• 전기학회논문지
• /
• 제64권12호
• /
• pp.1659-1665
• /
• 2015

In general, AT(Auto-transformer) is used to improve voltage sag and inductive interference in power lines and communication lines in AC electrical railway feeding system. Especially, Korean AT feeding system has different composition compared to other countries like Japan or France, so that it has some special characteristics. However, relays imported from other countries have been used in Korea, and settings of these relays should be modified and reflect distinct characteristics of Korean AT feeding system. Therefore, study about fault analysis based on modeled AT feeding system is important. In this paper, we modeled a single track AT feeding system by using PSCAD and analyzed fault current flow in case of trolley-rail short circuit fault. Finally, we presented current magnitude of each branch expressed by boosting current of AT.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제6권1호
• /
• pp.15-19
• /
• 2003

The study evaluated the influence of feeding different maturity leaves i.e., tender, medium, coarse and mixed leaves of three different maturity during late larval stages of new bivoltine race $(CSR_{3} {\times} CSR_{6})$. The data were compared with shoot feeding and control batches in which conventional feeding method was followed. The most of the larval and cocoon characters were recorded significantly higher in tender leaves fed batches followed by T4 batch (2 times tender and 1 time coarse leaves). Lowest melting percentage (1.494%) was recorded in T4 and highest (4.69%) was recorded in coarse leaf (T3) fed batches. Significantly higher post cocoon parameters viz., average filament length, non-breakable filament length, renditta and raw silk percentage were recorded in tender loaves fed batches.

• 전기학회논문지
• /
• 제67권8호
• /
• pp.1089-1098
• /
• 2018

In this paper, we propose an autonomous feeding robot and its obstacle classification system using ultrasonic sensors to secure the driving safety of the robot and efficient feeding operation. The developed feeding robot is verified by operation experiments in a cattle shed. In the proposed classification algorithm, not only the maximum amplitude of the ultrasonic echo signal but also two gradients of the signal and the variation of amplitude are considered as the feature parameters for object classification. The experimental results show the efficiency of the proposed classification method based on the Support Vector Machine, which is able to classify objects or obstacles such as a human, a cow, a fence and a wall.

• 한국식품영양과학회지
• /
• 제23권1호
• /
• pp.48-54
• /
• 1994

The survey on feeding practice in 202 infants in Kwangju area was undertaken from April to May, 1993. The incidence of breast feeding was 35.6% of the interviewed mothers while 35.1% of infants were formula fed. Baby's sex, birth order, birth weight and mother's educational level did not affect the infant's feeding method of the respondents , but family's monthly income affect it significantly(p<0.05). Initiating time f weaning in infants was 4.83 month. Fruits and fruit juice, infant's most favorite food were the first food introduced to infants. Cereal's were offered frequently as infant foods while animal protein source and vegetables were lesser used 52.8% of mothers purchased commercially prepared infant food , while 33.2% of them did not use it at all. Depending on mother's educational level, mother got information on weaning with the aid of different education materials. The respondents were most interested in the way how to prepare weaning food. It might be suggested that development of effective nutrition education technique specific to the different groups of mothers should be focused.

• 대한감각통합치료학회지
• /
• 제8권1호
• /
• pp.73-86
• /
• 2010

섭식기술의 문제는 성장, 학습, 의사소통, 다른 아동과의 상호작용 등 삶의 모든 면에 영향을 줄 수 있다. 구강섭식은 입을 열고 음식/액체를 입속에 넣고 삼키는 것이다. 본 문헌연구의 목적은 아동의 섭식과 관련된 평가방법과 중재방법에 대해 알아보는 것이다. 섭식은 아동 초기 발달의 중요한 요소이며 일상생활 참여를 촉진한다. 아동이 음식을 먹을 때 받아들이는 방법에 차이가 있다. 그 이유로는 음식으로부터 제공되는 감각자극의 등록과 해석의 과정을 거쳐 섭식행동으로 나타나기 때문이다. 감각처리 문제로 인한 섭식의 문제는 촉각과민성, 구강거부, 촉각과소반응, 구강실 행증으로 분류할 수 있다. 섭식문제의 평가 가운데 감각처리 과정에서 나타날 수 있는 문제들을 확인하고 중재계획을 세우기 위해서는 섭식과 관련된 신경학적 과정을 이해하고 섭식과 관련된 감각처리의 특성을 아는 것이 중요하 다. 또한 감각처리와 관련되어 야기된 섭식문제의 중재방법을 고찰하는 것은 의의가 있으며, 이는 섭식에 관한 효율적인 접근을 통해 아동들에게 보다 나은 삶을 제공할 수 있으리라 기대된다.

• 성인간호학회지
• /
• 제18권5호
• /
• pp.718-726
• /
• 2006

Purpose: The purpose of this study was to investigate differences between a pulmonary aspiration group and a non-pulmonary aspiration group in glucose concentration of tracheal secretions by measuring time and feeding methods. Method: The subjects were 36 ICU patients who were receiving formula via nasogastric tubes and had endotracheal tubes or tracheostomy tubes. Tracheal secretions were collected by connecting suction traps to a suction catheter in three different times(within 1 hour after feeding, between 1 to 2 hours after feeding, and between 2 to 3 hours after feeding) for 2 days, overall six times. Glucose concentration of tracheal secretions was measured with the glucometer(Accucheck II). Results: Glucose concentration of tracheal secretions increased in progression after feeding. The mean of specimens collected last(between two to three hours after feeding) was shown to be the highest value(M=61.61mg/dl) in the pulmonary aspiration group. Significantly(p=.000) more subjects(94.44%) in the pulmonary aspiration group received formula via a 50cc syringe than those in the non-pulmonary aspiration group(22.22%). Conclusion: Critically ill patients may need more time for head-elevation after tube feeding to prevent pulmonary aspiration. In practice, enteral formula should not be given the patients via a $50_cc$ syringe anymore, instead a feeding bag or infusion pump should be used to prevent pulmonary aspiration.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권3호
• /
• pp.365-372
• /
• 2007

This study was conducted to determine effects of salinomycin (SL) on feeding-induced changes in glucose kinetics and blood VFA concentrations in sheep fed a high-roughage diet. Four sheep were fed the diet with or without 20 mg/kg diet of SL once daily for 21 d. Glucose entry and utilization rates were determined during the prefeeding and 3 h postfeeding periods, using a [$^{13}C_6$]glucose dilution method and non-steady state equations. Ruminal characteristics and concentrations of blood VFA, plasma glucose and insulin were also measured during the same periods. A feeding-induced increase in ruminal total VFA concentration tended to be inhibited (p<0.10) with SL, although ruminal pH was unaffected (p>0.10) with SL or by feeding. Salinomycin decreased (p<0.05) acetate proportion and increased (p<0.05) propionate proportion in the rumen, but did not modify these changes in response to feeding (p>0.10). A feeding-induced increase in blood acetate concentration was attenuated (p<0.05) with SL. Salinomycin tended to increase (p<0.10) blood propionate concentration without modifying its response patterns to feeding (p>0.10). Plasma concentrations of glucose or insulin were unaffected (p>0.10) with SL. Salinomycin tended to enhance (p<0.10) glucose entry and utilization rates. Feeding also enhanced (p<0.01) both rates, whereas their interactive effect was not detected (p>0.10). We conclude that SL possibly enhances whole body glucose entry and utilization with an increase in blood propionate concentration in sheep given a high-roughage diet, although SL does not appear to affect their responses to feeding.

• 대한간호학회지
• /
• 제22권1호
• /
• pp.29-41
• /
• 1992

The purpose of this research was to study the effects of antenatal breast care on decreases in breast discomfort and increases in the breast feeding rate during the postpartum period. A nonequivalent control group posttest research design was used. The experimental group consisted of fifty -one pregnant women(primigravida) who were receiving antenatal care in the OBGYN clinics of four hospitals between March 5 and May 30, 1991. The control group was made up of seventy - five postpartum women who delivered at two hospitals OBGYN clinic and one midwife clinic between May 4 and June 15, and between September 5 and October 15, 1991. Data were collected via telephone interviews on the seventh postpartum day and at the end of the second month. Data analysis methods used frequencies and the x$^2$- test. The results were as follows : 1. The rate of breast feeding practice at two months was higher in the experimental group(70.6%) than in the control group(25.3%) (p＜.01). 2. Nipple soreness in the early breast feeding period was lower in the experimental group(14.6%) than in the control group(25.3)(p＜.01). 3. Severe breast discomfort in the early breast feeding period was lower in the experimental group (12.5%) than in the control group(39.2%)(P＜.01). 4. There was a significant relationship between the breast feeding practice and the planned feeding method(p＜.05), and between breast feeding practice and nipple soreness(p＜.01) in the experimental group, and the presence of a job(p＜.01), the sex of the infant(p＜.05), and the first feeding time(p＜.05) in the control group. 5. The reasons for unsuccessful breast feeding were a deficiency of breast milk (66.7% in the experimental group, 30.4% in the control group), poor sucking on the part of the baby(13.3% in the experimental group, 21.4% in the control group).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.221-224
• /
• 2003

In the open die forging process, it is difficult to optimize process parameters such as die shape, initial ingot size, feeding pitch, rotation angle and other process parameters in the operational environments. Therefore in this study, 3D finite element analysis has been performed to obtain optimal process condition for open die forging process. FEM analyses at various feeding pitches and rotation angles provide process conditions to make round bar having precise dimensional accuracy.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1426-1430
• /
• 2009

AC AT feeding method consists return circuits of electric train inserting in parallel between trolly line and feeding line and connecting neutral line to rail and FPW. Due to increasing electric load at feeding system, collecting voltage of train and end voltage are going down. So to increase voltage between trolly line and rail, the usefulness of new autotransformer are considered which variation of short impedance and change of line voltage is simulated with modified winding ratio of autotransformer from 1:1 to variable tab.