• Journal of Hydrogen and New Energy
• /
• v.23 no.4
• /
• pp.397-403
• /
• 2012

Galactose, an isomer of glucose with an opposite hydroxyl group at the 4-carbon, is a major fermentable sugar in various promising feedstock for hydrogen production including red algal biomass. In this study, hydrogen production characteristics of galactose-glucose mixture were investigated using batch fermentation experiments with heat-treated digester sludge as inoclua. Galactose showed a hydogen yield compatible with glucose. However, more complicated metabolic steps for galactose utilization caused a slower hydrogen production rate. The existence of glucose aggravated the hydrogen production rate, which would result from the regulation of galactose-utilizing enzymes by glucose. Hydrogen produciton rate at galactose to glucose ratio of 8:2 or 6:4 was 67% of the production rate for galactose and 33% for glucose, which could need approximately 1.5 and 3 times longer hydraulic retention time than galacgtose only condition and glucose only condition, respectively, in continuous fermentation. Hydrogen production rate, Hydrogen yield, and organic acid production at galactose to glucose ratio of 8:2 or 6:4 were 0.14 mL H2/mL/hr, 0.78 mol $H_2$/mol sugar, and 11.89 g COD/L, respectively. Galactose-rich biomass could be usable for hydogen fermenation, however, the fermentation time should be allowed enough.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.6
• /
• pp.1021-1027
• /
• 1997

$CO_2$production in fermentation of dongchimi was measured and interrelated with changes in pH and titratable acidity. The effects of salt content and temperature on $CO_2$production rate were analysed. Fermentation of dongchimi showed drastic pH decrease in early stage and subsequent levelling off around 3.9, with linearly increased acidity up to 0.3~0.4% optimum quality. $CO_2$production of dongchimi could be analysed to consist of two consecutive stages of constant rate. The first stage $CO_2$production of higher rate moved to the second stage of lower rate when acidity rose beyond 0.3%. When compared to those of 1 and 2% salt content, dongchimi of 3% salt showed lower $CO_2$production rate in the 1st stage and slower acidity change through the whole fermentation period. However, it resulted in the product of highest $CO_2$accumulation at optimal ripeness because of consistent $CO_2$production of longer 1st stage period and relatively high $CO_2$production rate in 2nd stage. $CO_2$production depended on temperature less compared to acidity change(activation energy: 57.3 and 44.3kJ/mol for $CO_2$production of 1st and 2nd stages, respectively; 79.3kJ/mol for acidity change), which means higher ratio of $CO_2$production rate relative to acidity increase at lower temperature. Slower increase in acidity at low temperature also was shown to extend the period of 1st stage $CO_2$production. Therefore, low temperature fermentation was effective in producing the high $CO_2$content dongchimi at adequate acidity, which is desirable organoleptically.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.6
• /
• pp.1059-1064
• /
• 1998

Fermented beverage using lactic acid bacteria isolated from kimchi was investigated. Lactic acid bacteria KL 1, KD 6, KL 4 strains from kimchi, or obtained Lactobacillus acidophilus, Lactobacillus plantarum, Leuconostoc mesenteroides with and without yeast(Saccharomyces cerevisiae) were inoculated in fruit vegetable juice for single and mixed culture fermentation. During the fermentation by bacterial strain and yeast for 1~3 days at 30oC, various fermentation behaviors were observed. The growth rate of mixed culture of KL 1 and yeast was higher than that of single culture by KL 1 alone during the fermentation. The amount of organic acid produced by the mixed culture fermentation of KL 1 and yeast was 0.82%(3 day) or 0.58%(1 day) and with the final pH of 3.3(3 day) or 4.2(1 day). These mixed culture systems of isolated strains or other bacterial strains had almost similar results of growth rate and acid production. Among several bacterial strains, KL 1 was suitable for the mixed culture fermentation with yeast in terms of desirable fermentation behavior and organoleptical quality. The selected strain, KL 1 was identified as Leuconostoc spp. through the series of tests on carbohydrate fermentation and biochemical characteristics.

• Microbiology and Biotechnology Letters
• /
• v.23 no.5
• /
• pp.624-631
• /
• 1995

The fermentation characteristics of Saccharomyces cerevisiae F38-1, a newly isolated thermotolerant yeast strain from a high temperature environment have been studied using a fermentation medium containing 20% glucose, 0.2% yeast extract, 0.2% polypeptone, 0.3% (NH$_{4}$)$_{2}$SO$_{4}$, 0.1% KH$_{2}$PO$_{4}$, and 0.2% MgSO$_{4}$ without shaking at 30$\circ$C to 43$\circ$C for 5 days. The fermentability was over 90% at 30$\circ$C, 88% at 37$\circ$C, 77% at 40$\circ$C and 30% at 43$\circ$C. A similar fermentation result was obtained at pH between 4 and 6 at 30$\circ$C and 40$\circ$C. Aeration stimulated the growth of the strain at the beginning of the fermentation, but it reduced alcohol production at the end of alcohol fermentation. Optimal glucose concentration was determined to be between 18 and 22% at 40$\circ$C as well as 30$\circ$C, but the growth was inhibited at the glucose concentration of over 30%. A fermentability of over 90% was observed at 40$\circ$C in 2 days when the medium was supplemented by 2% yeast extract. A higher inoculum size increased the initial fermentation rate, but not the fermentation. A fermentability of over 90% was achieved in 2 days at 40$\circ$C in a fermentor experiment using an optimized medium containing 20% glucose and 1% yeast extract.

• Microbiology and Biotechnology Letters
• /
• v.22 no.6
• /
• pp.565-570
• /
• 1994

The pullulan production and morphological change of Aureobasidium pullulans ATCC 9348 were investigated both in batch fermentation and in continuous fermentation. The best carbon source for pullulan production was sucrose among seven different carbon sources. The pullulan production of A. pullulans was increased with increasing the carbon to nitrogen ratio of the medium using sucrose as a carbon source. In batch fermentation, production of pullullan occurred following exhaustion of the nitrogen source from the medium. The continuous fermentation showed that the pullulan production was closely parallelled with cell growth and was most effective at a dilution rate of 0.06~0.07 hr$^{-1}$-. The ratio of yeast-like cells(blastospores) of A. pullulans increased with the increase of growth rate, and reached 100% over the growth rate of 0.07 hr$^{-1}$. The growth rate, within a certain range, affected not only on the cell morphology, but on the specific pullulan productivity of A. pullulans.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1203-1208
• /
• 1998

To utilize astringent persimmon (Diospyros kaki, T.) effectively, response surface methodology (RSM) was applied to optimize and monitor the vinegar fermentation conditions by two stage fermentation. In the first stage, the fermentation conditions for maximum alcohol content was $20.51\;^{\circ}brix$ in sugar concentration of astringent persimmon, 139.52 rpm in agitation rate, and 94.88 hr in fermentation time. When sugar concentration of astringent persimmon was $14\;^{\circ}brix$, maximum alcohol content predicted by response surface methodology was 7.1% at agitation rate of 40 rpm and fermentation time of 120 hr. In the second stage, the fermentation conditions for maximum acidity was 224.40 rpm in agitation rate, 176.07 hr in fermentation time. Alcohol content and acidity predicted at the optimum conditions were similar to experimental values.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.460-465
• /
• 2001

To prepare vinegar using concentration apple juice, response surface methodology (RSM) was applied to optimize and monitor the vinegar fermentation properties by two stage fermentation. In the first stage, the optimum conditions for maximum alcohol contents were 18.56。Brix of initial sugar concentration, 61.96 rpm of agitation rate and 67.32 hr of fermentation time. The optimum condition for maximum acidity in the second stage (vinegar fermentation) were 201.53 rpm of agitation rate and 179.42 hr of fermentation time. Malic acid content was the highest and its content little changed during acetic acid fermentation. Lactic acid content increased a little during alcohol fermentation. Acetic acid content apparently increased during acetic acid fermentation.

• Journal of the Korean Professional Engineers Association
• /
• v.21 no.2
• /
• pp.13-18
• /
• 1988

A Study for ethanol fermentation with immobilized yeast that is entrapped to Ca-alginate beads and batch system was carried out using molasses as substrate. The results are as follows. 1. The yield of alcohol fermentation is more efficacious then that of conventional fermentation process. The beads were used 15times and got a result of fermentation yield rate 89. 57％∼92.35％f, which is comparable with the rate of 86.3％ gained from the conventional fermentation process. 2. The concentration of Ca-alginate was 1∼5％ For long run use (2520 hours) it is necessary 2％ or more concentration of Ca-alginate. 3. The amount of the yeast cells for entrap to Ca-alginate beads was required 1.0g (indried material) or more for 200g Ca-alginate beads.

• Microbiology and Biotechnology Letters
• /
• v.23 no.6
• /
• pp.723-729
• /
• 1995

A flocculating sugar tolerant yeast strain was isolated from fermenting Takju. This strain was identified as Saccharomyces cerevisiae CA-1 according to the Lodder's yeast taxonomic studies. The isolated yeast could grow in 50% glucose and in 7% ethanol in the YPD medium. It's optimal growth temperature, initial pH, shaking rate and initial glucose concentration for ethanol fermentation showed 35$\circ$C, 4.5, 150 rpm, 15%, respectively. Ethanol concentration was 63 g/l in 20% glucose after 24 hours, fermentation yield was 0.49 g-ethanol/g-glucose in 10% glucose after 24 hours and ethanol productivity was 3.09 g/l$\cdot $h in 10% glucose after 12 hours in batch fermentation. Repeated batch fermentation was possible for over 50 days and ethanol yield, ethanol productivity and substrate conversion rate were 0.39-0.50 g/g, 1.63-2.08 g/l$\cdot $h and more than 99%, respectively during these periods.

• Applied Biological Chemistry
• /
• v.34 no.3
• /
• pp.295-297
• /
• 1991

Effect of salt concentration of brined Chinese cabbage on the Kimchi fermentation was investigated. The salt concentration range was 1-5% and chemical characteristics of pH, acidity and ascorbic acid were measured during fermentation at $25^{\circ}C$. Fermentation rate was also calculated from the $CO_2$ production. It was found that the higher salt concentration caused a significant decrease in the maximum value of fermentation rate and pH reduction. Ascorbic acid content was rapidly decreased initially, followed by increase to maximum and slowely decreased thereafter. This change was more apparent at higher salt concentration.