In the recent years, development of machine tool with high speed feeding system have brought a rapid increase in productivity. Practically, thermal deformation problem due to high speed is, however, become a large obstacle to realize high precision machining. In this study, therefore, the construction of automatic error compensation system to control thermal deformation in high speed feeding system with real time is proposed. To attain this purpose, high speed feeding system with feeding speed 60mm/min is developed and experimental equation for relationship between thermal deformation and temperature of ball screw shaft using multiple regression analysis is established. Furthermore, in order to analyze thermal deformation error, compensation coefficient is determined and thermal deformation experiments is carried out. From obtained results, it is confirmed that automatic error compensation system constructed in this study is able to control thermal deformation error within $15{\sim}20{\mu}m$.
Single-jet 반회분식 결정화 반응기에서 동력투입량, 반응물의 주입시간 및 주입방법등 반응조건의 변화가 란타늄 옥살레이트 결정입자의 반응성 결정화에 미치는 영향에 대해 실험적으로 조사하였다. 란타늄 옥살레이트 결정입자의 크기분포는 반응조건에 관계없이 monomodal 형태의 크기분포를 나타내었으나 평균결정크기는 반응조건에 크게 영향을 받았다. 동력투입량이 증가할수록, 반응물의 주입속도가 빠를수록, 란타늄 옥살레이트의 결정입자크기는 감소하였으나 상대적 유도시간은 증가하였다. 반응물의 주입방법에 있어서 옥살산 용액이 주입되는 경우보다 염화란타늄 용액이 주입되는 경우에 결정입자는 크게 나타났으며 상대적 유도시간은 감소하였다. 그리고 결정입자의 형태는 모두 침상형으로 반응조건의 변화에 크게 영향을 받지 않았다.
Heat stress is known to affect physiological systems in goats. This study investigated changes in nutrient digestibility, behavior and growth hormone secretion among goats in a hot environment (H; 35${\pm}$ 1.2$^{\circ}C$, [RH] 80${\pm}$7.2%, 13 d), and in a thermoneutral environment (T; 20${\pm}$0.6$^{\circ}C$, [RH] 80${\pm}$3.4%, 20 d), and accompanied by the same restricted diet as provided in the hot environment. The following results were obtained: rectal temperature and water intake were higher in the H treatment than in the T treatment or TR treatment, while hay consumption was lower. CP, NDF and ADF digestibility was highest in H treatment. Time spent eating in the H treatment was also the highest, followed in order by T treatment and TR treatment. Ruminating time was lower in H treatment than in T treatment or TR treatment, and reposing time was highest in the TR treatment. Growth hormone concentrations in T increased 4.5 h after feeding. In H, growth hormone concentrations increased 0.5 h after feeding. However, growth hormone concentrations were not changed following TR feeding. In conclusion, heat exposure in goats decreased feed intake, but increased digestibility. However, when goats in a thermoneutral environment received the same restricted feeding as they received in the hot environment, digestibility increased. Between the H treatment and TR treatment, the changes in digestibility were accomplished by coordinate changes in hormone secretion in order to maintain body homeostasis. To maintain energy balance under a hot temperature or a restricted feeding condition, goats may control their metabolism by changing growth hormone release.
Protein-calories malnutrition is common among patients in the hospital. In particular, elderly patients with neurologic disorders has more risk of nutritional deficiency due to swallowing difficulty. Enteral tube feeding is more economical, physiological and immunological than parenteral nutrition for patients who have adequate gastrointestinal function. This study was conducted patients with neurologic disorders who received enteral nutrition at Asan Medical Center from February 1 to October 10, 2002. The control group (48 patients) were given traditional feeding methods 4 times a day while the treatment group (45 patients) were given improved feeding methods 3 times a day. We assessed nutritional status of patients and compared to both groups. We investigated body weight, serum albumin, hemoglobin, total lymphocyte count by means of nutrition markers. The objectives of this study is to reduce the time needed for nutritional requirement of patients without an increase in gastrointestinal intolerances. The results of this study are as follows: 1. Nutritional status of many patients in both groups were either malnourished or at risk for malnutrition. 2. The time to arrive to the nutritional requirements were 6.21 $\pm$ 0.35 days for the control group and 4.24 $\pm$ 0.52 days for the treatment group. The treatment group showed a significantly shorter amount of time. 3. The changes of the nutritional marker in the control group showed a significant drop in body weight, serum albumin and serum hemoglobin while the treatment group experienced a significant increase in body weight, serum albumin and total lymphocyte count. 4. Feeding intolerane such as diarrhea, high residual volume, ileus, nausea and vomiting were investigated. Diarrhea found in 25.1% (12 patients) of the control group and 22.2% (10 patients) of the treatment group and these findings are not significant.
International Journal of Naval Architecture and Ocean Engineering
/
제11권1호
/
pp.462-473
/
2019
The effects of the location and dimension of the gate, location, and volume of the feeder, application of a chill, chill volume, and heating method of the feeder with respect to the effect of the mold-designing technologies on the defect status of the products are described. It is possible to increase the solidification time of the feeder by heating feeder. Furthermore, the pressure generated from the feeder is imposed on a product, and this decreases the generation of shrinkage porosities. In this study, two types of gating and feeding systems had been proposed: the bottom L-type junctions and the top L-type junctions. Additionally, solidification behaviors, such as solidification time, shrinkage porosities, weight percentage of chill system to product, hot spot, and solidification time ratio (=Solidification time of feeder/solidification time of product), are extensively analyzed by using commercial casting simulation software. Based on the solidification behaviors, reasonable mold design, feeding system, critical feeder heating temperature, and solidification time ratios are proposed in the sand casting process for the fabrication of carrier housing in order to reduce the casting defects and to increase the recovery rate.
A survey of infant practices was conducted to provide information on which to base planned nursing interventions. The subjects were a convenience sample of 168 mothers visiting out - patients departments of five general hospitals and one public health center in Seoul for immunizations or treatment for common colds for their infants from two to 12 months of age. Data collection was carried out from July 8th to September 30th, 1991 using a questionnaire of 84 questions, 31 on the type of feeding, 22 on supplementary feeding and 21 on demographic infer mation. The results are summarized as follows : 1) The type of feeding was primarily artificial feed-ing (63.1%), followed by mixed feeding (22%) and breast feeding (14.9%) of the 59 mothers expecting during pregnancy to breast feed, 54. 2% changed artificial feeding and 30.5% went on to breast feed as they had expected. For mothers expecting to continue breast feeding over seven months. only one infant was being breast fed for over seven months. 2) For the 106 mothers using artificial feeding, 70. 8% hed attempted breast feeding, 64% of them for less than a month. Breast milk had been suppressed by for medication (38.7%) : 34.9% had used no specia] means. 3) The major reasons for replacing breast feeding with artificial feeding were the infants' demand for more milk (47.2% ) and insufficient supply of breast milk (49.3%). 4) Most mixed feeding was started at the age of one to three months (59.5%). Only 34.4% gave an artificial feeding after breast feeding : most (46%) alternated breast feeding with artificial feeding. On the whole, the motive for mixed feeding was the lack of breast milk (70.3%). 5) Many mothers (81.8%) were adding vitamin or mineral supplements to artificial milk and 51.5% were adding something to faciliate digestion. As for the method of sterilizing milk bottles and nipples, 56% had sterilized them together in boiling water from the beginning : 27% were just washing the bottles after boiling only once initially when measuring artificial milk powder, 31. 5% of the mothers over filled the measuring spoon rather than to the level. 6) The mother's occupation was related to her way of feeding. Mothers at home full time did more breast feeding than mothers employed outside the home. (x²=5.72, p=〈0.05). 7) Most mothers began supplementary food, from three to four months (48.8%) : 11.2% began later than seven months. Supplementary food was given between milk feedings by 67.2% of the mothers : 19.2% gave it before a milk feeding. Some mothers(26.4%) made their own supplementary food : 19.2% used ready - made supplementary food products for convenience. Recommendations for nursing interventions included : 1. Prenatal education about the advantages of breast feeding and breast care, and home visits after delivery for counselling related to breast feeding. Correct preparation of artificial feeding methods need to be taught in both pre & postnatal periods. In addition, specific education about supplementary feeding needed. 2. Further research is indicated about the Perceived lack of supply of breast milk and about the effectiveness of nursing interventions to Promote breast feeding.
The objective was to evaluate method of feeding (free access or intubation), method of slaughter (carbon dioxide gas or barbiturate) and digesta flushing medium (distilled water or physiological saline), in the development of an ileal amino acid digestibility assay for 4 week-old broiler chickens. Three diets were used (commercial (C), semi-synthetic meat-and bone meal (MBM) or wheat (W)). For the coarser C and W diets but not for the MBM diet, feeding method had a significant effect on concentrations of chromium (Cr), nitrogen (N), acid detergent fibre (ADF) and neutral detergent fibre (NDF) in the crop contents at a set time after a meal. There appeared to be a selection of food particles under free-access feeding. For birds receiving the wheat diet there was an effect (p < 0.05) of sampling time after feeding on the concentrations of Cr, N, ADF and NDF/Cr in the crop contents. Flushing ileal digesta with distilled water or saline led to similar apparent ileal N digestibility coefficients. Birds given the MBM diet, and killed by inhalation of $CO_2$, had significantly (p < 0.05) lower apparent ileal N digestibility coefficients (73 versus 80%) than those killed by barbiturate overdose.
This study was performed to investigate the effect on polyunsaturate fatty acid diets and feeding periods on the antithrombosis. the hematological changes in the blood and fatty acid compositions of platelets in rats. Each group of rats was fed a diet containing 20%(W/W) corn oil beef tallow sardine oil and the general stock diet for 10, 20. 40 and 80 days. Rats fed sardine oil diet showed significantly longer bleeding time than any other diet groups after 20 days feeding The whole blood clotting time of sardine oil group fed for 80 days was increased significantly. The number of platelet and the concentration of hemoglobin showed no significant difference among all groups. The number of white blood cell was decreased continously in sardine oil group after 10 days feeding. The level of malondialdehyde generation during thrombin-induced aggregation of platelets was decreased continously in sardine oil grou after 20 days feeding. With regard to the composition of platelet fatty acid the ratio of eicosapentaenoic acid(EPA 20: 5 $\omega$-3) to arachidonic acid(AA 20:4 $\omega$-6) was increased in sardine oil group but decreased in corn oil groups and beef tallow groups with days. In conclusion the rats fed sardine oil diet for more than 20 days showed the fact that EPA induced the antithrombosis. the changes in number of white blood cell and the fatty acid composition of platelets.
To examine factors affecting feeding efficiency of grey herons (Ardea cinerea), the foraging behavior was studied at a reservoir in Asan city, Chungcheongnam-do, South Korea during the breeding seasons (from April to July) of 2006 and 2007. Four factors (age of foraging birds, time of day, breeding stage, and microhabitat type) were analyzed. Adults were more efficient foragers than recently fledged juveniles, and they had a higher success rate than juveniles. About half of the adults caught large prey, whereas most juveniles caught only small prey. Adult grey herons had different feeding efficiency according to the breeding stage. Pecking and capture rates were high during the late period (fledging stage), and biomass intake rates were high during the early (incubating stage) and late periods. However, time of day had no significant effect on foraging activity of adult grey herons. Feeding activities of adult grey herons also showed significant variation among microhabitat types. Pecking and capture rates were higher in the submerged plants area, but capture success rate and biomass intake rate were not different according to microhabitat type.
본 연구는 사료 급여량 자동조절 및 사료의 허실을 최소화하며 구조가 간단한 육성비 육돈용 자동급이기 개발을 위해 수행하였다. 개발 시작형 자동급이기의 주요 구성은 사료저장조, 사료이송장치, 사료이송제어장치, 사료진타장치, 프로그램머블 IC, 개인용 컴퓨터로 구성되었다. 개발 시작형 자동급이기의 가루사료의 초당 평균 이송량은 $9.83{\pm}0.4\;g$, 이었다. 개발 시작형 자동급이기를 이용 체중 43 kg 내외 육성돈(렌드레이셔)을 공시 6주 동안 콘크리트 돈방에서 사양 시험을 실시하였다. 개발 시작형 자동급이기는 사료공급 시간을 2초, 3, 4, 5, 6초로 설정, 검증시험을 수행 하였다. 개발 시작형 자동급이기 일일 급이기 방문 빈도는 사료이송 구동시간에 관계없이 05~11시와 11시부터 17시 사이에 집중적 이었다. 사료허실을 줄이기 위하여 개발 시작형 자동급이기 사료이송 시간은 2~4초 이내가 적절한 것으로 나타났다. 개발 시작형 자동급이기의 사료이송 기준 6초를 제외하고, 개발 시작형 자동급이기가 관행 급이기보다 시험 전기간 평균 일당 종체량(0.8~0.9 kg)은 같거나 높고, 일일 사료섭취량과 (2.76~2.93 kg), 사료요구율 (3,10~3.66)은 같거나 낮은 것으로 나타났다. 이상 결과를 일당증체, 사료섭취량, 사료요구율, 사료 허실량 등을 종합 해보면 육성비육돈용으로 개발 시작형 자동급이기 이용이 가능할 것으로 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.