• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.73-74
• /
• 2000

In recent years, attempts have been made to greatly improve the display quality of active-matrix liquid crystal display devices, and many techniques have been proposed to solve such problems as gate signal delay, feed-through voltage and image sticking[1-3]. To improve these problems which are caused by the feed-through voltage, we have evaluated new driving methods to reduce the feed-through voltage. Two level gate-pulse was used for the gate driving of the cst-on-common structure pixels. These gate driving methods offer better feed-through characteristics than conventional simple gate pulse. Optimized step signal will compensate by step pulse time and voltage. The evaluation of the suggested driving methods were performed by using a TFT-LCD array simulator PDAST which can simulate the gate, data and pixel voltages of a certain pixel at any time and at any location on a TFT array. The effect of the new driving method was effectively analyzed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.178-190
• /
• 1999

This study was conducted to develop a simulation model for the growth dynamics of pigs and to describe quantitatively protein deposition depending on the amino acid composition of feed protein. In the model it is assumed that the essential processes that determine the utilization of feed protein in the whole body are protein synthesis, breakdown of protein, and oxidation of amino acid. Besides, it is also assumed that occurrence of protein deposition depends on genetic potential and amino acid composition of feed protein. The genetic potential for the protein deposition is the maximum capacity of protein synthesis, being dependent on the protein mass of the whole body. To describe the effect of amino acid composition of feed on the protein deposition, a factor, which consist of ten amino acid functions and lie between 0 and 1, is introduced. Accordingly a model was developed, which is described with 15 flux equations and 11 differential equations and is composed of two compartments. The model describes non linear structure of the protein utilization system of an organism, which is in non steady state. The objective function for the simulation was protein deposition(g/day) cal culated according to the empirical model, PAF(product of amino acid functions) of Menke. The mean of relative difference between the simulated protein deposition and PAF calculated values, lied in a range of 11.8%. The simulated protein synthesis and breakdown rates(g/day) in the whole body showed a parallel behavior in the course of growth.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.11
• /
• pp.1295-1300
• /
• 2009

A 2,172-bp full-length gene (aga-F78), encoding a protease-resistant $\alpha$-galactosidase, was cloned from Rhizopus sp. F78 and expressed in Escherichia coli. The deduced amino acid sequence shared highest identity (45.0%) with an $\alpha$-galactosidase of glycoside hydrolase family 36 from Absidia corymbifera. After one-step purification with a Ni-NTA chelating column, the recombinant Aga-F78 migrated as a single band of ~82 and ~210 kDa on SDS-PAGE and nondenaturing gradient PAGE, respectively, indicating that the native structure of the recombinant Aga-F78 was a trimer. Exhibiting the similar properties as the authentic protein, purified recombinant Aga-F78 was optimally active at $50^{\circ}C$ and pH 4.8, highly pH stable over the pH range 5.0-10.0, more resistant to some cations and proteases, and had wide substrate specificity (pNPG, melidiose, raffinose, and stachyose). The recombinant enzyme also showed good hydrolytic ability to soybean meal, releasing galactose of $415.58\;{\mu}g/g$ soybean meal. When combined with trypsin, the enzyme retained over 90% degradability to soybean meal. These favorable properties make Aga-F78 a potential candidate for applications in the food and feed industries.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.10
• /
• pp.1419-1426
• /
• 2015

This study aimed to investigate the effect of the ratio of non-fibrous carbohydrates to neutral detergent fibre (NFC/NDF) and undegraded dietary protein (UDP) on rumen fermentation and nitrogen metabolism in lambs. Four $Dorper{\times}thin-tailed$ Han crossbred lambs, averaging $62.3{\pm}1.9kg$ of body weight and 10 mo of age, were randomly assigned to four dietary treatments of combinations of two levels of NFC/NDF (1.0 and 1.7) and two levels of UDP (35% and 50% of crude protein [CP]). Duodenal nutrient flows were measured with dual markers of Yb and Co, and microbial N (MN) synthesis was estimated using $^{15}N$. High UDP decreased organic matter (OM) intake (p = 0.002) and CP intake (p = 0.005). Ruminal pH (p<0.001), ammonia nitrogen ($NH_3-N$; p = 0.008), and total volatile fatty acids (p<0.001) were affected by dietary NFC/NDF. The ruminal concentration of $NH_3-N$ was also affected by UDP (p<0.001). The duodenal flow of total MN (p = 0.007) was greater for lambs fed the high NFC/NDF diet. The amount of metabolisable N increased with increasing dietary NFC:NDF (p = 0.02) or UDP (p = 0.04). In conclusion, the diets with high NFC/NDF (1.7) and UDP (50% of CP) improved metabolisable N supply to lambs.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.235-240
• /
• 2007

A ceramic stem based TO package incorporating a coplanar waveguide feed-line has been proposed allowing for 10 Gbps grade data transmission. The frequency response of a cylindrical feed-line fer a conventional metal based TO package was first analyzed, and compared with that of the CPW feed-line used for a ceramic based package such as a butterfly package. For the case where a DFB LD chip is packaged to an LD module, the measured 3 dB frequency bandwidths for the conventional and proposed packages were 3.5 GHz and 7.8 GHz respectively, which agree well with the theoretical results obtained from the modeling based on the small signal equivalent circuits. Consequently, we proposed a novel ceramic based TO package with a CPW feed-line in ceramic material as a stem to improve the frequency characteristics of the conventional one. And, its performance was theoretically observed to confirm that the proposed package provides even wider frequency bandwidth compared to the conventional one.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.413-417
• /
• 2001

High speed linear motor feed system has been simulated using neural network technique. Due to the limited resources, control gain tuning has been the most troublesome part in controller design. Regardless of the system structure, conventional control gain could be adjusted minimizing the resulting error using the proposed method. Slight performance deterioration was observed at the small value of training epoch.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.259-263
• /
• 2002

We design and characterize a millimeter-wave ceramic package in a frequency range from DC to 300Hz using the FEM(Finite Element Method) calculation. From these calculation results, the designed feed-through structure achieved 0.32 dB, 16.8 dB of the insertion loss and the return loss at 30 GHz respectively. This ceramic package will be useful for MMIC(Monolithic Microwave Integrated Circuit) modules.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.147-151
• /
• 2002

We fabricated and characterized a millimeter-wave ceramic package in a frequency range from 6 to 40㎓ using the LTCC(Low Temperature Cofired Ceramic) Technology and TRL(Thru-Reflect-Line) calibration method. From these measurement results, the fabricated feed-through structure achieved 0.5 dB, 14 dB of the insertion loss and the return loss at 30 GHz respectively. This ceramic package will be useful for MMIC(Monolithic Microwave Integrated Circuit) modules.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.36-40
• /
• 2007

It uses a tank to store, purify and feed lube oil in power plants, which is made by steel plate. Several pumps to feed lube oil are installed on the top plate of the oil tank. In this case if pumps on the top plate are removed or added, the dynamic characteristics of the structure will be changed. In this paper, we present that we analyze in detail the similar case with a finite element model for tank & pump structure coupled with oil and that we set plan to change mode shapes on the top plate of the tank.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.352-357
• /
• 2001

In this study, residual stress was investigated to evaluate damaged layer in high speed machining through simulation. In machining steel(STDll), residual stress remaining in machined surface was mainly appeared as compressive stress. The scale of this damaged layer more depends on feed per tooth and radial depth than spindle speed. Damaged layer was measured by optical microscope and hardness method. The micro-structure of damaged layer was a martensite because of cutting force and cutting temperature. Thickness of damaged layer is increased with incresing of feed per tooth and radial depth.