• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.123.2-123
• /
• 2001

It is difficult to determine the feeding rate of coagulant in the water treatment plant, due to nonlinearity, multivariables and slow response characteristics, etc. To deal with this difficulty, the neuro-fuzzy system and the genetic-fuzzy system were used in determining the feeding rate of the coagulant. The fuzzy system is excellently robust in multi-variables and nonlinear problems. Therefore it uses basic algorithm, but it is difficult to construct of the fuzzy parameter such as the rule table and the membership function, Therefore we made the neuro-fuzzy system and the genetic-fuzzy system with the fusion of learning algorithms and compared the performance of the two fuzzy systems. To apply these algorithms, we made the rule table, membership function from the actual operation data of the water treatment plant. We determined optimized feeding rate of coagulant using the fuzzy operation, and also compared ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.98.4-98
• /
• 2001

A tape feeder of a SMD(Surface Mount Device) mounter is a device that sequentially feeds electronic components on a tape reel to the pick-up system of the mounter. As components are getting much smaller, feeding accuracy of a feeder becomes one of the most important factors for successful component pick-up. Therefore, it is critical to keep the feeding accuracy to a specified level in the assembly and production of tape feeders. This paper describes a tape feeder inspection system that was developed to automatically measure and inspect feeding accuracy using machine vision. It consists of a feeder base, an image acquisition system, and a personal computer. The image acquisition system is composed of CCD cameras with lens ...

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.236-241
• /
• 2007

DC feeding system is mainly floating but the rail potential and the leakage current are created because of long parallelism between rails and ground. Rail potential causes electric shock to human and leakage current causes electrolytic corrosion to nearby the buried metals. Therefore the design technologies to reduce, protect and monitor these effects are important recent DC feeding system. Normally during designing DC feeding system in terms of rail potential and leakage current, there are about 10 parameters. Four design parameters among those is analysed based on propagation theory that is utilized in order to simulate grounding system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.122-129
• /
• 1995

This is an experimental study on the chassis dynamometer and high way road testing during a severe winter and summer season. Results obtained to compare with the ultrasonic fuel feeding system and conventional fuel system in diesel automobile engine. The results were as followers in case of the ultrasonic fuel feeding system. 1. In chassis dynamometer testing during given vehicle speeds, output were increased from 4.6 to 11.43%, brake specific fuel consumption were increased from 6 to 19%, smoke were decreased from 16.7 to 50%. 2. The running fuel consumption ratio in high way road test were decreased by 15.3% at a severe summer and 20.2% at a severe winter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.680-685
• /
• 2011

Nowadays, in metropolitan railroad, DC feeding system is being generally applied. In order to reduce damages of electro-chemical corrosion caused by stray current and leakage current, in DC feeding system, rail is used as negative-polarity return conductor for traction load current. However, it has problem of rail potential increase and there are no adequate measures to prevent it in domestic. In this paper, we presented fundamental theory and related standards about rail potential increase. And then, we analyzed field testing data and simulated a variety of operations by using PSCAD/EMTDC as an analysis program of power system. In addition, voltage control device is suggested to prevent accidents caused by rail potential increase.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.3
• /
• pp.599-604
• /
• 2017

Nowadays reactance method is being used as a technique for fault location in parallel feeding AC traction power system. However, implementation of this method requires a large number of field tests(ground fault) which is a huge burden on the operators. This paper presents a new estimation technique using quadratic interpolation to reduce number of times for field test and improves the accuracy of fault location. To verify a new technique, we solve AT feeding circuit and model it using PSCAD/EMTDC. Finally this paper conducts a comparative analysis of usefulness between a new technique and real field data.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.1
• /
• pp.91-97
• /
• 1993

This experiment was carried out to examine the effects of urea-treated rice straw feeding on the growth performance of crossbred Holstein heifers under different feeding conditions. In the first experiment, the animals were given diets having 2 levels of TDN and CP and 3 levels of crude fiber (22, 30 and 36%) which were formulated with urea-treated rice straw and concentrates. Daily weight gain of heifers was not different between 22% and 30% CF diets, but the reduction of TDN or CP level to 90% of the requirements decreased the weight gain. Fiber content of 36% also reduced the body weight gain. The reduction of TDN significantly reduced DM intake and increased feed conversion ratio. Feed cost per kg weight gain was significantly increased by an increase in CF to 36%. In the second experiment, separate feeding and total mixing feeding were compared. There were no significant differences between the two feeding systems in body weight gain although the possibility of superiority in SF to TMF remained. DM intake was not affected by the feeding system, but 30% CF diet gave higher DM intake. Feed cost per kg weight gain was lower in the 30% CF diet.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1424-1430
• /
• 2013

This paper presents design procedure of the magnetic bearings used for high-speed electric machines and flywheel energy storage systems. Magnetic bearing can be categorized by inner-rotor type and outer-rotor type according to the position of the rotary disc. These two types are applicable based on application environments such as application space, required attraction force, and controllability. Magnetic bearing is generally designed based on the ratio (geometrical coefficient or geometrical efficiency) of pole width to rotor journal radius but proper ratio is only decided by the analysis. This is the difficulty of the magnetic bearing design. In this paper, proper design technology of the inner-rotor type and outer-rotor-type eight pole magnetic bearings is introduced and compared with the FEM analysis results, which verifies the proposed design procedure is suitable to be applied to the design of the magnetic bearings for the industrial applications and flywheel energy storage system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.3
• /
• pp.45-52
• /
• 2002

This article deals with the introduction of longitudinal instability of liquid rocket (pogo) and the analytical results on the frequency responses of Korean Sounding Rocket (KSR-III) propulsion feeding system. Both the stiffness of bellows and the cavitation volume of venturi affect the frequency response of the feeding system. Especially, bellows has a great roll to reduce the natural frequency of the feeding system. Also, oxidizer and fuel feeding systems of the KSR-III have natural frequencies of about 280Hz and 90Hz, respectively.

• Women's Health Nursing
• /
• v.8 no.3
• /
• pp.402-411
• /
• 2002

Purpose: The objective of this study was to identify the effectiveness of continued breast feeding and maternal identity between rooming-in and not rooming-in groups of mothers in post partum care. Method: The subjects were selected by convenient sampling, with 95 women in childbirth completing a questionnaire. The data were collected on the 2nd day after delivery by questionnaire, and after the 4th and 8th weeks by telephone interview. Measures used in this study included general characteristics, breast feeding related characteristics, and the maternal identity scale revised by Koh(1996). The data were analyzed with the SPSS program, and the Chi-test and t-test were used to identify the effect on breast feeding and maternal identity. Results: Continued breast feeding up to 4 weeks after deliverly was not statistically significant between rooming-in and not rooming-in group, but beyond 8 weeks of deliverly, it was significantly different in rooming-in group(p<.01). Maternal identity was significantly higher in rooming-in group than in not rooming-in group(<.01). Conclusion: Mothers preferred rooming-in system because it helped breast feeding and baby care. Rooming-in system provides self confidence in taking care of baby, knowledge about breast feeding and stimulates early phase lactation. We recommend rooming-in system in hospitals to promote breast feeding and maternal identity. Nurses are encouraged to discuss prenatal breast feeding before delivery and rooming-in care should be planned individually for continuation of breast feeding and formation of maternal identity.