• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.900-912
• /
• 2006

A GPS receiving antenna installed in the missile's warhead is designed and fabricated at a center frequency 1.575 GHz. The circular shaped antenna is installed in the middle of the warhead where the antenna's patch and the ground plane are connected with a hollow cylindrical shaped short pin. Using the dual feeding and phase difference method, an omni-directional radiation pattern which direction is normal to the missile's axis(H-plane) is obtained. The optimized diameters of the circular patch and the cylindrical ring typed shorting pin of the GPS receiving antenna which use the FR4.material(dielectric constant $\varepsilon_r=4.6$) are 59.5 mm and 14 mm, respectively. The cylindrical body with diameter 100 mm and height 500 mm is attached to the lower part of the warhead in order to complete the missile figure. The radiation patterns are measured by changing the angle and phase between the dual feeding points. When the phase difference of dual feeding is $100^{\circ}$ and the angle between the dual feeding points is $100^{\circ}$, the nearly omni-directional radiation pattern in the H-plane is obtained. In this case, the antenna gain is -5.55 dBd and the relative level difference between the maximum and the minimum radiation intensity is 3.98 dB.

• Korean Journal of Ecology and Environment
• /
• v.37 no.4 s.109
• /
• pp.394-399
• /
• 2004

The species composition and abundance of aquatic insects were investigated by light trap in summer, 2002 at three stations in the Chikuma River, Japan's longest river. A total of 3278 adults/day were collected, the great majority (57.5%) of which were Diptera, followed by Trichoptera (35.4%) and then Ephemeroptera (7.1%). The number of collected aquatic insects and their biomass gradually increased towards downstream, whereas the number of species and species diversity index (H') decreased. 36 species (H'= 4.30) of aquatic insects were collected at St. 1, versus 31 species (H'= 2.81) at St. 3. Moreover, the relative abundance of functional feeding groups changed from St. 1 to St. 3, i.e., 'collectors' increased and 'shredders' decreased.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.79-84
• /
• 2013

Nanoimprint lithography (NIL) is the next generation photolithography process in which the photoresist is dispensed onto the substrate in its liquid form and then imprinted and cured into a desired pattern instead of using traditional optical system. There have been considerable attentions on NIL due to its potential abilities that enable cost-effective and high-throughput nanofabrication to the display device and semiconductor industry. Although one of the current major research trends of NIL is large-area patterning, the technical difficulties to keep the uniformity of the residual layer become severer as the imprinting area increases more and more. In this paper, with the rolling type imprinting process, a mold, placed upon the $2^{nd}$ generation TFT-LCD glass sized substrate($370{\times}470mm^2$), is rolled by a rubber roller to achieve a uniform residual layer. The prediction of residual layer thickness of the photoresist by rolling of the rubber roller is crucial to design the rolling type imprinting process, determine the rubber roller operation conditions-mpressing force & feeding speed, operate smoothly the following etching process, and so forth. First, using the elasticity theory of contact problem and the empirical equation of rubber hardness, the contact length between rubber roller and mold is calculated with consideration of the shape and hardness of rubber roller and the pressing force to rubber roller. Next, using the squeeze flow theory to photoresist flow, the residual layer thickness of the photoresist is calculated with information of the viscosity and initial layer thickness of photoresist, the shape of mold pattern, feeding speed of rubber roller, and the contact length between rubber roller and mold previously calculated. Last, the effects of rubber roller operation conditions, impressing force & feeding speed, on the residual layer thickness are analyzed with consideration of the shape and hardness of rubber roller.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5447-5451
• /
• 2012

This paper presents a pattern-switchable microstrip patch antenna with loop structure. The loop structure for switchable radiation beam pattern is connected with feeding line of the microstrip patch antenna. As changing switch on/off state, the radiation beam pattern can be changed. The target frequency is 2.4 GHz and maximum radiation gain is 3.2dBi. The proposed antenna is useful for diversity antenna and smart antenna in modern wireless communication including MIMO (Multi-Input Multi-Output) and WLAN system. The sizes of the rectangular patch and the ground plane are $28mm{\times}28mm$ and $40mm{\times}50mm$, respectively. The simulation and experimental results show that the antenna radiation pattern can be changed with switch on/off configuration.

• Korean Parent-Child Health Journal
• /
• v.3 no.1
• /
• pp.46-59
• /
• 2000

The purpose of this study is to determine whether the NCASA (Nursing Child Assessment Sleep/Activity Record) would be suitable to evaluate and to provide the basic resources for a Korean model of sleep/activity patterns during the first 6 months Korean infants' lives and to provide a basis for nursing intervention for mothers of early infants. The subjects of this study were 94 normal infants from birth to 6 months of age who visited the postpartum care center and two general hospitals located in Pusan from February 1 to April 28, 2000. The method of data collection was through convenient sampling. The instrument of this study was the NCASA translated by the Korean parent Child Health Academic Association. The collected data were analysed by mean, standard deviation, frequency percentage and ANOVA, Post Hoc test by use of SPSS/PC. The conclusions obtained from this study are summarized as follows: 1. The mean amount of daytime sleep was 8.06 hours. The mean amount of nighttime sleep was 6.31 hours. The mean amount of total daily sleep was 14.37 hours. The mean of the longest sleep period was 5.20 hours. The mean regularity of daytime sleep was 25.84%. The mean regularity of nighttime sleep was 77.69%. The mean regularity of total daily sleep was 42.60%. The mean frequency of nighttime wakenings was 2.33 times. 2. The mean amount of daytime activity was 8.25 hours. The mean amount of nighttime activity was 1.39 hours. The mean amount of daily total activity was 9.64 hours. The mean of the longest activity period was 3.80 hours The mean frequency of daytime feeding was 5.69 times. The mean frequency of nighttime feeding was 2.08 times. The mean frequency of total daily feeding was 7.74 times. The mean frequency regularity of feeding was 54.62%. The mean frequency of wakenings was 5.14 times. The mean frequency of crying was 1.90 times. 3. According to an analysis of sleep patterns based on an infant's age, there were some significant differences in the following factors: amount of daytime sleep(p<.001), amount of night time sleep(p<.05), amount of total daily sleep (p<.001), longest sleep period(p<.001), regularity of daytime sleep(p<.001), regularity of nighttime sleep(p<.01), regularity of total daily sleep(p<.001), frequency of nighttime wakenings(p<.001). 4. According to an analysis of activity patterns based on an infant's age, there were some significant differences in the following factors: amount of daytime activity(p<.001), amount of nighttime activity(p<.01), amount of total daily activity(p<.001), longest activity period(p<.05), frequency of nighttime feeding(p<.01), frequency of wakenings(p<.001). 5. The mean amount of a mother's day time was 16.30 hours. The mean amount of a mother's night time was 7.70 hours. In conclusion, the initial irregular sleeping and activity patterns of the early infant became regurized as the infant grew older and estabilished firmer patterns of sleeping and of activity.

• 한국해양학회지
• /
• v.27 no.3
• /
• pp.197-209
• /
• 1992

The distribution pattern of macrobenthic polychaete worms and their feeding guild structures were investigated along the coastal region off Kunsan (southeastern Yellow Sea) during the winter season. The polychaete worms, the most dominant infauna, comprised 54 species in 30 families and showed their mean density of 300. indir./m$^2$). Dominant species in the study area were Stermaspis scutata, Lumbrineris cruzensis, Notomastus sp., Nephtys polybranchia, Praxillella affinis. Polychaeres were assigned to 12 feeding guilds and BMX (burrowing, motile, muscular pharynx) was the most dominant feeding guild (26%). Muddy sediments sustained more polychaete worms which showed burrowing (65%), motile (72%), and non-tentaculate strategies (92%), while sandy sediments contained more filter feeders (32%) and sessile (63%), and more tentaculate worms (49%). The sediment grain size was suggested to be the prime factor selecting the polychaete feeding guild.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.3
• /
• pp.334-347
• /
• 2000

The present experiment was carried out to study the utilization of glucose in the mammary gland of crossbred Holstein cattle during feeding with different types of roughage. Sixteen first lactating crossbred Holstein cattle which comprised eight animals of two breed types, Holstein Friesian${\times}$Red Sindhi ($50{\times}50=50%$ HF) and Holstein Friesian${\times}$Red Sindhi ($87.5{\times}12.5=87.5%$ HF). They were divided into four groups of 4 animals each of the same breed. The utilization of glucose in the mammary gland was determined by measuring rates of glucose uptake and the incorporation of glucose into milk components in both groups of 50% HF and 87.5% HF animals feeding on either hay or urea treated rice straw. In early lactation, there were no significant differences of the total glucose entry rate and glucose carbon recycling among groups of crossbred animals feeding on either hay or urea treated rice straw. During lactation advance, the total glucose turnover rates and recycling of carbon glucose of crossbred HF animals feeding on urea treated rice straw were markedly higher than those of crossbred HF animals feeding on hay as roughage, whereas there were no significant changes for both groups of crossbred animals feeding on hay. The percentages and values of non-mammary glucose utilization showed an increase during lactation advance in the same group of both 50% HF and 87.5% HF animals. The percentage of glucose uptake for utilization in the synthesis of milk lactose by the mammary gland was approximately 62% for both groups of 87.5% HF and by approximately 55% for both groups of 50% HF animals feeding on either hay or urea treated rice straw. Intracellular glucose 6-phosphate metabolized via the pentose phosphate pathway accounted for the NADPH (reducing equivalent) of fatty acid synthesis in the mammary gland being higher in 87.5% HF animals during mid-lactation. A large proportion of metabolism of glucose via the Embden-Meyerhof pathway in the mammary gland was more apparent in both groups of 50% HF animals than those of 87.5 % HF animals during early and mid-lactation while it markedly increased for both groups of 87.5% HF animals during late lactation. It can be concluded that utilization of glucose in the mammary gland occurs in a different manner for 50% HF and 87.5% HF animals feeding on either hay or urea treated rice straw. The glucose utilization for biosynthetic pathways in the mammary gland of 50% HF animals is maintained in a similar pattern throughout the periods of lactation. A poorer lactation persistency in both groups of 87.5% HF animals occurs during lactation advance, which is related to a decrease in the lactose biosynthetic pathway.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.12
• /
• pp.1683-1689
• /
• 2001

The levels of urea nitrogen both in blood (BUN) and milk (MUN), and milk protein (MP) reflect protein and energy intake in dairy herd feeding. Blood and milk constituents may be changes rhythmically and influence by different sampling time within a day and after feeding. Trials were conducted using five dietary treatments in both lactating and dry cows to study the effects of sampling time on concentrations of BUN, MUN and whole blood ammonia nitrogen (BAN) in practical dairy cow feeding in Taiwan. The conventional feed ingredients and forages including corn silage, alfalfa hay, timothy or pangola hay and corn grain were used as major source of the diet to follow practical dairy cow feeding. Five different diets were varying in amounts (low=L; standard=S; high=H) of crude protein (P) and energy (E) according to the NRC (1989). The energy to protein ratios in kcal/kg for the PSES, PLES, PHES, PSEH and PSEL were 10.82, 12.54, 9.41, 12.53 and 9.13 in lactating cows, and 11.38, 13.33, 9.78, 13.28 and 9.74 in dry cows, respectively. Results showed that after feeding at 9:30, BUN reached peak at 13:30 and was significantly higher than those to that sampled at 14:30 to 18:30 (p<0.05) in dry cows. Therefore the best blood sampling time for urea nitrogen assay in dry cows is 4 hours after morning feeding. In lactating cows, BUN of 13:30 was significantly higher than those of 8:30 to 11:30 (p<0.05), but there were no significant difference between the BUN values of other sampling time. Hence the suitable blood sampling time for BUN value in lactating cows was located on 3 to 8 hours after morning feeding, but the best time was 4 hours after morning feeding. MUN content is significantly higher in the afternoon collected bulk milk than the fore-strip morning milk (p<0.05), therefore the best sampling time for MUN is from afternoon collected bulk milk. Diurnal BAN changed without traceable rhythmic pattern and was negatively correlated to the BUN (r = -0.78). It is suggested that BAN may not be a good indicator for monitoring dairy cow feeding.

• Journal of electromagnetic engineering and science
• /
• v.5 no.1
• /
• pp.14-20
• /
• 2005

In this paper, a technique is presented for broadbanding the bow-tie slot antenna fed by a CPW(coplanar waveguide). The bandwidth performance of existing bow-tie slot designs is greatly enhanced by optimizing the slot shape and properly adjusting the characteristic impedance of the coplanar waveguide feeding the slot. To connect the 50-ohm input coaxial line to the CPW feed line, a linear taper in the CPW is employed. The designed antenna shows a 3.5 $\~$ 10.0 GHz impedance bandwidth, a 3.5 $\~$ 6.0 GHz pattern bandwidth, and a 5.5 $\~$ 7.5 dBi gain over 3.5 $\~$ 6.0 GHz. Above 6.0 GHz, the antenna radiation pattern appreciably deviates from the typical dipolar pattern.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.55-64
• /
• 2016

The development of high-speed rail (HSR) has had a major impact on the power supply grid. Based on the monitored waveforms of HSR, a pattern recognition approach is proposed for the first time in this paper to identify the operating conditions. To reduce the data dimensions for monitored waveforms, the principal component analysis (PCA) algorithm was used to extract the characteristics and their waveforms from the monitored waveforms data. The dynamic time wrapping (DTW) algorithm was then used to identify the operating conditions of the HSR. Cases studies show that the proposed approach is effective and feasible, and that it is possible to identify the real-time operating conditions based on the monitored waveforms.