• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.589-597
• /
• 2009

고인성 섬유보강 시멘트 복합체는 시멘트 매트릭스 내 보강된 섬유의 계면부착응력에 의해 다수의 미세균 열분산 및 손상저항성능을 갖게 되나, 이를 구조물에 적용하기 위해서는, 고인성 섬유보강 시멘트 복합체의 파괴거동을 규명함과 동시에 보강섬유에 따른 시멘트 매트릭스의 마이크로 파괴메커니즘에 대한 이해가 요구된다. 이 연구에서는 단조 및 반복가력시 고인성 섬유보강 시멘트 복합체의 파괴특성 및 음향방출신호특성을 규명하기 위하여 총 4 시리즈의 시험체가 사용되었으며, 주요 실험변수는 섬유의 종류(PE, PVA, SC), 혼입률, 하이브리드 타입, 가력방법(단조, 반복)이다. 실험결과, 고인성 섬유보강 시멘트 복합체의 압축거동에 따른 손상진전은 섬유의 혼입률 및 하이브리드에 따라 상이하게 나타났다. 또한 음향방출신호로부터, 각 하중단계의 2, 3번째 사이클에서의 진폭 감소 특성이 나타났으며, 이는 각 사이클별 변형률 증가와의 관련성을 보여 이를 이용한 강도 예측이 가능할 것으로 판단된다. 또한 최대강도의 80%까지 펠리시티 효과 및 카이저 효과가 나타났으며, 하이브리드 섬유 혼입시 매크로 균열 제어로 인해 손상의 복원 및 분산능력이 뛰어난 것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.250-255
• /
• 2000

Damage induced by low velocity impact loading in aircraft composite laminates is the form of failure which is occurred frequently in aircraft. Low velocity impact can be caused either by maintenance accidents with tool drops or by in-flight impacts with debris. As the consequences of impact loading in composite laminates, matrix cracking, delamination and eventually fiber breakage for higher impact energies can be occurred. Even when no visible impact damage is observed, damage can exist inside of composite laminates and the carrying load of the composite laminates is considerably reduced. The reduction of strength and stiffness by impact loading occurs in compressive loading due to laminate buckling in the delaminated areas. The objective of this study is to determine inside damage of composite laminates by impact loading and to determine residual compressive strength and the damage growth mechanisms of impacted composite laminates. For this purpose a series of impact and compression after impact tests are carried out on composite laminates made of carbon fiber reinforced epoxy resin matrix with lay up pattern of $[({\pm}45)(0/90)_2]s$ and $[({\pm}45)(0)_3(90)(0)_3({\pm}45)]$. UT-C scan is used to determine impact damage characteristics and CAI(Compression After Impact) tests are carried out to evaluate quantitatively reduction of compressive strength by impact loading.

• Composites Research
• /
• 제26권2호
• /
• pp.91-98
• /
• 2013

복합재 이중-겹침 볼트 체결부의 파손을 예측하기 위해 손상계수를 고려한 강성저하 방법과 Hashin의 3차원 파손판정식에 근거한 3차원 유한요소해석 방법을 제안하였다. 기지 혹은 면내(In-plane) 전단 손상을 고려하기 위해 손상변수를 이용하는 Ladeveze 이론을 섬유방향 강성저하와 연계하여 사용하였고, 수지 압축/전단, 수지 인장/전단, 섬유압축, 섬유 인장 등 4가지 파손모드를 고려하였다. 상업용 유한요소 프로그램인 ABAQUS를 이용하여 마찰력과 볼트 체결력을 고려하였고, 강성저하모델 처리를 위해 ABAQUS의 사용자 정의 부프로그램을 이용하였다. 제안된 유한요소해석 방법을 검증하기 위해 복합재 이중겹침 볼트 체결부 시험 결과와 파손강도를 비교한 결과 7~16% 오차를 보임을 확인하였다.

• 폴리머
• /
• 제28권4호
• /
• pp.285-290
• /
• 2004

전기적-미세역학 시험법을 이용하여 탄소 나노튜브와 탄소 나노섬유로 강화된 에폭시 복합재료의 비파괴 손상 감지능에 대해 고찰하였다. 카본블랙은 탄소 나노튜브 및 탄소 나노섬유와 비교하기 위해 사용하였다. 두 기지 복합재료 시험에서 탄소 섬유의 파단은 전기저항 변화 측정과 함께 음향방출을 이용하여 동시에 감지하였고 탄소나노복합재료 내부에 함침된 탄소 섬유에 대한 응력 감지는 반복 하중 하에서 전기적-pullout 시험법을 이용하여 수행하였다. 같은 부피 함량에서 섬유파단, 기지재료 변형 및 응력에 대한 감지능은 탄소 나노튜브/에폭시 복합재료에서 가장 높았으며, 카본블랙의 경우가 가장 낮았다. 전기적물성 및 손상 감지능은 탄소나노복합재료의 형상학적인 관찰 결과와 상호 비교하였다. 본 연구에서 탄소 나노재료의 균일한 분산은 손상 감지능을 높이기 위한 가장 중요한 요인으로 고려되며, 탄소 나노복합재료에 대한 손상감지는 전기저항측정과 음향 방출을 이용하여 비파괴적으로 평가할 수 있었다.

• Preventive Nutrition and Food Science
• /
• 제3권4호
• /
• pp.351-355
• /
• 1998

The purpose of this study was to investigate the effect of protein and dietary fiber levels on the activities of ehanol metabilizing enzymes of the brain in acute and chronic ethanol-treated rats. Male Sprague-Dwley rats were fed on diets containing two levels of protein(7%, 20%)) with two levels of fiber(5%, 105) for 5 weeks. Rats were orally administered 40% (v/v) ethanol(5g/body weight) 90 min before decapitation in the acute ethanol-treated groups and 25% (v/v) ethanol (5g/kg body weight) once a day for 5 weeks in the chronic ethnol-treated groups. Cytosilic alcohol dehydrogenase (ADH) activities were higher than those of mitochondrial ADH. The ADH activities were increased by 20% protein and %% fiber levels in the diet in two fractions , but were decreased by chronic ethanol treatment. Mitochondrial aldehyde dehydrogenase (ALDH) activities did not change by ethanol treatment but were increased by the 20% protein level. However, cytosilic ALDH activities were decreased by chronic ethanol treatment at the 5% fiber level and did not change with protein levels. Both ALDH activities were higher in the 10% fiber groups than the 5% fiber groups. Cytochrome P-450 contents were significantly increased in the chronic ethanol-treated groups but xanthine oxidase (XO) activities did not change. P-450 contents and XO activities were significantly decreased in both the low protein and fiber groups.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1402-1405
• /
• 2003

The main object of this study was evaluated by the delamination damage for fiber stacking angle. Therefore, this work need to compare the shape of delamination for a different fiber stacking angie. So this study uses a method of fatigue test which was created [0]$_2$,[+45]$_2$[90]$_2$. The extension of the delamination zone formed between aluminium alloy and glass fiber-adhesive layer were measured by an ultrasonic C-scan image. As a result, the shapes of delamination zone don't depend upon the crack propagation. We could know that the delamination zone grew interaction between stress flow of fiber layer and crack driving force. Hence, the existing study were applied to the stress transfer, fiber bridging effect, delaminantion growth rate should need to the develop useful factor because of change of fiber stacking angle.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.27-34
• /
• 2018

PURPOSES : The objective of this study is to evaluate the physical properties of recycled asphalt mixtures reinforced with glass fiber. METHODS : Firstly, mixing design was conducted on recycled asphalt mixture for use of 50% recycled aggregate. Various laboratory tests were performed on four types of recycled asphalt mixtures with different glass fiber content to evaluate the physical properties. The laboratory tests include indirect tensile strength test, dynamic modulus test, Hamburg wheel tracking test and tensile-strength ratio to evaluate cracks, rutting and moisture resistance of mixtures. RESULTS : The indirect tensile strength of fiber reinforced glass increased about 139.4%. As a result of comparing the master curves obtained by the dynamic modulus test, the elasticity was low in the low temperature region and high in the high temperature region when the glass fiber was reinforced. The glass fiber contents of PEGS 0.3%, Micro PPGF 0.1% and Macro PPGF 0.3% showed the highest moisture resistance and rutting resistance. CONCLUSIONS : The test results show that use of glass fiber reinforcement can increase the resistance to cracking, rutting, and moisture damage of asphalt mixtures. It is also necessary to validate the long-term performance of recycled asphalt mixtures with glass fiber using full scale pavement testing and field trial construction.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.1-7
• /
• 2007

Internal fibrillation of pulp fiber is an important factor affecting paper properties. Internal fibrillation of pulp fiber is usually introduced with several kinds of modifications of fiber by the mechanical treatment such as refining, high shear and/or high consistency mixing, etc. Unfortunately there are no standardized methods that can characterize the extent of internal fibrillation and its contribution on the paper properties. The purpose of this study is to try and find the potential methods that can characterize the internal fibrillation of pulp fiber quantitatively. Softwood bleached kraft pulp was treated with Hobart mixer to introduce the internal fibrillation without the significant fiber damage and external fibrillation. The extent of internal fibrillation was increased with the increase of mechanical treatment consistency. Several fiber properties were measured to find the potential means that could characterize and quantity the internal fibrillation. Laminated area could not be used as a means for quantifying the internal fibrillation because of the effect of swelling and the different internal fibrillation behavior at different mechanical treatment consistency. Micro and macro internal fibrillation models were proposed for describing the different behavior for the mechanical treatment at low and high consistencies of pulp. The Internal fibrillation showed good correlation with swelling of fiber wall. This trend was confirmed through the measurement of wall thickness and/or cross section area of fiber. Therefore the internal fibrillation possibly can be described as the indices indicating the change of wall thickness and/or cross section area.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.132-133
• /
• 2020

The aim of this study is to evaluate the combination effect of amorphous steel fiber and polypropylene fiber on spalling of the 150MPa level ultra high strength concrete. Considering spalling has a great relationship with water vapor pressure, this paper is focusing on water vapor pressure. The test specimens were heated accordance with ISO-834 Standard Curve using electric heating furnace, the depth of 10mm water vapor pressure formation was tend to get faster and spalling damage become severe when the mixing proportion of amorphous steel fiber increase. When using ultra high strength concrete reinforced with amorphous steel fiber, further research about proper mixing proportion of polypropylene fiber.

• Structural Monitoring and Maintenance
• /
• 제10권4호
• /
• pp.299-314
• /
• 2023

Long-gauge carbon fiber line (CFL) sensors have received considerable attention in the past decade. However, there is still a need for an in-depth investigation of their measuring accuracy. This study investigates the accuracy of carbon fiber line sensors to monitor and differentiate the flexural behavior of two beams, one reinforced with steel bars alone and the other reinforced with steel and basalt fiber-reinforced polymer bars. A distributed set of long-gauge carbon fiber line, Fiber Bragg Grating (FBG), and traditional strain gauge sensors was mounted on the tensile concrete surface of the studied beams to compare the results and assess the accuracies of the proposed sensors. The test beams were loaded monotonically under four-point bending loading until failure. Results indicated the importance of using long-gauge sensors in providing useful, accurate, and reliable information regarding global structural behavior, while point sensors are affected by local damage and strain concentrations. Furthermore, long-gauge carbon fiber line sensors demonstrated good agreement with the corresponding Fiber Bragg Grating sensors with acceptable accuracy, thereby exhibiting potential for application in monitoring the health of large-scale structures.