• Archives of Reconstructive Microsurgery
• /
• 제15권1호
• /
• pp.1-9
• /
• 2006

The purpose of this study is to determine the effects of selective inducible nitric oxide synthase (iNOS) inhibitor N-[3-aminomethyl]benzyl]acetamidine (l400W) on the reperfused cremaster muscle. The extracellular superoxide dismutase knockout ($EC-SOD^{-/-}$) mice was used to make the experimental window for ischemia-reperfusion injury. The muscle was exposed to 4.5 h of ischemia followed by 90 min of reperfusion and the mice received either 3 mg/kg of 1400W or the same amount of phosphate buffered saline (PBS) subcutaneously at 10 min before the start of reperfusion. The results showed that 1400W treatment markedly improved the recovery of the vessel diameter and blood flow in the reperfused cremaster muscle compared to that of PBS group. Histological examination showed reduced edema in the interstitium and muscle fiber, and reduced nitrotyrosine formation (a marker of total peroxinitrite ($ONOO^-$) in 1400W-treated muscle compared to PBS. Our results suggest that iNOS and $ONOO^-$ products are involved in skeletal muscle I/R injury. Reduced I/R injury by using selective inhibition of iNOS is perhaps via limiting cytotoxic $ONOO^-$ generation, a reaction product of nitric oxide (NO) and superoxide anion ($O_2^-$). Thus, inhibition of iNOS appears to be a good treatment strategy in reducing clinical I/R injury.

• 대한수의학회지
• /
• 제55권1호
• /
• pp.21-30
• /
• 2015

The immune system is specifically sensitive to oxidative stress induced by ionizing radiation because of its rapid proliferative activity. For this reason, an instructive immune system is one of the best ways to minimize side effects, such immunodeficiency, of gamma radiation. Over the past few decades, several natural plants with antioxidant and immunomodulatory properties have been identified as adjuncts for nontoxic and successful radiotherapy. Hizikia fusiforme extract (HFE) containing plentiful dietary fiber and fucoidan is known for its instructive antioxidant capacity, immunomodulation abilities, and immune activation. In this study, we determined whether HFE protects radiosensitive immune cells from gamma radiation-induced damage. C57BL/6 mice were irradiated with gamma-ray. The effect of HFE on the ionizing radiation damage of immune cells was then evaluated with an MTT assay, 3H-thymidine incorporation assay, and PI staining. We found that HFE stimulated the proliferation of gamma-ray irradiated immune cells without cytotoxic effects. We also observed that HFE not only decreased DNA damage but also reduced gamma radiation-induced apoptosis of the immune cells. Our results suggest that HFE can protect immune cells from gamma-ray damage and may serve as an effective, non-toxic radioprotective agent.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.386-389
• /
• 1999

Amphoteric polymers have brought to papermakers' attention gradually. In this paper, a series of amphoteric starches with different cationic and anionic degree of substitution (DS) are prepared. Better product has been selected and used under different condition. As retention and drainage aids, amphoteric starches were used in shorter fiber length, weak strength and poor drainage bleached AQ-Soda wheat straw pulp. In neutral and alkaline papermaking system, when amphoteric starches contain 0.024-0.026 anionic degree of substitution (DS), it is shown that the higher the cationic degree of substitution (DS) in amphoteric starches, the better the filler retention. The filler retention is improved 12.5%, 30.3%, and 35.1% and 32.5% respectively by adding 1% amphoteric starch LS-L2 -1 (0.034), LS-L2-2 (0.040), LS-L2-3 (0.047) and LS-L2-4 (0.052). But the strength of handsheets if affected a little. By adding 2% Al2 (SO4)3 and 1.5% LS-L2-3 at pH 7.5, filler retention can be improved from 38% to 80%, and breaking length of sheet only decreases 3.2%. As dry strengthening aids, amphoteric starches were used in eucalyptus APMP. Amphoteric starches are used in eucalyptus APMP. The amphoteric starch LS-L2-2 is better dry strength aid. Adding 1% LS-L2-2 can improve breaking length 24.5%, burst index 42.9%, tear index 38.8%, folding endurance and density of the handsheets.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.294-301
• /
• 2013

Sustainable fashion & textile is more than eco fashion & textile with the concepts for the next generation's happiness, prosumer value, and community responsibility. This study considers methods to enhance fashion and textile industry sustainability in accordance to clothing types (material, product life and washing properties) and to investigate company strategies. Company strategies are of redesign with stock, volunteering & measuring trash amount, participation by evaluation stores, clerk environment education, hiring QC specialist and reinforcing partnerships. For the case of daily innerwear, throwing away and recycling is more efficient for the environment than laundering in the consumer use stage; subsequently, we recommend the use of polypropylene fiber (a cheap and an eco-friendly material) for this item that can be recycled and reformed after use. For the case of single layer clothing (such as sportswear, blouse or pants) we recommend the use of thermoplastic materials with welding or fuse assembling technology instead of a sewing method of seams as well as the recycle design that is simply melted and reformed into new clothing without an after use dissembling process. Secondhand use or resale is suitable for denim/jean items if the clothing has a storytelling or private history tag. Lastly, module-type jacket or coat shows the variety of styles with one clothing worn w/o collar or sleeve details and changed into vest/coat; in addition, it is possible to add or partly tear off some jacket/coat fibers of the felt material to reform it into a new design.

• 한국응용과학기술학회지
• /
• 제14권1호
• /
• pp.77-87
• /
• 1997

PFO(pyrolized fuel oil) and $C_{10}^{+}$ oil, which are the residual heavy oils form a NCC(naphtha cracking center), were heat-treated to produce the precursor-pitch for carbon materials. After PFO was initially distilled near $300^{\circ}C$ to separate the volatile matters recovering as high-quality fuel oil, the residuum of nonvolatile precursor-pitch was then thermally pyrolized in the temperature ranges from $350^{\circ}C$ to $450^{\circ}C$. Spinnable isotropic pitch with the softening point of $200^{\circ}C$ and the toluene insolubles of 36wt% was obtained at $365^{\circ}C$, and then was successfully spun through a spinneret(0.5mm diameter). After spinning, an isotropic carbon fiber of $25{\mu}m$ diameter was obtained via oxidation and craboniation procedures. Mesophase spherules began to be observed from the product pitch pyrolized at $400^{\circ}C$, and bulk mesophase with a flow texture was observed above $420^{\circ}C$. In the case of $C_{10}^{+}$ was the feed was polymerized in the presence $H_2SO_4$ at room temperature to increase the molecular weight and then heat-treated gradually up to $200{\sim}250^{\circ}C$. The products obtained with the softening point of $80{\sim}190^{\circ}C$ were carbonized at 500 and $1000^{\circ}C$ to examine the morphology.

• 자원리싸이클링
• /
• 제11권4호
• /
• pp.11-16
• /
• 2002

폐자동차 파쇄를 통한 주요구성물질의 분리 및 분석평가를 위한 현장실험을 수행하였다. 모재인 폐자동차 차피로는 국내 자동차 업체에서 제작한 Sonata II, Sephia 및 Prince의 3종을 선택하여 엔진부분과 타이어 및 문짝 등을 미리 제거하고 압축된 상태로 제공받았다. 현장설비의 주요 공정은 pre- 및 main-shredder, 분급기, 자선기, 와류선별기 및 수작업 분리로 구성되어 있었다. shredder 산물의 현장 분리실험결과 철 스크랩이 전체의 60.1%를 차지하여 가장 비중이 높았으며, 알루미늄, 구리 및 아연 등의 비철금속류는 약 2％ 정도인 것으로 나타났다. Light fluff는 fluff 전체 중량의 90% 정도를 차지하는 것으로 관찰되었으며, 5cm undersize 가 70.5%로써 대부분이었고 나머지는 플라스틱, 섬유 및 스폰지 등으로 구성되어 있었다 heavy fluff의 경우에는 고무와 플라스틱이 주구성물질인 것으로 나타났으며, 발열량의 경우 플라스틱이 10,000 cal/gr을 상회하여 가장 높았고 가죽과 고무류가 각각 10.3 및 2.55 wt％의 비교적 높은 CI함량을 보였다.

• 한국연초학회지
• /
• 제28권1호
• /
• pp.36-42
• /
• 2006

The papermaking process for a reconstituted tobacco sheet (RECON) has been preferred more because of the various merits such as a wide range of Recon products with better quality. The screw press is one of the very important process in RECON making process which divides the mixed raw materials into the soluble material and the insoluble material and could greatly affect the productivity and product quality. In this study, the characteristics of the screw press process in a Recon making mill were evaluated for two different RECON products. Three different efficiency index were proposed for the more detailed analysis of the screw press process. The result showed that the difference in the raw material might result in the difference in the efficiency and the properties of the extracts and the filter cake, especially in the HWS. The washing technique which applied in this experiment showed the amount of residual HWS in the fiber portion were not much changed by the each steps of the screw press.

• 공업화학
• /
• 제1권2호
• /
• pp.197-206
• /
• 1990

이미다졸린 핵에 유연성을 부여하기 위하여 소수성기로서 behenic acid를 선택하고 3종류의 polyalkylene polyamine 과 반응시켜 1, 2-이치환 이미다졸린 화합물인 1-behenoyl-aminoethyl-2-heneicosylimidazoline(BHI), 1-behenoylbis(aminoethyl)-2-heneicosylimidazoline(BBI) 및 1-behenoyltris(aminoethyl)-2-heneicosylimidazoline(BTI)을 합성하였다. 동 화합물들을 4급화 시켜 1, 2-이치환 이미다졸린 염화물인 1-behenoylaminoethyl-1-glycidyl-2-heneicosylimidazolinium chloride(BHIC), 1-behenoylbis(aminoethyl)-1-glycidyl-2-heneicosylimidazolinium chloride(BBIC) 및 1-behenoyltris(aminoethyl)-1-glycidyl-2-heneicosylimidazolinium chloride(BTIC)를 합성하였다. BHI, BBI 및 BTI 합성의 최적조건은 $210^{\circ}C$에서 8시간이었으며 BHIC, BBIC 및 BTIC 합성에서 BHIC는 BHI-epichlorohydrin의 mole ratio가 1:1.3, BBIC와 BTIC는 mole ratio가 1:1.5 이상일 때 완전 4급화가 이루어졌다. BHIC, BBIC 및 BTIC에서 유연제 BHICS, BBICS 및 BTICS를 제조한 후 아크릴 섬유에 유연처리를 하여 유연성을 측정한 결과 양호한 유연제임이 밝혀졌다.

• 한국식품영양학회지
• /
• 제33권3호
• /
• pp.331-338
• /
• 2020

The purpose of this study was to examine the effect of noni (Morinda citrifolia) powder on the physicochemical properties and antioxidant activities of ground pork meat. Four samples of ground pork meat were prepared as follow: CON without noni powder, NP0.5 with 0.5% noni powder, NP1.0 with 1.0% noni powder, and NP1.5 with 1.5% noni powder. The moisture content of CON was the highest (p<0.05). The ash, fiber, fat retention, hardness, cohesiveness, gumminess, chewiness, lightness, and yellowness increased with the addition of the noni powder (p<0.05). The protein, fat, water holding capacity, cooking yield, moisture retention, springiness,and redness of the cooked meat were not significantly different among the samples. The pH of CON was the highest among the samples (p<0.05). The TBARS of CON, NP0.5, NP1.0, and NP1.5 were 0.48, 0.41, 0.36 and 0.34 mg/kg, respectively, and the NP1.5 was the lowest (p<0.05). The DPPH radical scavenging activity of CON, NP0.5, NP1.0, and NP1.5 were 10.4%, 20.8%, 34.6% and 45.3%, respectively, and the NP1.5 was the highest (p<0.05). Consequently, these results support the possible use of noni powder for meat product industry, as addition of noni powder enhances the antioxidant activities of ground pork meat.

• 한국해양환경ㆍ에너지학회지
• /
• 제10권3호
• /
• pp.167-172
• /
• 2007

FRP 선박의 recycle에 대한 현재의 연구방향은 여러 가지로 분류 할 수 있다, 그러나 현재의 기술적, 사회경제적 관점에서 가장 선호되는 방법은 '기계적 방법'으로 파쇄와 분쇄를 거친 후 화학적 처리 또는 추가 첨가제 등을 활용하여 재활용 또는 재사용하는 방법이다. 따라서 세계 각국에서는 FRP선박의 페처리 또는 재활용(재자원화)을 위하여 실용성과 안정성을 지니는 많은 기계적 방법에 대한 연구 개발을 진행하여왔다. 그러나 많은 연구가 진행되어 왔음에도 기계적 처리 방법의 두 가지 문제, 즉 파쇄공정 중의 2차오염 및 재자원화 용도의 한계가 아직도 기계적 재활용의 확대를 어렵게 하고 있다. 본 논문에서는 이 두 문제에 대한 적극적 해결 방안으로서 FRP의 복합재료특성(직교 이방성과 복합적층 구조 등)을 응용한 파쇄 및 파쇄물의 친환경적 분류 처리 방안을 설명하고자 한다.