Browse > Article
http://dx.doi.org/10.4334/JKCI.2009.21.5.589

Assessment of the Damage in High Performance Fiber-Reinforced Cement Composite under Compressive Loading Using Acoustic Emission  

Kim, Sun-Woo (Dept. of Architectural Engineering, Chungnam National University)
Yun, Hyun-Do (Dept. of Architectural Engineering, Chungnam National University)
Publication Information
Journal of the Korea Concrete Institute / v.21, no.5, 2009 , pp. 589-597 More about this Journal
Abstract
High Performance Fiber-reinforced Cement Composite (HPFRCC) shows the multiple crack and damage tolerance capacity due to the interfacial bonding of the fibers to the cement matrix. For practical application, it is needed to investigate the fractural behavior of HPFRCC and understand the micro-mechanism of cement matrix with reinforcing fiber. This study is devoted to the investigation of the AE signals in HPFRCC under monotonic and cyclic uniaxial compressive loading, and total four series were tested. The major experimental parameters include the type and volume fraction of fiber (PE, PVA, SC), the hybrid type and loading pattern. The test results showed that the damage progress by compressive behavior of the HPFRCC is a characteristic for the hybrid fiber type and volume fraction. It is found from acoustic emission (AE) parameter value, that the second and third compressive load cycles resulted in successive decrease of the amplitude as compared with the first compressive load cycle. Also, the AE Kaiser effect existed in HPFRCC specimens up to 80% of its ultimate strength. These observations suggested that the AE Kaiser effect has good potential to be used as a new tool to monitor the loading history of HPFRCC.
Keywords
HPFRCC; damage tolerance capacity; compressive behavior; AE signals; Kaiser effect;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Fukuyama, H., Suwada, H., Mukai, T., Watanabe T., and Nomura, S., "Structural Test on High Performance Seismic Resistance Elements with High Strength, Stiffness, Ductility," Proceedings of AIJ annual meeting, Structure IV, 2005, pp. 487-490
2 Kumar, A. and Gupta, A. P., "Acoustic Emission in Fiber Reinforced Concrete," Experimental Mechanics, Vol. 36, No. 3, 1996, pp. 258-261   DOI
3 윤현도, 김선우, 전에스더, "보강섬유 종류에 따른 고인성 시멘트 복합체의 손상과정 및 음향방출특성," 대한건축학회 구조계 논문집, 22권, 9호, 2006, pp. 35-42
4 Yuyama, S., Okamoto, T., and Nagataki, S., "Acoustic Emission Evaluation of Structural Integrity in Repaired Reinforced Concrete Beams," Materials valuation, Vol. 52, No. 1, 1994, pp. 86-90
5 Yun, H. D., S. Kim, W., Jeon, E., and Park, W. S., "Effect of Matrix Ductility on Damage Tolerance of Digonally Reinforced Coupling Beams," Key Engineering Materials, Vol. 324-325, 2006, pp. 723-726   DOI
6 Hsu, T. T. C., Slate, F. O., Sturman, G. M., and Winter, G., "Micro-cracking of Plain Concrete and the Shape of the Stress-Strain Curve," ACI Journal, Proceedings, Vol. 60, No. 2, 1963, pp. 209-224
7 Naaman, A. E. and Najm, H., "Bond-Slip Mechanisms of Steel Fibers in Concrete," ACI Material Journal, Vol. 88, No. 2, 1991, pp. 135-145
8 Ohtsu, M. and Watanabe, H., "Quantitative Damage Estimation of Concrete by Acoustic Emission," Construction and Building Materials, Vol. 15, 2001, pp. 217-224   DOI   ScienceOn
9 Puri, S., "Assessing the Development of Localized Damage in Concrete under Compressive Loading Using Acoustic Emission," Purdue University, 2003, 111 pp
10 Colombo, Ing. S., Main, I. G., and Forde, M. C., "Assessing Damage of Reinforced Concrete Beam Using b-value Analysis of Acoustic Emission Signals," Journal of Materials in Civil Engineering, Vol. 15, No. 3, 2003, pp. 280-286   DOI   ScienceOn
11 Maji, A. K. and Shah, S. P., "Process Zone and Acoustic Emission Measurement in Concrete," Experimental Mechanics, Vol. 28, No. 1, 1988, pp. 27-33   DOI
12 Li, V. C. and Wu, H. C., "Conditions for Pseudo Strainhardening in Fiber Reinforced Brittle Matrix Composites," Journal Applied Mechanics Review, Vol. 45, No. 8, 1992, pp. 390-398   DOI
13 Yun, H. D., Kim, S. W., and Jeon, E., "Tensile Response and Fracture Process of High-Performance Hybrid Fiber-Reinforced Cement Composites," Key Engineering Materials, Vol. 324-325, 2006, pp. 715-718   DOI
14 김윤용, 김정수, 김진근, 하기주, “고인성 섬유복합재료 ECC (Engineered Cementitious Composites)의 시공성,” 한국콘크리트학회 학술발표논문집, 17권, 1호, 2005, pp.313~316   과학기술학회마을
15 하기주, 신종학, 김윤용, 홍건호, 양승혁, 김진근, "고인성섬유 복합모르타르 PC판넬을 활용한 철근콘크리트 골조의 리모델링을 위한 보강시스템 개발," 한국콘크리트 학회 학술발표논문집, 18권, 1호, 2006, pp. 66-69   과학기술학회마을
16 Wu, K., Chen, B., and Yao, W. "Study on the AE Characteristics of Fracture Process of Mortar, Concrete and Steel-fiber-reinforced Concrete Beams," Cement and Concrete Research, Vol. 30, 2000, pp. 1495-1500   DOI   ScienceOn