• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.5
• /
• pp.259-268
• /
• 2017

This paper proposes a hydrogen-based social economy derived from fuel cells capable of replacing fossil fuels and resolving global warming, It thus provides an entry for developing economically feasible social configurations to make use of bio-hydrogen production systems. Bio-hydrogen production works from the principle that microorganisms decompose water in the process of converting CO to $CO_2$, thereby producing hydrogen. This study parts from an analysis of an existing 157-ton class NA1 bio-hydrogen reactor that identifies the state of feedstock and reactor conditions. Based on this analysis, we designed a 1-ton class bio-hydrogen reactor process simulator. We carried out thermal analyses of biological heat reactions, sensible heat, and heat radiation in order to calculate the thermal load of each system element. The reactor temperature changes were determined by modeling the feed mixing tank capacity, heat exchange, and heat storage tank. An analysis was carried out to confirm the condition of the feed mixing tank, heat exchanger, heat storage tank capacity as well as the operating conditions of the system so as to maintain the target reactor temperature.

• Journal of Animal Science and Technology
• /
• v.58 no.9
• /
• pp.34.1-34.9
• /
• 2016

Background: By-products of pickled radish (BPR) are considered food waste. Approximately 300 g/kg of the total mass of raw materials becomes BPR. Production of pickled radish has grown continuously and is presently about 40,000 metric tons annually in Korea. The objective of the present study was thus to explore the possibility of using BPR as a ruminant feed ingredient. Results: BPR contained a large amount of moisture (more than 800 g/kg) and ash, and comprised mostly sodium (103 g/kg DM) and chloride (142 g/kg DM). On a dry matter basis, the crude protein (CP) and ether extract (EE) levels in BPR were 75 g/kg and 7 g/kg, respectively. The total digestible nutrient (TDN) level was 527 g/kg and the major portion of digestible nutrients was carbohydrate; 88 % organic matter (OM) was carbohydrate and 65 % of total carbohydrate was soluble or degradable fiber. The coefficient of variation (CV) of nutrient contents among production batches ranged from 4.65 to 33.83 %. The smallest CV was observed in OM, and the largest, in EE. The variation in CP content was relatively small (10.11 %). The storage stability test revealed that storage of BPR at $20^{\circ}C$ (room temperature) might not cause spoilage for 4 d, and possibly longer. If BPR is refrigerated, spoilage can be deferred for 21 d and longer. The in vitro ruminal fermentation study showed that substitution of annual ryegrass straw with BPR improved ruminal fermentation, as evidenced by an increase in VFA concentration, DM degradability, and total gas production. Conclusion: The major portion of nutrients in BPR is soluble or degradable fiber that can be easily fermented in the rumen without adverse effects, to provide energy to ruminant animals. Although its high sodium chloride content needs to be considered when formulating a ration, BPR can be successfully used as a feed ingredient in a ruminant diet, particularly if it is one component of a total mixed ration.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.100-110
• /
• 2000

Studies were conducted to know effects of the bulking agents (saw dusts, mushroom waste, wheat bran coconut meal, rice hulls) adding o moisture control, fermentation methods (aerobic and anaerobic) and periods (1 to 20 days) of food waste fermentation for animal feeds on chemical compositions and in vitro DDM (digestibility of dry matter). Experiment designs were focussed basically to obtain extension service data. The NDF (neutral detergent fiber) composition in the oak and pine saw dust were 93.5% and 95.4% (DM basis) in respectively. Thus, the fermented food waste feeds using saw dust (50%) increased NDF(12%), and decreased in vitro DDM(48%) compared to those of raw materials before aerobic fermentation. The oak saw dust showed higher DDM compared to pine. Mushroom wastes which is a residues of mushroom culture mixed originally willow saw dust (80%) and wheat bran (20%) showed quite higher feed value compared to both saw dusts. It was found that an in vitro DDM and NDF composition in fermented feeds appeared highly dependent or the NDF composition in bulking agents. With an increase wheat bran ratio substitute mushroom waste showed linearly decreased NDF, and increased in vitro DDM in the fermented food waste feeds. The fermented feeds added bottling agents composed higher NDF resulted in higher NDF and lower in vitro DDM with prolonged fermentation time. The feeds from anaerobic fermentation appeared lower NDF and higher in vitro DDM compared to those of aerobic fermentation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.6
• /
• pp.615-635
• /
• 1996

The animal industry must be environmentally sound to ensure its long-term sustainable growth. Livestock wastes mostly manure, can be a valuable resource as well as a potential hazard to environment. The first option of manure management is developing an 'environmentally sound' feeding program and feeds so there are less excreted nutrients that need to be managed. Once the manure is produced it can be best utilized as a fertilizer of a soil conditioner. In many countries the amount of manure that can be spread on land depends on the nutrient requirements of the crop being grown. The laws specify maximum application rates and not animal stocking rates. Farmer who reduce the N and P component of manure can release pressure on the environment without having to reduce the number of animals. There are alternative system for housing and manure treatment which generate manure that are easier to handle and have less pollutants or more economic value. Treated animal waste may also be used as a feedstuff or fuel source. Most of the options of waste management result in increased costs to implement. It is necessary to assess the economics in order to find an acceptable compromise between the increased costs and the benefit to the environment. Animal welfare is also becoming more and more of an issue and it will lead to systems where animals are kept in less confined environment. The new system will have a great impact in the waste management system in the future.

• The Journal of Fisheries Business Administration
• /
• v.51 no.2
• /
• pp.71-87
• /
• 2020

Oysters are the most abundantly harvested type of shellfish in Korea. As export of this marine product increases, oysters have greatly contributed to an increase in fishing income. As the oyster aquaculture industry has rapidly grown since the late 1990s, issues of oyster-shell processing that occur in production processes have re-emerged as important topics in the oyster industry. The amount of oyster shells harvested in 2019 is estimated to be approximately 300,000 tons. With reductions in demand for pyrolytic fertilizer and feed, which are currently the greatest sources of demand, unprocessed shell quantities have doubled compared to 2018, causing them to be an issue once more. Such oyster-shell processing also incurs great costs, and a total of forty-six billion three hundred fifty million Korean won (46,350,000,000 KRW) has been provided from 2009 to 2020 for the use of oyster shells as a resource. According to current Korean laws, oyster shells are considered to be industrial waste if more than 300 kilograms are sent out in a day. Collection and processing must be conducted by a waste-consignment company. Consequently, there are many limitations to the use of oyster shells in Korea as a resource. However, in Japan, only oyster-shell waste is regulated by waste-processing As a result, local governments may apply exceptions when utilized as organic matter. Consequently, in Japan, oyster shells are being used as resources in more diverse fields than in Korea. This study observes the conditions and problems of oyster-shell processing in Korea and attempts to find new domestic oyster-shell resource solutions in light of Japan's recycling practices.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.7
• /
• pp.924-930
• /
• 2010

Ileal and total tract digestibility and nitrogen (N) balance of diets with four different protein sources were determined in growing pigs. The diets were based on rice bran, broken rice and maize meal and contained Tra catfish by-product (CBP), processed using three different methods, and marine fish meal (FM). The CBP diets consisted of the by-product in meal form, ensiled with molasses, and CBP waste water (WWBD). The four diets were fed to four growing pigs fitted with post-valve T-cecum (PVTC) cannulas in a $4{\times}4$ Latin Square design. All experimental diets included $Cr_2O_3$ at 5 g/kg feed as an indigestible marker. The ileal apparent digestibility of organic matter and ether extract was higher on diet WWBD than on the other three diets (p<0.05), and the total tract apparent digestibility was higher on diet WWBD than on the FM diet (p<0.05). The ileal and total tract apparent digestibility of crude protein and amino acids was not significantly different among diets (p>0.05). No significant effects of diet were found on N-retention and N utilization. In conclusion, the catfish by-product meal, ensiled catfish by-product and processing waste water diets and the fish meal diet had similar ileal and total tract apparent digestibility, and similar N utilization in growing pigs.

• Membrane and Water Treatment
• /
• v.8 no.3
• /
• pp.279-292
• /
• 2017

This study was aimed at ultrafiltration (UF) as a pretreatment before reverse osmosis (RO) within the scheme of hybrid reverse osmosis-multistage flush (RO-MSF) desalination. Seawater at elevated temperature (after MSF heat-exchangers) was used as a feed in this process. The pretreatment system was represented as a set of functionally-linked technological segments such as: UF filtration, backwashing, chemical- enhanced backwashing, cleaning, waste disposal, etc. The process represents the sequences of operating cycles. The cycle, in turn, consists of the following unit operations: filtration, backwashing and chemical-enhanced backwashing (CEB). Quantitative assessment was based on the following indicators: normalized permeability, transmembrane pressure, specific energy and water consumption, specific waste generation. UF pre-treatment is accompanied by the following waste streams: $W1=1.19{\times}10$ power of $-2m^3$ (disposed NaOCl with 0.0044% wt.)/$m^3$ (filtrate); $W2=5.95{\times}10$ power of $-3m^3$ (disposed $H_2SO_4$ with 0.052% wt.)/$m^3$(filtrate); $W3=7.26{\times}10$ power of $-2m^3$ (disposed sea water)/$m^3$ (filtrate). Specific energy consumption is $1.11{\times}10$ power of $-1kWh/m^3$ (filtrate). The indicators evaluated over the cycles with conventional (non-chemical) backwashing were compared with the cycles accompanied by CEB. A positive impact of CEB on performance indicators was demonstrated namely: normalized UF resistance remains unchanged within the regime accompanied by CEB, whereas the lack of CEB results in 30% of its growth. Those quantitative indicators can be incorporated into the target function for solving different optimization problems. They can be used in the software for optimisation of operating regimes or in the synthesis of optimal flow- diagram. The cycle characteristics, process parameters and water quality data are attached.

• Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.212-219
• /
• 2009

Emission characteristics of air pollutants from three commercially operating cement kilns co-burning waste were investigated. The major heavy metals emitted were mercury (Hg), zinc (Zn), nickel (Ni), chromium (Cr), lead (Pb), cadmium (Cd), and arsenic (As) Removal efficiency of the bag filter was above 98.5% for heavy metals (except Hg), and above 60% for Hg. Higher fractions of heavy metals entering the bag filter were speciated to cement kiln dust. On average, 3.3% of the -heavy metals of medium and low toxicity (Pb, Ni, and Cr) entering the bag filter were released into the atmosphere. Among highly toxic heavy metals, 0.14% of Cd, 0.01% of As, and 40% of Hg entering the bag filter were released into the atmosphere. In passing through the bag filter, the proportion of oxidized Hg in all cases increased. Emission variations of hazardous air pollutants in cement kilns tested were related to raw materials, fuel, waste feed and operating conditions. Volatile organic compounds detected in gas emissions were toluene, acrylonitrile benzene, styrene, 1,3-butadiene, and methylene chloride. Although hazardous air pollutants in emissions from cement kilns co-burning waste were within the existing emission limit, efforts are required to minimize their levels.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.111-116
• /
• 2001

Waste office paper, photocopied or laser printed, has recently increased along with office automatization. In waste office paper, toner ink is used as the printing medium in place of conventional oil ink. Since toner ink cannot be saponificated by alkali and be decolored by bleaching, different from the case of oil ink, toner remains on regenerated paper as black specks. Although cascade recycling of waste office paper is compelled at present, the demand for low-grade paper is limited. From such circumstances, a new separation process for waste office paper is demanded to achieve parallel recycling. At the first stage of separation studies, the sharpness of separation is evaluated using small separators to obtain fundamental data. In a lab-scale separator, the sample amount of one feed is generally a few grams. However, the sample amount used for brightness, ERIC, and image analysis that are generally used to evaluate the efficiency of deinking are not small for lab-scale tests of these analyses. This paper describes an investigation of a sheet preparation method by a small amount of sample under 0.5g and compares the precision of toner content determination of spectroscopic analysis and image analysis from the viewpoint of separation evaluation. The easiness and convenience of the operation using only general-purpose equipments has also been set as a principle purpose. From the viewpoint of an analysis that yields high precision with a small amount of sample in short time, the method calculating the absorption coefficient from diffuse reflectance in the visible region is the most rational method in this study.

• Clean Technology
• /
• v.9 no.1
• /
• pp.23-28
• /
• 2003

The generation of food waste in Korea amounts to 4.10 million per year, which corresponds to 820,000 dry ton of organic waste. This has been used traditionally as animal feed or soil conditioner, but its efficacy has remained doubtful in recent years. In this study as an alternative we considered methane production by anaerobic treatment, which has an advantage of 200 million US dollars over aerobic methods. The production of methane amounts to $4.40{\times}10^8m^3$, 3.43% of $1.28{\times}10^8m^3$, total natural gas used in Korea. Furthermore the methane from household kitchen food waste amounts to 28.9% of the total gas used in the kitchen.