• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.54-61
• /
• 1995

Simultaneous forward-backward extrusion upsetting has been carried out by ratray forging. Two materials has been used commericaly 6.61 aluminium ally and 0.2% steel. The effects of working conditions ; spiral feed ; initial aspect ration of specimen and lubricating condition on the backward and forward extrusion were clarified. The extrusion length increases a sthe aspect rationof the specimen increases, the backward extrusion lengthbeing relatively larger than the forward one. The effects of the spiral feed and the material on the extrusion lengthis remarkably large for the large spiral feed.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.551-555
• /
• 2011

The Crab label tag with a loop matching feed and a modified dipole antenna structure was proposed. The antenna impedance is conjugated easily to a radio frequency identification IC chip impedance by a loop matching feed. The reading range of the crab structure tag is 0.9-1.0 m from the upper side of the formula milk can lid. The fabricated label tag size is $44.0{\times}44.0mm^2$. The operating frequency at -3 dB return loss is 861.0-929.0 MHz, and the maximum reading range at the anechoic chamber is 1.5 m.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권11호
• /
• pp.1866-1872
• /
• 2020

Objective: The objective of the present experiment was to construct self-draining beds to keep surface bedding materials clean and dry for beef cattle comfort in a temperate climate. Methods: In Experiment 1, a self-draining bed was covered with sand at depths of 10 cm (S-10a), 15 cm (S-15), and 20 cm (S-20) respectively. In Experiment 2, self-draining beds of different sizes were covered with 10 cm of sand (S-10b) and wood shavings (WS) at depths of 15 cm and 20 cm (WS-15 and WS-20). Fifteen cattle were engaged to evaluate the comfort of self-draining beds covered with different bedding materials. Results: No cattle lay in the feed alley and cattle spent more time lying on S-10a than S-15 or S-20 in Experiment 1 (p<0.01). No difference in lying time was detected between S-15 and S-20 (p>0.05). In Experiment 2, no cattle selected the feed alley as the lying area. Cattle preferred WS-15 as the lying area and time spent lying on WS-20 was slightly higher than on S-10b (p<0.05). Feces weight was higher in the feed alley than in the different bedding areas in both Experiments 1 and 2 (p<0.01). Conclusion: Sand-bedding depth at 10 cm and WSs at 15 cm above the self-draining bed can provide for the lying comfort of beef cattle. Design of a special feed alley to hold most of the feces to keep bedding materials clean and dry is desirable for organic beef cattle in a loose barn.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.121-128
• /
• 1996

Floating zone법으로 $LiNbO_3$ 단결정올 육성하는데 있어서 원료분말 합성과 원료봉 소결 과정의 최척의 조건을 설험적으로 조사하였다. 원료분말 합성사 낮은 고상반응 온도(700, $800^{\circ}C$)에서는 미량의 $Li_2CO_3$와 $Nb_2O_5$가 미반응상태로 남아있고, 고상반응 온도가 높을 때 ($1000^{\circ}C$)에는 입자성장이 일어나 후속공정인 원료봉 소결에 악영향을 미침이 확인되었다. $950^{\circ}C$에서 12시간 고상반응시킨 원료분말이 $LiNbO_3$의 결정상을 가지면서 미세한 결정립 크기와 균일한 크기분포를 보여 $950^{\circ}C$, 12시간이 최적의 원료분말 합성조건이었다. 원료봉 소결시 소 결온도가 높아질수록, 또 소결시간이 늘어날수록 치밀도가 증가하고 업자성장 양상이 급격히 증가함을 알 수 었었다. $1100^{\circ}C$에서 2시간 동안 소결한 원료봉이 치밀하고, 작은 결정립 크기 와 균얼한 크기분포를 나타내어 floating zone법에 의한 $LiNbO_3$ 단결정성장에 가장 적합한 최적 의 소결 조건은 $1100^{\circ}C$, 2시간엄이 확인되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.19-22
• /
• 2016

A Superconducting High Gradient Magnetic Separation (HGMS) system is proposed for treatment of feed-water in thermal power plant [1]. This is a method to remove the iron scale from feed-water utilizing magnetic force. One of the issues for practical use of HGMS system is to extend continuous operation period. In this study, we designed the magnetic filters by particle trajectory simulation and HGMS experiments in order to solve this problem. As a result, the quantity of magnetite captured by each filter was equalized and filter blockage was prevented. A design method of the magnetic filter was proposed which is suitable for the long-term continuous scale removal in the feed-water system of the thermal power plant.

• 한국균학회지
• /
• 제34권1호
• /
• pp.29-33
• /
• 2006

버섯(mushroom)의 가축사료화 가능성을 조사하여 친환경농업 소재개발의 기초자료로 활용하고자 시험한 결과, 팽이버섯 탈병배지를 육게사료에 5~10% 첨가시 사료절감 10~20%, 복강지방 감소 25~37% 및 육질개선 효과가 있었다. 또한 팽이버섯 탈병배지를 육계사료에 5~10% 첨가하여 사육한 닭고기는 아미노산 함량이 33~38% 증가하였으나, 20% 이상 첨가시는 오히려 감소하는 경향이었다.

• 한국분말재료학회지
• /
• 제10권5호
• /
• pp.349-352
• /
• 2003

This study examined the correlation of various operational factors including reaction temperature and the quantity of reductant and diluent with the characteristics of powder using $K_2$ TaF$_{7}$ as feed materials, Na as a reductant and KCl/KF as a diluent. Also to control the particle size and shape, external supply system developed, it can provide a feed material and a reductant at a fixed quantity and evaluated the characteristics of tantalum powder. When the external supply system was applied instead of the batch type process that charges feed material, reductant and diluent at the same time, it was possible to induce regular reduction reaction between feed material and reductant, which increased the recovery rate and reduced the mixture of impurities. In particular, the application of the external supply system enabled the control of reaction temperature and reaction speed according to the feeding rate of feed material during reduced reaction, and resultantly it enabled the manufacturing of granular-shaped powder with a regular granularity of 2∼3 ${\mu}{\textrm}{m}$ and purity of 99.5%.

• 해양환경안전학회지
• /
• 제20권3호
• /
• pp.304-311
• /
• 2014

In this study, to apply hydrogen energy to ship engine and to generate effective hydrogen production, we investigated the effects of high temperature $H_2SO_4$ feed rate and cooling water rate to pump parts with fixed frequency needed to reciprocate motion and a simulation was conducted at each condition. In the fixed frequency and cooling water inlet flow rate of 0.5 Hz and 3.9 kg/s, we changed the high temperature $H_2SO_4$ flow rate to 47.46 kg/s (it is 105 % of 45.2 kg/s), 49.72 kg/s (110 %), and 51.98 kg/s (115 %). Also, at 0.5 Hz and 45.2 kg/s of frequency and high temperature $H_2SO_4$ flow, the thermal hydraulic analysis was performed at the condition of 95 % (3.705 kg/s), 90 % (3.51 kg/s), and 85 % (3.315 kg/s). In overall simulation cases, the physical properties of materials are more influential to the temperature increase in the pump part rather than the changes on the feed rate of high temperature $H_2SO_4$ and cooling water. A continuous operation of pump was also capable even if the excess feed of high temperature $H_2SO_4$ of about 15 % or the less feed of cooling water of about 15 % were performed, respectively. When the increasing feed of high temperature $H_2SO_4$ of up to 5 %, 10 %, and 15 % were compared with base flow (45.2 kg/s), the deviation of time period rose to a certain temperature and ranged from 0 to 4.5 s in the same position (same material). In case of cooling water, the deviation of time period rose to a certain temperature and ranged from 0 to 5.9 s according to the decreasing feed changes of cooling water at 5 %, 10 %, and 15 % compared to a base flow (3.9 kg/s). Finally, the additional researches related to the two different materials (Teflon and STS for Pitch and End-plate), which are concerned about the effects of temperature changes to the parts contacting different materials, are needed, and we have a plan to conduct a follow-up study.

• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.689-694
• /
• 1992

Strontium Titanate single crystal is grown by Verneuil method. Feed materials were prepared by coprecipitation method which started with Sr(NO3)2 and TiCl4. SrTiO3 can not be grown from feed materials having the stoichiometric components due to volatilization of SrO, when the powder added more 3 wt% SrO used, the crystal can be grown. Growth conditions that the pressure of oxygen and hydrogen gas was 5 psi, the flow rate of oxygen and hydrogen was 7.3 and 30ι/min respectively, the growth rate was 20 mm/hr were optimum. The grown single crystal has the diameter of 10~15 mm and its length is 30~40 mm. The grown crystal was deep brown color and somewhat transparent. The color of grown crystal was lightened after annealing.

• 한국정밀공학회지
• /
• 제32권4호
• /
• pp.329-337
• /
• 2015

In this paper, a simulation based estimation method of energy consumption of the spindle and feed drives for the NC machine tool during the cutting process is proposed. To predict energy consumption of the feed drive system, position, velocity, acceleration and jerk of the table are analyzed based on NC data and then the power and energy are calculated considering friction force and mass of the stages. Energy consumption of the spindle is estimated based on models from acceleration motion of rotating parts, friction torque and power loss of motors. Moreover, simulation models of cutting power and energy for the material removal along the NC tool paths are proposed.