 있다. 이에 본 연구에서는 HPFRCC에 사용 가능한 다양한 강섬유 종류 및 강섬유의 특성에 따라 휨 실험을 수행하였으며, 휨 성능 분석을 통해 효율적인 섬유보강 방법을 모색하여 경제성을 향상시키고자 하였다. 따라서 보다 효율적인 섬유보강 방법을 찾기 위해 기존길이 13 mm 보다 긴 강섬유를 소성 변형시킨 갈고리형 강섬유, 비틀림 강섬유를 사용하여 섬유의 모양(shape), 형상비(aspect ratio) 혼입율에 대한 휨 특성을 평가하고 분석하고자 하였다. 실험결과 HPFRCC에 일자형태를 가지는 길이 19.5 mm의 강섬유를 1.5%만큼 혼입할 경우 기존에 많이 사용되고 있는 길이 13 mm의 일자형 강섬유를 2.0% 혼입하였을 때 보다 뛰어난 휨 성능을 나타내었다. 따라서 섬유량을 줄여줄 수 있기 때문에 보다 경제성이 우수한 강섬유 보강 HPFRCC를 제조할 수 있을 것으로 판단되었다.