• 한국군사과학기술학회지
• /
• 제1권1호
• /
• pp.114-127
• /
• 1998

A user friendly computer code(EMCOMST; Electro-Magnetic response for COMposite STructures) was developed which provides with computations of the response characteristics such as reflectance and transmittance to the incident wave angles, frequencies, composite thicknesses, ply orientations, and types of backplate as the linearly polarized transverse electro-magnetic wave is emitted to the advanced composite structures. In this investigation were reviewed the electromagnetic characteristics of the continuous orthotropic fiber-reinforced organic matrix composites with or without ferrite fillers, which are actively applied to low-weight and high-strength aircraft structures. Also were calculated the response of the three layered compound structures which have appropriately stacked above-mentioned materials as transmitting layer, absorbing layer, reflection layer, respectively under the specific thickness constraints for mechanical strength design requirements. For the composite structures presented in this study, minimum reflectance value less than -5㏈ can be obtained in the frequency range of 4 to 12 ㎓. In addition, analysis of structures attached isotropic radar absorbing materials(RAM) is facilitated by putting the material properties in the material input card entries adequately.

• Journal of Magnetics
• /
• 제19권3호
• /
• pp.291-294
• /
• 2014

In this paper, we examine the electrical and magnetic properties of three different types of shield materials used for wireless power transfer systems: namely, FeSiAl-composite, NiZn-ferrite, and FeSi-amorphous types. The power transfer efficiency and resistance of an RX coil are measured, while varying the shield thickness. For all three types, a thicker shield provides better power transfer efficiency. Analysis of the measurements shows that the FeSiAl-composite type is suitable for systems with size limitation. In terms of magnetic properties, the FeSi-amorphous type shows the best features, and is suited to high power applications. This work can be used as a guideline to select suitable shielding material in various wireless power transfer systems.

• Composites Research
• /
• 제21권2호
• /
• pp.31-35
• /
• 2008

자성 금속 코팅을 위해 폴리스티렌 submicron 입자를 제조하였다. 니켈과 철 코팅을 위해 무전해 도금을 적용하였고 열처리를 통해 폴리스티렌을 탄화 시켜 중공형 구조를 형성하였다. 이러한 중공형 자성 입자는 가볍고 효율이 우수한 전자파 흡수체 제조에 적용될 수 있다. 코팅 층의 두께, 성분 및 표면 형상은 SEM/EDS/TEM 으로 관찰하였고, 중공 자성 입자의 전자파 특성 비교를 위해 고분자 복합재료를 제조하였다. 복합재료의 투자율 측정 결과, 중공형 철이 니켈에 비해 우수하였으며 바륨 페라이트 (Barium ferrite)와 같은 기존의 자성 재료보다 우수하였다.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.988-995
• /
• 2010

In this study the (Alnico, Sm-Co) bonded magnets were fabricated by mixing the Sm-Co added alnico alloy powders with epoxy resin and binder, appropriately. Also, the hybrid ring magnets of (Alnico, Sm-Co)/Sr-ferrite were fabricated by coupling the Sr-ferrite composite layer with an (Alnico, Sm-Co) magnet. The magnetic properties of (Alnico, Sm-Co) ring magnets were varied with the amount of Sm-Co powders. The addition of Sm-Co powders increased a remanent induction($B_r$) and coercive force($_BH_C$), while decreasing a surface flux density and repulsive distance. The surface flux density and repulsive distance for the (Alnico, Sm-Co) ring magnet increased with a magnetizing voltage up to about 160 V and reached an apparent saturation point. Also, the measurements of temperature and moisture characteristics showed that the surface flux densities of N-S poles and repulsive distance decreased a little within 4% after 10 days passed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.97-101
• /
• 2003

우수한 휴대폰용 전파흡수체를 개발하기 위해 실리콘을 지지재로 한 Mn-Zn 페라이트를 개발하여 전파흡수능을 조사하였다. 본 연구에서는 시편의 제작온도가 전파흡수능에 미치는 영향을 연구하였으며 온도가 증가함에 따라 tan $\delta$ > 1을 나타내는 주파수가 저주파로 이동하는 경향을 나타내었고 이로 인해 70 $^{\circ}C$에서 제작한 1 mm 두께의 전파흡수체가 휴대전화의 중심사용 주파수인 1.8 GHz 부근에서 3.4 ㏈인 우수한 흡수능을 나타내었다.

• 한국통신학회논문지
• /
• 제17권6호
• /
• pp.580-588
• /
• 1992

비행물체에 대한 레이다의 추적 및 탐색거리를 축소시키는 전자방어책의 일환으로 물리적, 기계적 특성이 우수한 전자파 흡수층을 제작하기 위해서 플라즈마 용사방삭을 이용하였다. 이 코팅층은 종래의 M/W흡수층 제작에 사용하던 도전재료인 탄소대신에 탄화규소를, 자성손실재료로는 Ni-Zn ferrite를, 그리고 보지재를 사용하는 대신에 이들 재료분말을 기계적으로 혼합하여 플라즈마 용사코팅으로 모재 표면에 직접 흡수층이 형성되도록 했다. X-band(8~13 GHz)레이다용 탄화규소-페리이트 전자파 흡수체를 실험적으로 설계하고 시험제작하여 전기적 특성을 평가한 결과, -6dB(M/W 에너지 흡수율 75%)의 반사량을 허용한도로 했을경우 약 7.6~8.4%의 대역폭이 얻어졌으며, 최대 흡수두께가 0.5~0.55mm로 매우 양호한 박층형 전자파 흡수체가 얻어졌다.

• 한국자기학회지
• /
• 제9권1호
• /
• pp.35-40
• /
• 1999

M-type Ba 페리이트를 Ba 대신 Sr으로 치환시킨 페라이트 분말과 Fe대신 Co-Ti으로 치환시킨 육방 페라이트 분말을 각각 citrate sol-gel법과 2 MOE sol-gel법으로 합성하였다. 이들 분말들을 소결 처리 후 수소 분위기 하에서 온도를 변화시키면서 환원처리 하였다. X-선 회절을 이용한 결정구조 해석에서 105$0^{\circ}C$에서 소결 처리된 분말의 경우 단일상의 M-type 육방정 구조로 나타났다. X-선 회절실험 결과 Sr0.5Ba0.5Fe12O19과 다르게, Co-Ti 치환형 페라이트인 Sr0.7Ba0.3Fe10CoTiO19에서는 Co-Ti 치환이 환원과정을 저지시키는 효과가 있는 것으로 나타났다. 육방 페라이트에서 수소환원에 의한 포화자화 Ms값의 증가 원인을 알아보기 위하여 Mossbauer 분광실험을 실시하였다. Mossbauer 실험결과는 대부분의 $\alpha$-Fe가 4fvi자리와 12k자리로부터 발생되는 것으로 나타났으며, 이 $\alpha$-Fe 형성에 의한 Fe3+이온의 결함이 자기 상호작용의 붕괴를 가져와서, 자기이방성의 변화를 초래하고 또한 Ms값의 증가를 가져오는 것으로 추측된다.

• 한국세라믹학회지
• /
• 제53권5호
• /
• pp.489-493
• /
• 2016

Scandia ($Sc2O_3$)-stabilized zirconia (ScSZ) electrolyte-supported symmetrical solid oxide electrolyzer cells (SOECs), in which lanthanum strontium cobalt ferrite (LSCF)-gadolinia ($Gd_2O_3$)-doped ceria (GDC) composite materials are used as both the cathode and anode, were fabricated and their high temperature steam electrolysis (HTSE) performance was investigated. Current density-voltage curves were obtained for cells operated in 10% $H_2O$/90% Ar at 750, 800, and $850^{\circ}C$. It was possible to determine the ohmic, cathodic, and anodic contributions to the total overpotential using the three-electrode technique. The HTSE performance was significantly improved in the symmetrical cell with LSCF-GDC electrodes compared to the cell consisting of an Ni-YSZ cathode and LSCF-GDC anode. It was found that the overpotential due to the LSCF-GDC cathode largely decreased and, at a given current density, the total cell voltage decreased, which resulted in the enhanced hydrogen production rate in the symmetrical cell.

• 한국세라믹학회지
• /
• 제16권1호
• /
• pp.26-30
• /
• 1979

The microstructures and memory core characteristics of substituted lithium ferrites with addition of $Bi_2O_3$, $V_2O_5$, $Nb_2O_3$, and $P_2O_5$ were investigated. The effects of composite flux on the sintering of the substituted lithium ferrites were also studied. The results show that the addition of $Bi_2O_3$, $V_2O_5$, and $Nb_2O_5$ enhances sintering whereas $Sb_2O_3$ and $P_2O_5$ inhibits it, and that the addition of $Nb_2O_5$ results in uniform grain size while the addition of $Bi_2O_3$ or $V_2O_5$ results in non-uniformity in grain size. When $P_2O_5$ was added with $V_2O_5$ or $Bi_2O_3$, however, it results in uniform grain size and improved memory core properties.

• 대한의용생체공학회:의공학회지
• /
• 제28권1호
• /
• pp.102-107
• /
• 2007

In molecular imaging studies via magnetic resonance imaging, in vivo cell tracking is an important issue for the observation of cell therapy or disease behavior. High resolution imaging and longitudinal study are necessary to track the cell movement. Since the field inhomogeneity extends over several voxels, we have performed the numerical analysis using the sub-voxel method dividing a voxel of MR image into several elements and the information about the field inhomogeneity distribution around the micro-beads. We imbedded ferrite-composite micro-beads with the size of $20-150{\mu}m$ in the subject substituted for cells to induce local field distortion. In the phantom imaging with the isotropic voxel size of $200{\mu}m^3$, we could confirm the feasibility of sub-voxel tracking in a 3.0 T MRI.