• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.5
• /
• pp.734-740
• /
• 2023

The effect of feeding frequency on growth performance, body nutrient composition, and hematological parameters of juvenile chum salmon Oncorhynchus keta was investigated. The juveniles (10.9±0.3 g) were fed commercial feed for 30 days with feeding frequencies of 1, 2, 3, 4, or 5 meal (s)/day (n=2 tanks per treatment) in a recirculating aquaculture system (RAS). Fish were fed to satiation at each of the feeding frequencies. At the end of the feeding trial, final body weight, weight gain, and specific growth rate of fish fed 2 meals/day were significantly higher than those of fish fed 1 meal/day(P<0.05); however, no difference was detected among the other feeding frequencies. Daily feed intake significantly increased with increasing feeding frequency, whereas feed and protein utilization efficiencies continuously decreased with increase in the feeding frequency. Among the treatments, fish fed 1 meal/day showed the lowest value in whole-body lipid content and total protein concentration in plasma. Taken together, the optimal feeding frequency for growth performance and feed utilization efficiency in chum salmon juveniles reared in the RAS was determined to be 2 meals/day.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.745-753
• /
• 2010

Many studies using RFID which can identify the movement of targeted objects has been conducted actively. In this paper, we propose improved tagging method to check exactly the amount of fish feed by the aquaculture tank in a land-based aquaculture farm and design the RFID feeding system to perform auto feeding history. Also, we implement the prototype system which it includes development program for auto-identification and auto-recording and self-made RFID feeding cart equipped the weight device, RFID reader, control module and display device.

• Korean Journal of Poultry Science
• /
• v.25 no.3
• /
• pp.137-145
• /
• 1998

This study was conducted to compare the meat characteristics Korean Native Commercial Chicken(KNCC) by feeding system Feeding system of T$_1$ and T$_2$were same types from hatch to 8 weeks, starter diets( 0~4 weeks, mash, ME 3,l00kcal, CP 22.94%), grower diets(4~8 weeks, crumble, ME 3,l00kcal, CP 19.31%). Nutrient contents of finisher diets of T$_1$(pellet, M.E 3, 200kcal, CP 20.44%) was higher than T$_2$(mash, ME 3,l00kcal, CP 14.88%). Breast and legs meat of KNCC were used to analyze chemical composition, physicochemical characteristics, textural traits and sensory evaluation test. Live weight(L.W) /abdominal fat accumulation(A.F.A) was significantly different(P<0.05), but live weight(L.W) /dressed weight(D.W), percentage of cutted meat, chemical composition(moisture, CF, EE, CA), meat color(CIE), physicochemical properties, sensory evaluation score were not significantly by feeding systerns, at 12 ar'd 16 weeks of age.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.5 s.182
• /
• pp.155-161
• /
• 2006

This paper introduces a new type of mechanical tape feeder for chip mounter. The mechanical feeder is composed of a pneumatic linear actuator and a linear feeding module with the application of a cam-slider. As semiconductor chips are getting smaller, PCB assembly makers require the feeder to position the chip with high accuracy. The linear feeding system improves the positioning accuracy of the chip by getting rid of the index error, which brings into existence on the sprocket rotating feeder. It also can make greatly reduce the dumping rate. The dumping error is caused by the impact occurred as the pawl to interrupt ratchet wheel rotation. The paper discusses its mechanism and mechanical performance. The positioning accuracy and the dynamic characteristic were measured for long time operation and analyzed. As a result, the feeder showed very good performance. However, the feeding system was dynamically unstable due to the cover film eliminator that is required to be modified

• Child Health Nursing Research
• /
• v.3 no.1
• /
• pp.52-61
• /
• 1997

This study was attempted to identify the knowledge to breast-feeding and the performance of nursing activities for breast-feeding and to test 'how does the degree of knowledge to breast-feeding influence the nursing activities for breast-feeding?' The subjects were 180 nurses working in delivery rooms, nursery, obstetrics & pediatrics wards or OPD of obstetrics & gynecology of 8 general hospitals in Pusan as of August 3 through 13, 1996. The results are abstracted as follows. 1) Subject nurses' age, 25-29 was 45.6%(the major), education levels graduates from junior college were 95.0%, unmarried status was 62.2%, 76.5% of married nurses had children, 39.7% in-service education for Breast-Feeding, 33.7% did nursing activities for breast-feeding actively, the reason for inadequate activities for breast-feeding was 'too much other tasks.' 2) The degree of knowledge to breast-feeding ; mean score was 13.54, the degree of performance of nursing activities for breast-feeding : 92.38±20.93 points out of possible 145 points (3.19±.74 out of possible 5 points) moaned that it was a low level. 3) The hypothesis 'the nurses who have higher degrees of knowledge to breast-feeding will show higher degrees of performance of nursing activities for breast-feeding than the nurses who have lower degrees of knowledge to breast-feeding' was tested by t-test(t=-.01, P=.9888), but rejected because it turned out statistically not significant at the level of P<.05. Above results suggested the degrees of knowledge to breast-feeding and the degrees of performance of nursing activities for breast-feeding were generally low and the degree of knowledge didn't influence the nursing activities. Researchers believe that the education for breast-feeding by the nurses need to be performed systemically & practically and new method of breast-feeding education program need to include hospital managers as well as nurses related mothers and their family. In audition, researchers propose the introduction of &lactation specialist system&, for the specialist can change the attitude of feeding-mothers positively with their specialty and authority.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.7
• /
• pp.573-577
• /
• 2002

A tape feeder of a SMD(Surface Mount Device) mounter is a device that sequentially feeds electronic components on a tape reel to the pick-up system of the mounter. As components are getting much smaller, feeding accuracy of a feeder becomes one of the most important factors for successful component pick-up. Therefore, it is critical to keep the feeding accuracy to a specified level in the assembly and production of tape feeders. This paper describes a tape feeder inspection system that was developed to automatically measure and inspect feeding accuracy using machine vision. It consists of a feeder base, an image acquisition system, and a personal computer. The image acquisition system is composed of CCD cameras with lens, LED illumination systems, and a frame grabber inside the PC. This system loads up to six feeders at a time and inspects them automatically and sequentially. The inspection software was implemented using Visual C++on Windows NT with easily usable GUI. Using this system, we can automatically measure and inspect the quality of all feeders in production process by analyzing the measurement results statistically.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.325-330
• /
• 2018

In this paper, we investigated the impedance method for searching fault detection point in case of an accident in the AC electric railway AT feeding system. For this purpose, simulation circuit modeling and prototype hardware are made based on the known numerical analysis. As a result of simulation modeling of the feeding system based on the numerical analysis of the impedance method confirmed that the modeling was properly implemented with an average error rate of 0.07%. Also, as a result of fault event by hardware simulator, it was confirmed that the breaker operation time is shortened and the fault current is decreased while the voltage is close to the supply voltage in the transient state as the point of the fault accident moves away from the substation(SS).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.167-170
• /
• 2015

In this paper, we propose the Micturition training and Automatic feeding system to enable busy modern people can grow pets more efficiently. This system will be able to operate a smart phone application with a Bluetooth, furthermore, by using the Wifi access the Internet from anywhere and to operate remotely. This system is divided micturition board feeding unit. micturition board consists of a water pressure sensor for detecting micturition and recorder module, speaker for voice output, feeding unit consists of two servo motor for auto feeding and Bluetooth sensor for remote control. Both micturition board and feeding unit produced Arduino board and C language-based Arduino sketch program, feeding unit was able to communicate with the library to support Bluetooth communication.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1997-2004
• /
• 2011

The $2{\times}25kv$ AT electric power feeding method in the A.C. electric train adopts the one-phase power feeding method as the standard due to a voltage phase difference, and the distance between the two neighboring substations is 50km due to voltage drop. The one-phase power feeding method makes the system operation feasible, while making it unfavorable for power supply. Moreover, railroad involves large-capacity single-phase load, and if it is expected to continue to rise, it is necessary to research on measures to stabilize the supply of power to railroad cars with the existing facilities. In this study, a parallel power feeding method between neighboring substations is proposed to stabilize the supply of electric power to electric railroad cars under the 2*25kv AT power feeding method and the loop current induced by voltage phase difference between the two neighboring substations during parallel power feeding is investigated.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1619-1621
• /
• 2005

AC electric railway feeding system classifies into three groups such as normal, TIE and PP feeding method. If the feeding scheme of ac electric railway is changed, current distribution flowing through the line is also modified. And if the current distribution is altered according to the feeding scheme, returned tendency through rail load current or fault current of the train is changed. So the investigation about error correcting method of protective relay is needed considering feeding scheme. In this paper prior to error correcting of protective relay, through interpreting feeding circuit, changes in current distribution of the rail in accordance with feeding would be predicted and analyzed.