• 제목/요약/키워드: Feedrate control

검색결과 76건 처리시간 0.031초

연삭가공에 있어 비가공 시간 단축에 관한 연구(I) -음향센서를 이용한 공연삭 시간의 단축- (Reducing the Non Grinding Time in Grinding Operations(1st Report) -Reducing the Air Grinding time using Sound Sensor-)

  • 김선호;안중환
    • 한국정밀공학회지
    • /
    • 제14권5호
    • /
    • pp.85-91
    • /
    • 1997
  • Air grinding time in grinding process has a great effect on its efficiency due to low feedrate. This paper presents a reduction methos of air grinding time in cylindrical plunge grinding operation. Tje reduction of air grinding time is accomplished by finding the distance between contact point and rising point of ultra- sonic signal of the grinding wheel to workpiece. It uses a variation of sound signal generated by the flow of coolant when the grinding wheel approaches to workpiece. The ultrasonic sensor with 23 kHz center fre- quency and 8 kHz bandwidth is used to find the nearest approaching point(NAP). Monitoring and control system of the grinding conditions is implemented with CNC controller to control feedrate override and ultrasonic sensor to find NAP. The experimental result shows that the ultrasonic signal is a good measure- ment to find NAP. But it needs the considerations for the effect of the relationship between flowrate of coolant and diameter of workpiece.

  • PDF

NC 선반공정에서 주축 전류 모니터링을 통한 구속적응제어 시스템 (Adaptive Control Constraint System through Current Monitoring of Spindle in NC Lathe Process)

  • 신동수
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
    • /
    • pp.27-33
    • /
    • 1999
  • In order to regulate cutting force at a desired level during NC lathe process, a feedrate override Adaptive Control Constraint system was developed. Nonlinear model of the cutting process was linearized as an adaptive model with a time varing process parameter. Performance of the ACC system was confirmed on the NC lathe equipped with the developed NC system through a large amount of experiment.

  • PDF

KIMMBOT II 제어기의 재구성 (A Newly Developed KIMMBOT II Controller)

  • 여인택;김선일
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
    • /
    • pp.986-989
    • /
    • 1988
  • The new controller which conststs of IBM-PC/AT, SBC, servo module and motor driver has been developed for KIMMBOT II robot. The servo module which controls two axes at the same time also has beendeveloped. This module inputs relative number of pulse and feedrate via multbus, after then outputs analog command voltage with reference to feedback pulses from the encoder of a motor. This system has a great flexibility. The reduction of parts gives more reliability.

  • PDF

2축 디지틀 윤곽제어 (Digital Contouring Control of Biaxial System)

  • 이건복;고태근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
    • /
    • pp.435-437
    • /
    • 1998
  • In this productive system, it needs to control the each axis motion harmoniously to perform accurately for the manufacturing, transporting and printing. Independent Axis Control usually used for this objection. However, if Independent Axis Control mismatched the parameter of each axis system or in the case of free curve tracking or the case of high speed control, there would be big contour error so that cannot achieve control objection. As a result, there is Contour Control method suggested to supply for this defect. This paper carried modeling of biaxial system and implemented Independent Axis Control & Contouring Control on straight line, circular, and coner path by simulation and experiment. If feedrate increased, contour error growed. In consequence, according to this factor, we introduced contouring controller, so we could find the fact that contour error was reduced more than that of independent axis control about each path.

  • PDF

직선도 개선을 위한 엔드밀링머시인 의 적응제어 (Adaptive Control of End Milling Machine to Improve Machining Straightness)

  • 김종선;정성종;이종원
    • 대한기계학회논문집
    • /
    • 제9권5호
    • /
    • pp.590-597
    • /
    • 1985
  • 본 논문에서는 위치오차는 가공전 밀링베드를 수치제어 장치를 이용하여 가공 면에 수직한 방향으로 움직여 수치제어 장치인 스텝모우터의 분해능 한계 내에서 보정 하고 또한 공구휨에 상당하는 만큼 이 송속도를 더함으로써 제어하며, 파형오차는 이 송속도와 공구처짐 사이의 관계를 수정된 Taylor의 공구식으로 모형화하고 절삭공정중 이송속도를 적절히 조절하여 공구의 휨양을 제어함으로써 스텝모우터를 갖는 밀링머시 인에서 길이 508mm,두께 20mm의 두꺼운 철판을 평면절삭하는 경우 직진도오차를 최소 로 하는 GAC 방법을 개발하였다.측정은 밀링머시인 자체의 구조적, 동적변화나 절삭 조건의 변화, 공구의 재질 및 마멸상태의 변화, 공작물의 재질 변화등에 적응할 수 있 도록 Fig. 2에 보인 바와 같이 등간격으로 배열된 100개의 위치에서 가공후(post-pro- cess)측정을 통하여 취하였고, 절삭계수의 추정은 측정점을 각각 10개씩 10개의 구간 으로 묶어 각 구간에서의 계의 특성이 변하지 않는다는 가정하에서 계수를 지수가중 반복최소 자승(exponentially weighted recursive least squares, EWRLS)법을 이용하 여 추정하였고, 실제 절삭작업중 모델의 계수변화에 대한 사전 지식이 없이도 이들 계 수들을 보정시킴으로써 최적의 직진도를 얻을 수 있는 절삭조건을 제시하였다. 그리 고 이 방법의 도입으로 단일(SINGLE-PASS)밀링작업이 가능함을 보였고 또한 방법의 타 당성을 증명하기 위하여 여러 경우의 절삭상태에서 실험을 수행하였다.

다구찌방법을 이용한 다축 동시 PID 제어시스템의 제어이득 조정 (Control Gain Tuning of a Simultaneous Multi-Axis PID Control System by Taguchi Method)

  • 이기하;김종원
    • 한국정밀공학회지
    • /
    • 제16권6호
    • /
    • pp.25-35
    • /
    • 1999
  • This paper presents a control gain tuning scheme for multi-axis PID control systems by Taguchi method. As an experimental set-up, a parallel mechanism machine tool has been selected. This machine has eight servodrives and each servodrive has four control gains, respectively. Therefore, total 32 control gains have to be tuned. Through a series of design of experiments, an optimal and robust set of PID control gains is tuned. The index of the sum of position error and velocity error is reduced to 61.4% after the experimental gain tuning regardless of the feedrate variation.

  • PDF

견실한 적응 제어기를 이용한 절삭력 제어 (Cutting Force Control by Using an Adaptive Robust Controller)

  • Kim, J.W.;Kim, T.Y.
    • 한국정밀공학회지
    • /
    • 제12권4호
    • /
    • pp.55-66
    • /
    • 1995
  • This paper presents an explicit pole-assignment adaptive servocontrol shceme and its application to cutting force regulation for feedrate maximization. The controller structure of the suggested adaptive control scheme is based on robust control theory. This controller structure is then combined with an on-line model estimation algorithm. The whole scheme is applied to a milling process control. The results of real time cutting experimental studies show that the asymptotic regulation of milling peak cutting forces can be achieved with robust- ness against the time varying perturbations to the process model parameters, which are caused by nonlinear cutting dynamics.

  • PDF

모션 제어장치의 네트워크 보간 운전방법 (Operating Method of Network Interpolation for Motion Control Device)

  • 곽군평
    • 제어로봇시스템학회논문지
    • /
    • 제8권8호
    • /
    • pp.713-718
    • /
    • 2002
  • Motion controllers are essential components for operating industrial equipments. Compared with general industrial controllers, motion controllers allow motion control requiring greater speed and precision. This paper presents a method for controlling multi-axes motors via industrial networks. To achieve a line or arc interpolation, the master system delivers instructions to slave systems connected to the network. The network instruction transmitted from the master controller is re-interpolated by the individual slaves through sub-interpolators. The re-interpolated feedrate information is transmitted to the motion control loop in which the current position and the reference position are then calculated. In this way, the interpolation driving between control units is achieved via industrial networks.

볼엔드밀 절삭공정에서 위치 및 절삭력 동시제어 (simultaneous Control of Position and Cutting Force Based o Multi-input Multi-output Model in Ball End Milling Process)

  • 이건복
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
    • /
    • pp.121-126
    • /
    • 2000
  • This research proposes a new advanced control method and demonstrates its realization in part. By incorporating shape machining and cutting force control at a time, this integrated scheme makes it possible to machine a desired shape and avoid the trouble of programming feedrate and spindle speed before machining and also reduce the shape error. The main idea proposed to achieve those goals consists in giving commanded path and desired cutting force at the same time. which makes it possible for position and force controller to distribute the corresponding velocity of individual axes and main spindle by an appropriate interpolation. That indicates we can replace the built-in interpolator of commercial machine tools by the developed algorithm.

  • PDF

선삭가공에서 절삭력을 일정하게 유지하기 위한 적응제어 (Adaptive Control for Cutting Force Regulating in Turning Operation)

  • 노상현;김진락;김교형
    • 대한기계학회논문집
    • /
    • 제17권1호
    • /
    • pp.69-77
    • /
    • 1993
  • 본 연구에서는 Koren과 Masory가 개발하여 적분제어기에 적용한 제어알고리즘 을, 제어기 반응속도를 향상시키기 위하여 비례적분제어기에 적용하는 방법을 제시하 고자 한다. 실험을 통하여 제어시스템을 모델링하고, 근궤적법을 이용하여 시스템을 안정하게 유지하기 위한 개회로 이득을 선정하며, 기존의 보통선반을 적응제어시스템 으로 개발하여 고정이득 비례적분제어기와 가변이득 비례적분제어기의 성능을 실험을 통하여 비교하고자 한다.