• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.s01
• /
• pp.98-114
• /
• 1988

This study was conducted to investigate the status and prospects of seed quality researches in rapeseed. Rapeseed Quality was mainly related to oil and protein content, fatty acid composition and glucosinolate content. Hence, breeding for improvement of rapeseed Quality has been emphasized as follows: 1) inheritance mode, 2) investigation of germplasm, 3) establishment of analysis technique, 4) establishment of selection method, 5) idealization of cultural technique. The oil quality is determined by its fatty acids. Fatty acids have been determined by gas chromatography. To improve oil quality was emphasized for zero erucic acid, the highest possible linoleic acid and the lowest possible linolenic acid content. Rapeseed meal is not considered as top quality feed ingredient although it has higher protein content and well-balanced amino acid composition. This is mainly because of the presence of considerable amounts of glucosinolates. Thus the reduction of glucosinolate content in rapeseed meal is of great importance. In breeding for meal quality, low glucosinolate lines (plants) were selected and analyzed by gas chromatography and UV-spectrophotometer. Current problems and future researches of rapeseed quality in Korea are 1) improvement of researcher's number and facilities, 2) depression of animal feeding trials, 3) unsatisfied relationship between research and manufacturing and products field, 4) improvement of fertility for yellow and thin seed coat lines crossed between mustard and rapeseed, 5) establishment of new rapid analysing system for rapeseed quality.

• Geophysics and Geophysical Exploration
• /
• v.17 no.1
• /
• pp.34-44
• /
• 2014

Because offshore plant industry needs to design, deploy and operate much of equipment especially, the latest trend shows the installation of production facilities is augmented in the subsea. The installed facilities are very difficult to be repaired or changed because they are located in the subsea. For solving these problems, both the directly related information of the production like the optimal number, position and depth of wells and the distribution for effective operation and safety of equipment of subsea should be considered at the preliminary stage of FEED (Front End Engineering Design). The marine exploration is introduced in this paper for providing the fundamental technology to answer the questions related to above considering points. First, some kinds of the offshore plant facilities are enumerated and aims of marine exploration for the offshore oil/gas development are summarized. In addition to it, the main roles of marine survey, in the step of designing and installing offshore oil-gas plant, development are briefly listed. And then foreign examples are shown to help the reader's understand. This paper is hoped to be helpful for understanding the marine exploration that can be applied to offshore oil/gas plant and to be contributed to developing the domestic techniques in this field for the future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.195-200
• /
• 2020

With the growing interest in fossil fuel depletion and environmental pollution, railroad cars operating in Korea are in progress as the conversion from diesel to electric vehicles expands. The photovoltaic system, which is applied as an example of the conversion of electric vehicles, is infinite and pollution-free, and can produce energy without generating hazards such as air pollution, noise, heat, and vibration, and maintain fuel transportation and power generation facilities. There is an advantage that is rarely needed. However, the amount of electricity produced depends on the amount of solar radiation by region, and the energy density is low due to the power generation of about 25㎡/ kWp, so a large installation area is required and the installation place has limited problems. In view of these problems, many studies have been applied to fuel cells in the railway field. In particular, the plan to link the fuel cell power generation system railroad power supply system must be linked to the power supply system that supplies power to the railroad, unlike solar and wind power. Therefore, it has a close relationship with railroad cars and the linkage method can vary greatly depending on the system topology. Therefore, in this paper, we study the validity through simulation modeling related to linkage analysis according to system topology.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.164-170
• /
• 2017

The CNC machine tool field is showing a growing trend with the recent rapid development of manufacturing industries such as semiconductors, automobiles, medical devices, various inspection and test equipment, mechanical metal processing equipment, aircraft, shipbuilding and electronic equipment. However, small and medium-sized machining companies that use CNC machine tools are experiencing difficulties in increasingly intense competition. Especially, small companies which are receiving orders from 3rd or 4th venders are very difficult in business management. In recent years, company S experienced difficulty to make product quality and delivery time due to the ignorance of the processing method when manufacturing cooling plate jig made of SUS304 material used for cell phone liquid crystal glass processing. In order to solve these problems, we redesigned the process according to the size of our company and tried to manage all processes with quantified data. In the meantime, we have found that there is a need to improve the cutter process, which accounts for most of the machining process. Therefore, we have investigated the correlation between RPM and FEED of three cutters that have been used in the past. As a result, we found that it is the most urgent problem to solve the roughing process during the cutter operation which occupies more than 70% of the total machining. In order to shorten the machining time and improve the quality in machining of SUS304 cooling plate jig, we select the main factors such as price, tool life, maintenance cost, productivity, quality, RPM, and FEED and use AHP to find the most suitable milling cutter. We also tried to solve the problem of delivery, quality and production capacity which was a big problem of S company through experiment operation with selected cutter tool. As a result, the following conclusions were drawn. First, the most efficient of the three cutters currently available in the machining center has proven to be an M-cutter. Second, although one additional facility was required, it was possible to produce the existing facilities without additional investment by supplementing the lack of production capacity due to productivity improvement. Third, the Company's difficulties in delivery and capacity shortfalls have been resolved. Fourth, annual sales increased by KRW 109 million and profits increased by KRW 32 million annually. Fifth, it can confirm the usefulness of AHP method in corporate decision making and it can be utilized in various facility investment and process improvement in the future.

• Clean Technology
• /
• v.26 no.4
• /
• pp.239-250
• /
• 2020

Biomass is an abundant renewable energy resource that can replace fossil fuels for the reduction of greenhouse gas (GHG). Indonesia has a large number of cheap biomass feedstocks, such as reforestation (waste wood) and palm residues (empty fruit bunch or EFB). In general, raw biomass contains more than 20% moisture and lacks calorific value, energy density, grindability, and combustion efficiency. Those properties are not acceptable fuel attributes as the conditions currently stand. Recently, torrefaction facilities, especially in European countries, have been built to upgrade raw biomass to solid fuel with high quality. In Korea, there is no significant market for torrefied solid fuel (co-firing) made of biomass residues, and only the wood pellet market presently thrives (~ 2 million ton yr-1). However, increasing demand for an upgraded solid fuel exists. In Indonesia, torrefied woody residues as co-firing fuel are economically feasible under the governmental promotion of renewable energy such as in feed-in-tariff (FIT). EFB, one of the chief palm residues, could replace coal in cement kiln when the emission trading system (ETS) and clean development mechanism (CDM) system are implemented. However, technical issues such as slagging (alkali metal) and corrosion (chlorine) should be addressed to utilize torrefied EFB at a pulverized coal boiler.

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.89-95
• /
• 2020

Livestock facilities in Korea are on their way of enlargement resulting in increment of livestock manure. When the livestock manure treated inappropriate way during application to the agricultural area, environmental damage can be occurred such as bad smell, water and air pollution. Therefore it is important to make a good management plan for livestock manure treatment. In order to effectively apply organic fertilizer made by livestock manure in terms of quantity and quality, the current status of nutrient in agricultural land should be calculated quantitatively by scientific way. The OECD suggest member countries to calculate the nutrient balance as an agricultural environment indicator which represents the difference between nutrient inputs and outputs of the amount of nutrients in various ways. In this paper, we calculated the nutrient balances according to three cities which have different characteristics such as urban or rural areas. To reduce the nutrient balance, we considered how to reduce the amount of chemical fertilizer by using organic fertilizer made by livestock manure. And public treatment facilities for livestock manure can be a good solution except civil complaints for location selection. Among the options, manure fertilizer application to the agricultural area for cultivation of forage crops was mainly considered to reduce the nutrient balance by decreasing input of chemical fertilizers and increasing output of crop production. Using the field monitoring data, it can be calculated that the daily nitrogen reductions by 116.5 kg/ha and the daily phosphorus increments by 2.7 kg/ha.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.437-446
• /
• 1993

More realistic calculation models for evaluating man's annual intakes of radionuclides released from operating nuclear facilities were established. For the application of these models, the harvest years of food and feed crops consumed in the year of dose assessment and every year's average concentrations of a radionuclide in air and in water for the whole period of real operation had to be taken into account. KFOOD, an existing equilibrium food chain computer code for the Korean dose assessment, was modified according to the models. Sample runs of the modified code on the assumption of a constant release during 10 years' operation were made with three kinds of the input data files enabling the dose assessment in the improved method, the KFOOD method and another existing method, respectively, and the results were compared. Annual committed effective doses to Korean adult by intakes of Mn-54, Co-60, Sr-90, I-131 and Cs-137 calculated in the improved method were about 11, 2, 5, 60 and 3%, respectively, lower than the corresponding KFOOD dose. To the intakes of the radionuclides except Sr-90 evaluated in the improved method, foliar uptake contributed much more than root uptake did but, in the case of Sr-90, the result was opposite.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.4
• /
• pp.105-114
• /
• 2022

As the national income level is improving, housing urbanization and economic speed are progressing rapidly, household waste and food waste are rapidly increasing. The "Waste Management Act" (founded in 1991) introduced the volume-based household waste system in 1995, and even after implementation, the odor of food waste and the prompt disposal process continue to be a social problem.For this reason, the food waste recycling business is attracting attention. In this paper, regarding the role of resource recycling such as feed, compost, and other resources of food waste, this thesis aims to reduce the inefficiency of the recycling process. Data Envelopment Analysis (DEA) of the relationship between inputs and outputs of 33 facilities nationwide, excluding facility data (insufficient) among 394, (238 public, and 156 private ones), as of the end of 2020, which is running a domestic resource recycling project This study was conducted to investigate the important role in the relative management performance of food waste recycling facilities.It was hypothesized that the influence of business history, facility capacity, capital, and machinery of a company running a food waste recycling business on sales was tested.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.2
• /
• pp.161-170
• /
• 1982

A trial on the seed production of red sea-bream (Chrysophrys major) was made in Jejudo island at the southern end of Korea, from June, 1980 to August, 1981. Histological observation of the gonads indicated that the main spawning season was June to early July in Jejudo area. The newly-hatched fry were fed Brachionus sp. in the later stages Artemia nauplii, Tigriopus sp. and the minced fish flesh were given. Though during the winter season the water temperature in rearing tanks was decreased as low as $9.2^{\circ}C$, continuous feeding to the juveniles was carried out, showing body weight increase. This implies that winter rearing of juveniles in the near-shore facilities is feasible in the vicinity of Seogwipo area, in Jejudo. Feed coefficient of the juveniles (>23.2 g) was $4.16\sim4.77$ when fed the minced fish flesh.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.539-549
• /
• 2017

In water treatment process using microfiltration membranes, manganese is a substance that causes inorganic membrane fouling. As a result of analysis on the operation data taken from I WTP(Water Treatment Plant), it was confirmed that the increase of TMP was very severe during the period of manganese inflow. The membrane fouling fastened the increase of TMP and shortened the service time of filtration or the cleaning cycle. The TMP of the membrane increased to the maximum of $2.13kgf/cm^2$, but it was recovered to the initial level ($0.17kgf/cm^2$) by the 1st acid cleaning step. It was obvious that the main membrane fouling contaminants are due to inorganic substances. As a result of the analysis on the chemical waste, the concentrations of aluminum(146-164 mg/L) and manganese(110-126 mg/L) were very high. It is considered that aluminum was due to the residual unreacted during coagulation step as a pretreatment process. And manganese is thought to be due to the adsorption on the membrane surface as an adsorbate in feed water component during filtration step. For the efficient maintenance of the membrane filtration facilities, optimization of chemical concentration and CIP conditions is very important when finding the abnormal level of influent including foulants such as manganese.