• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.172-174
• /
• 2003

In this paper, we analyze the traveling-wave electro-absorption modulator (TW-EAM) in consideration of the microwave feed-line. The TW-EAM is analyzed by using the equivalent circuit model. The microwave feed-line isanalyzed by momentum method. In a view point of microwave characteristics, we present the effect of the structure and the length of microwave feed-line.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.235-240
• /
• 2007

A ceramic stem based TO package incorporating a coplanar waveguide feed-line has been proposed allowing for 10 Gbps grade data transmission. The frequency response of a cylindrical feed-line fer a conventional metal based TO package was first analyzed, and compared with that of the CPW feed-line used for a ceramic based package such as a butterfly package. For the case where a DFB LD chip is packaged to an LD module, the measured 3 dB frequency bandwidths for the conventional and proposed packages were 3.5 GHz and 7.8 GHz respectively, which agree well with the theoretical results obtained from the modeling based on the small signal equivalent circuits. Consequently, we proposed a novel ceramic based TO package with a CPW feed-line in ceramic material as a stem to improve the frequency characteristics of the conventional one. And, its performance was theoretically observed to confirm that the proposed package provides even wider frequency bandwidth compared to the conventional one.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.276-281
• /
• 2001

The KSR-III Main Propulsion System configuration of the liquid oxygen (LOX) feed line is analyzed. This feed line includes a tighter radius and cavitation venturi for flow mass flow-rate passive control. There were concerns that these configurations might generate a great flow distortion at the engine interface. Also both the pressure drop at the feed line and any presence of separation area are a great concern according to the propellant flow. To resolve these issues, a computational fluid dynamic analysis was conducted to determine the flow field in the LOX feed lines.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.141-144
• /
• 2003

This paper proposes an analytical model of off-line feed rate scheduling to obtain an optimum feed rate for high speed machining. Off-line feed rate scheduling is presented as an advanced technology to regulate cutting forces through change of feed per tooth, which directly affects variation of uncut chip thickness. In this paper, the feed rate scheduling model was developed using a mechanistic cutting force model using cutting-condition-independent coefficients. First, it was verified that cutting force coefficients are not changed with respect to cutting speed. Thus, the feed rate scheduling model using the cutting-condition-independent coefficients can be applied to set the proper feed rates for high speed machining as well as normal machining. Experimental results show that the developed fred rate scheduling model makes it possible to maintain the cutting force at a desired level during high speed machining.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.11-15
• /
• 2002

In this paper, we have proposed the new configuration of wideband antenna using CPW fred lines. The proposed antenna has CPW feed lines and U-slot to achieve wade bandwidth with good impedance matching. The use of CPW feed line can decrease the number of substrates. It is compared with the conventional antenna find by a microstrip fled line. The parameters of CPW fred lines were studied by using the quasi-static approximation which is based on the conformal mapping method. The analysis of CPW discontinuities such as the tapered-step structure and the open ended gap were studied by using the quasi-static approximation which is based on the boundary element method. Also, the equivalent circuit model of multi-layer antenna were proposed using the cavity model. Experiment results of the proposed antenna 7how wide-bandwidth characteristics and good radiation patterns in passband.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.37-42
• /
• 1997

Off-line feed rate scheduling is an advanced methodology to automatically determine optimum feed rates for the optimization of NC code. However, the present feed rate scheduling systems have lim~tations to generate the optimized NC codes because they use the material removal rate or non-generalized cutting force model. In this paper, a feed rate scheduling system based on an improved cutting force model that can predrct cutting forces exactly in general machining was presented. Original blocks of NC code were divided to small ones with the modified feed rates to adjust the peak value of cutting forces to a constant vale. The characteristic of acceleration and deceleration for a given machrne tool was considered when off-line feed rate scheduhng was performed. Software for the NC code optimization was developed and applied to pocket machining simulation.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.265-268
• /
• 2003

In this paper, we introduce the SIR typed bandpass filters in CPW structures for shifting spurious harmonic frequency into higher frequency band. And we proposed the effective feed structures for suppressing spurious frequency in the SIR typed CPW bandpass filters. The designed folded feed structures have lowpass filtering characteristic. They are very effective feed types in the CPW bandpass filters for suppressing harmonics. The measured results of the CPW bandpass filter with folded feed line shows that it has suppressed and wide out-of-band up to 5.8fo.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.580-583
• /
• 2007

In this paper, we proposed a slot antenna for dual band ISM that was transformed from a slot antenna structure. Proposed antenna was designed and fabricated that transformed feed line was changed existing slot antenna feed line to appear resonances at dual band. Bandwidth of the designed and fabricated slot antenna for ISM dual band is 8.23%, 4.8% at the resonated frequency at 2.45 GHz, 5 GHz. And we observed the resonant frequency and bandwidth according to change of feed line and slot length. Also, the measured radiation pattern characteristic of fabricated antenna is compared and analyzed E-plane and H-plane at 2.45 GHz, 5GHz.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.2
• /
• pp.21-26
• /
• 2005

From on the machining center cutting work of 5534, the characteristics such as spindle speed and feed speed fir the third point height, average spacing of roughness peaks, bearing ratio, center line average, ten point height. experiments is roughness for sampling length determine to measuring length of cutting feed speed 200, 400, 600, 800mm/min and spindle speed 800, 1000, 1200, 1400rpm. Third point height is spindle speed with most suitable cutting condition 1000rpm. Third point height is feed speed with most suitable cutting condition 400mm/min. Average spacing of roughness peaks are spindle speed with most suitable cutting condition feed speed increased to average spacing of roughness Peaks are increased. Spindle speed increased to average spacing of roughness peaks are decreased. Bearing ratio is spindle speed with feed speed increased to bearing ratio decreased. Center line average is spindle speed with most suitable cutting condition at 1200rpm feed speed with most suitable cutting condition at 200mm/min to cutting foe roughness suddenly decreased. Ten point height is spindle speed with most suitable cutting condition 1200rpm at ten point height cutting face roughness to decreased and feed speed with most suitable cutting condition 800mm/min at ten point height cutting face roughness to decreased.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.3-6
• /
• 2002

This paper presents the cutting simulation system for prediction and regulation of cutting force in CNC machining. The cutting simulation system includes geometric model, cutting force model, and off-line fred rate scheduling model. ME Z-map(Moving Edge node Z-map) is constructed for cutting configuration calculation. The cutting force models using cutting-condition-independent coefficients are developed for flat-end milling and ball-end milling. The off-line feed rate scheduling model is derived from the developed cutting force model. The scheduled feed rates are automatically added to a given set of NC code, which regulates the maximum resultant cutting force to the reference force preset by an operator. The cutting simulation system can be used as an effective tool for improvement of productivity in CNC machining.