• 감성과학
• /
• 제16권4호
• /
• pp.535-544
• /
• 2013

결과에 대한 원인을 추론하는 인지적 정보처리과정에 대한 연구에는 많은 성과가 있었다. 그러나 서로 다른 원인의 무의식적 점화가 과제 결과의 만족도와 과제 재수행에 관한 의사결정에 미치는 영향을 검증한 연구는 찾아보기 어렵다. 본 연구는 암묵적 귀인점화 절차를 사용하여 과제의 결과를 우연 또는 개인적인 노력에 귀인시키는 것이 과제에 대한 만족도와 과제 재수행 의도에 미치는 효과를 알아보기 위해 수행되었다. 이를 위해 지시문을 사용하여 우연과 노력 조건별로 실험참가자들을 점화한 후, O/X 퀴즈 과제 (실험 1) 또는 5지선다형 문제 (실험 2)를 풀게 하였다. 그리고 실제 과제수행 결과와 관계없이 '좋음' 또는 '나쁨'의 피드백을 주고 과제 만족도와 과제의 재수행 의도를 측정하였다. 분석 결과, 과제 만족도는 주로 피드백에 의해 영향을 받지만, 과제 재수행 의도는 피드백과 점화 유형에 따라 상호작용이 있음이 관찰되었다. 즉, '좋음'의 피드백을 받은 조건의 경우, 우연 점화 참가자들보다 노력 점화 참가자들에게서 재수행의도가 높게 나타났고, '나쁨'의 피드백을 받은 조건에서는 우연 점화 참가자들이 노력 점화 참가자들보다 재수행의도가 높았다. 본 연구의 결과는 귀인과 의사결정 관련 연구뿐만 아니라 중독 관련 상담심리연구에도 이론적, 실무적 시사점을 줄 수 있을 것으로 기대한다.

• 한국전문물리치료학회지
• /
• 제19권3호
• /
• pp.40-50
• /
• 2012

The purpose of this study was to investigate the effect of visual feedback on the postural control of stroke patients, by systematically varying conditions of visual feedback [eye-open condition (EO) vs. eye-closed condition (EC)], and base-support (both-side support, affected-side support, and unaffected-side support). In this study, we allocated 41 stroke patients with no damage in the cerebellum and visual cortex who can walk at least 10 meters independently, and 35 normal adults who have no experience of stroke to the control group. Both groups were asked to perform a "sit-to-stand" task three to five times, and their postural control ability was measured and compared in terms of asymmetric dependence (AD) instead of the traditional symmetric index (SI) in the literature. The results showed that although both subject groups maintained better postural control in the EO condition than in the EC condition, the patient group appeared to be more stable in EC than in EO when they were required to perform the task of the support condition given on the affected side. These results implied that visual feedback can impair stroke patients' postural control when it is combined with a specific support condition.

• Educational Technology International
• /
• 제20권1호
• /
• pp.57-81
• /
• 2019

This study aimed to investigate effects of peer feedback types and feedback acceptance levels on academic achievement in project-based learning. The participants were 70 middle-school students taking an English course. They were divided into corrective and suggestive feedback groups. These participants were asked to create user-created content (UCC) as an individual task and provide peer feedback on a peer's UCC in the same type of feedback group. Results showed that there were significant differences in academic achievement according to peer feedback types (corrective vs. suggestive) and feedback acceptance levels (high vs. low). In particular, the suggestive peer feedback group had higher academic achievement than the corrective peer feedback group. Moreover, the group with a high level of feedback acceptance gained higher academic achievement than the group with a low level of feedback acceptance. Moreover, there was an interaction effect between peer feedback types and feedback acceptance on academic achievement. These results indicate that peer feedback types and feedback acceptance should be considered for effective peer feedback activity. These findings provide practical implications for the design and implementation of peer feedback activity in project-based learning.

• 한국안전학회지
• /
• 제33권4호
• /
• pp.72-77
• /
• 2018

There are various approaches to prevent industrial accidents, of which the focus on human factors is behavior based safety(BBS). The BBS provides positive feedback on safety behavior and corrective feedback on unsafe behavior. Determining the feedback ratio of positive and correct feedback is an important issue in BBS. The purpose of this study was to examine the effects of positive and corrective feedback ratio on safety performance and feedback acceptance. The participants of this study were sixty undergraduate and graduate students at C University in Seoul, Korea. Participants were asked to work on a simulated welding task. The independent variable of was different positive vs. corrective feedback ratio (1:1 and 1:4). The dependent variables were the amount and the number of correctly completed work tasks, compliance rate of safety behavior, and feedback acceptance. The experimental design of this study was 2 x 2 mixed design. The results showed that feedback, regardless of the ratio, increased both correctly completed work tasks and the compliance rate of safety behavior, while 1:1 positive vs. corrective feedback ratio was more effective than 1:4 ratio. In addition, 1:1 ratio produced higher level of feedback acceptance compared to 1:4 ratio.

• ETRI Journal
• /
• 제36권6호
• /
• pp.979-987
• /
• 2014

This paper describes new tactile feedback patterns and the effect of their input performance for a button GUI activated by a tap gesture on mobile touch devices. Based on an analysis of touch interaction and informal user tests, several tactile feedback patterns were designed. Using these patterns, three user experiments were performed to investigate appropriate tactile feedback patterns and their input performance during interaction with a touch button. The results showed that a tactile pattern responding to each touch and release gesture with a rapid response time and short falling time provides the feeling of physically clicking a button. The suggested tactile feedback pattern has a significantly positive effect on the number of typing errors and typing task completion time compared to the performance when no feedback is provided.

• 한국전문물리치료학회지
• /
• 제23권4호
• /
• pp.16-26
• /
• 2016

Background: Deficiencies in the ability to maintain balance are common in elderly. Augmented feedback such as knowledge of results (KR) can accelerate learning and mastering a motor skill in older people. Objects: We designed this study to examine whether one session of Wii-Fit game with self-regulated KR is effective for elderly people, and to compare the effect of two different timings of self-regulated KR conditions. Methods: Thirty-nine community-dwelling elders, not living in hospice care or a nursing home, participated in this study. During acquisition, two groups of volunteers were trained in 10 blocks of a dynamic balancing task under the following 2 conditions, respectively: (a) a pre-trial self-regulated KR ($n_1=18$), or (b) a post-trial self-regulated KR ($n_2=21$). Immediate retention tests and delayed retention tests of balancing performance were administered in 15 minutes and 24 hours following acquisition period, respectively. Results: In both groups, significant improvements of balancing performances scores were observed during the acquisition period. Regardless of the group, mean of balancing performance scores on retention tests were well-maintained from the final session. There were no significant differences between groups in balancing performance scores during the acquisition period (p>.05); however, the post-trial self-regulated KR group exhibited significantly higher balancing performance scores in both the immediate retention test and delayed retention test than that of the pre-trial self-regulated KR group (p<.05). Conclusion: Therefore, subjects who regulated their feedback after a dynamic balancing task, during the acquisition period, experienced more efficient motor learning during the retention period than did subjects who regulated their feedback before a dynamic balancing task. Accordingly, in case of presenting the KR of motor learning in clinical settings to elders who reduced dynamic balance abilities, the requesting time of KR is imperative according to self-estimation processes as well as types of KR and practice.

• 대한물리치료과학회지
• /
• 제10권2호
• /
• pp.145-152
• /
• 2003

Recruiting and maintaining capable physical therapists in hospitals is crucial to provide patients with better quality's physical therapy and to achieve hospital business objectives. This study is to provide basic data for effective personnel management of physical therapists in the hospital. For this, this study was conducted to confirm the relationship between turnover intention and job characteristics(task importance, job autonomy, job feedback, task identity, skill diversity), and to find out factors affecting the turnover intention of hospital physical therapists in Korea. The sample used in this study consisted of 173 physical therapists who were working in hospitals located in Seoul from June 18 to 29. The data for analysis were collected by questionnaire survey. The dependent variable of this study was turnover intention and the independent variables were job characteristics(task importance, job autonomy, job feedback, task identity, skill diversity), demographic characteristics of respondents(sex, age, education level, marital status, working hospital, working career). The major statistical methods used for the analysis were factor analysis, t-test, ANOVA, correlation, and hierarchical multiple regression analysis. Turnover intention according to demographic characteristics of respondents was significantly high in the graduate school above group. As the result of hierarchical multiple regression analysis of turnover intention, R2 of job characteristics was much more powerful than demographic characteristics. The factors had significant negative effect on turnover intention were job autonomy, task identity, and skill diversity. And in demographic characteristics factors, there were not significant factors on turnover intention. In considering above findings, for decreasing turnover intention of physical therapists, hospitals need to develop strategies for enhancing job satisfaction by improving job autonomy, task identity, and skill diversity from the adequate job environment.

• 감성과학
• /
• 제5권2호
• /
• pp.63-72
• /
• 2002

In order to examine universal design, 1 have developed two analytical methodologies based on 3P(point) task analysis: structured task analysis and task matrix analysis. I also extracted nine universal design items, namely (1) adjustment, (2) redundancy, (3) specification and function transparency, (4) feedback and (5) error tolerance, (6) effective acquisition of information, (7) ease of understanding and judgment, (8) comfortable operation, and (9) continuity of information and operation. Structured task analysis is used to uncover problems in each of the tasks constituting a job for each functionally challenged condition of users, and solutions to the extracted problems are examined in terms of the above-mentioned nine universal design items. Task matrix analysis calls for the production of a table for each task in a job. In each table, nine items form the columns, and the horizontal rows list all disability types. Then, solutions are formulated for each cell formed by the intersecting columns and rows. Using these two analysis methods, 1 have conducted a verification experiment for the universal design of a public bus. The results of the research have enabled me to propose various ,solutions from a system-based perspective, instead of coming up with the superficial and isolated solutions which are normally produced when conventional analytical methods are used.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2002년도 춘계학술대회 논문집
• /
• pp.144-151
• /
• 2002

In order to examine universal desist I have developed two analytical methodologies based on 3P(point) task analysis: structured task analysis and task matrix analysis. I also extracted me universal design items, namely (1) adjustment (2) redundancy, (3) specification and function transparency, (4) feedback and (5) error tolerance, (6) effective acquisition of information, (7) ease of understanding and judgment (8) comfortable operation, and (9) continuity of information and operation. Structured task analysis is used to uncover problems in each of the tasks constituting a job for each functionally challenged condition of users, and solutions to the extracted problems are examined in terms of the above-mentioned nine universal design items. Task matrix analysis calls for the production of a table for each task in a job. In each table, nine items from the columns, and the horizontal rows list all disability types. Then, solutions are formulated for each cell formed by the intersecting columns and rows. Using these two analysis methods, T have conducted a verification experiment for the universal design of a public bus. The results of the research have enabled me to propose various solutions from a system-based perspective, instead of coming up with the superficial and isolated solutions which are normally produced when conventional analytical methods are used.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.932-938
• /
• 2009

As a stringing troy wire is installed by manual operation, it is necessary to scheme the automatic system for stringing troy wire. To accomplish a task of this kind, in this paper an approach to designing controllers for the hybrid Position/Tension control of a stringing troy wire is presented. Position control system is designed based on equation of dc motor and motion equation of robot, it is controlled by feedback with a detected speed dc motor. Tension control system is designed based on equation of ac servomotor for generating torque and dynamic equation of a troy wire, it is controled by feedback with a detected tension. The control parameters is determined by simulation in independence operation of each system. To suppress a mutual interference that the disturbance occur in operating of two task at same time. Dynamic hybrid control is proposed by feed forward compensator with a disturbance accelerator and a step torque at start. The operation of proposed system is simulated and experimented, results is verified the utilities.