• Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.255-259
• /
• 1998

This study was designed to evaluate the economic analysis of channel catfish production in 1998 based on fish value and total feed cost. Catfish received higher protein feeds with lesser amount based on the dietary protein levels, but received the constant total protein input for all treatments. Weight gain per pond for treatment 1 $(28\%\;protein,\;100\%\;of\;satiation)$ was higher (P<0.10) than for treatment 3 $(36\%\;protein,\;77.8\%\;of\;satiation)$, but not significantly higher than for treatment 2 $(32\%\;protein,\;87.5\%\;of\;satiation)$ at constant DE. At constant DE/P (treatments 4, 2 and 5), weight gain per pond for treatment 5 $(36\%\;protein,\;77.8\%\;of\;satiation)$ was lower (P<0.10) than for treatment 2, but not significantly lower than for treatment 4 $(28\%\;protein,\;100\%\;of\;satiation)$. At constant DE, feed conversion slightly improved as dietary protein level increased from $28\%\;to\;32\%$ and feed allowance decreased by $12.5\%$, but did not improve further as dietary protein level increased from $28\%\;to\;36\%$ and feed allowance decreased by $22.2\%$. At constant DE/P, feed conversion improved as dietary protein level increased from $28\%\;to\;32\%$ increased and feed allowance decreased by $12.5\%$, but did not improve as dietary protein level increased from $28\%\;to\;36\%$ and feed allowance decreased by $22.2\%$ Total feed cost for treatment 1 was slightly, but not significantly higher than for treatments 2 and 3 at constant DE. At constant DE/P, total feed cost for treatment 5 was higher (P<0.05) than for treatment 2, but not significantly higher than for treatment 4. Total value of fish ($ /ha) produced for treatment 1 was highest and lowest was for treatment 5. Return above feed cost was highest for treatment 1 and nearly the same as treatment 2. Return over feed cost for treatments 3 and 4 were slightly lower than for treatments 1 and 2. Economic analysis showed that feeding fish the diet containing $28\%$ protein and 3.08 kcal/g DE to satiation and the diet containing $32\%$ protein and 3.08 kcal/g DE to $87.5\%$ of satiation produced the highest profit to farmer.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.214-225
• /
• 2018

Rice straw is the principal forage for Korean cattle. Limited supply of domestic forage forces Korea to depend on imported forage. Utilizing locally available domestic feed as an alternative would lead to self-sufficiency and stability in cattle farm management. Locally available feed can be utilized as forage. The challenge of collecting local feed has been overcome by machines that have been developed to harvest feed. Local feed can be completely consumed in the production regions, thus reducing transportation costs and increasing price competitiveness. Hitherto, studies have focused on feed technologies and price competitiveness, among other factors, while the substitution of forage has not been examined. This study conducts a quantitative analysis to estimate the extent to which local feed can replace existing forage. We find that local feed is cheaper, and abundantly available, and can thus replace high-quality forage.

• Animal Bioscience
• /
• v.36 no.7
• /
• pp.1067-1074
• /
• 2023

Objective: Better feed efficiency can be achieved by selecting rabbit genotypes with lower residual feed intake (RFI) under high ambient temperatures. Methods: Two genotypes of rabbits (Jabali, Saudi local breed and imported, Spanish V-line) were used to derive RFI and to investigate the relationship between RFI and productive traits. In total, 250 animals (125 each) were housed in individual wire mesh cages in a semi-closed rabbitry. Growth performance, feed criteria, carcass evaluation, biochemical blood analysis, and immune responses were determined. Results: Superiority in growth performance, feed efficiency, carcass characteristics, and cellular immunity was recorded in the Jabali breed compared to the V-line genotype. According to regression analysis, a significant effect of daily body weight gain was found, upon computing the expected feed intake in both genotypes. Moreover, mid-body weight^0.75 had a significant effect only in the Jabali breed. Positive correlation coefficients between RFI and dry matter feed intake or feed conversion ratio were found. The same trend in this relationship between RFI and productive traits was observed in some cases for both genotypes. An opposite trend in correlations was observed in the studied genotypes for some traits. Conclusion: The results suggest that the relationship between RFI and productive traits must be taken into consideration in rabbit breeding programs under the prevailing environment. However, further studies are required to investigate the effect of rabbit genotype and environmental factors on computing RFI.

• Membrane and Water Treatment
• /
• v.9 no.6
• /
• pp.435-445
• /
• 2018

In this work, desalination experiments were performed on vacuum membrane distillation (VMD). Process parameters such as feed flow rate, vacuum degree on permeate side, feed bulk temperature and feed salt concentration were optimized using sensitivity analysis and Taguchi method. The optimum values of process parameters were found to be 2 lpm of feed flow rate, $60^{\circ}C$ of feed bulk temperature, 5.5 kPa of permeate-side pressure and 5000 ppm of salt concentration. The permeate flux at these conditions was obtained as $26.6kg/m^2{\cdot}hr$. The rejection of salt in permeate was found to be 99.7%. The percent contribution of various process parameters using ANOVA results indicated that the most important parameter is feed bulk temperature with its contribution of 95%. The ANOVA results indicate that the percent contribution of permeate pressure gets increased to 5.384% in the range of 2 to 7 kPa as compared to 0.045% in the range of 5.5 to 7 kPa.

• Journal of Welding and Joining
• /
• v.25 no.4
• /
• pp.49-57
• /
• 2007

The optimization of the cladding parameters was studied to maximize the deposition efficiency in the laser cladding using a low power pulsed Nd:YAG laser. STS304 stainless steel plate and Co alloy powder were used as a substrate and powder for cladding, respectively. The six cladding parameters were selected through preliminary experiments and their effects on the deposition efficiency were analyzed statistically. Experiments were designed and carried out using the Taguchi experimental method using a L18 orthogonal array. It was found from the results of analysis of variance(ANOVA) that the powder feed position and powder feed angle had the most significant effects on the deposition efficiency, but the powder feed rate and laser focal position had nearly no effects. The deposition efficiency could be maximized at 0mm of the powder feed position and 50o of the powder feed angle in the experimental range. From this experimental analysis, a new laser cladding head with 20o of the powder feed angle was designed and manufactured. With a new laser cladding head, the highest deposition efficiency of 12.2% could be obtained.

• Korean Journal of Poultry Science
• /
• v.8 no.1
• /
• pp.31-36
• /
• 1981

This study was conducted to investigate how much total feed cost can be curtailed by the application of linear programming compared with the conventional hand calculating method in determining the feed formula in feed mill. Data were collected from a feed mill producing 19 different kinds of feed and having capacity of producing 5,000 tons of feed a month. According to the results of analysis, the least-cost feed formulation by linear programming showed a decrease of 4,793,172 won monthly in total feed cost as compared with the conventional hand calculating method. But, to confirm the results of this study, it is necessary to conduct further emperical studies.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.181-192
• /
• 2015

The aim of this study is to obtain optimum process condition for using two tower distribution to recycle the waste Propylene Glycol Monomethyl Ether Acetate (PGMEA) that is formed after washing LCD. The optimum process condition for the content of PGMEA, which is dependent variable, at 1st distillation was calculated according to Bottom temperature (BTM temperature), Reflux amount, Feed amount, Feed temperatures, and the optimum process conditions and optimum factors for the content of PGMEA at 2nd distillation according to Bottom temperature (BTM temperature), Reflux amount, Feed amount, Feed temperatures. At 1st distillation, Reflux amount, Feed amount, and Feed temperature are significant variables. However, it is found that the BTM temperature range is not significant in the range of process condition used in this study. The optimum process conditions are based on $5700{\ell}$ of Feed amount, $2500{\ell}$ of Reflux amount, $165^{\circ}C$ of BTM temperature, and $130^{\circ}C$ of Feed temperature. For the this condition, the predicted content of PGMEA was calculated as 92.12~94.62%. Significant factors at 2nd distillation are Reflux amount, Feed amount, and BTM temperature. Multicollinearity is between Reflux amount and BTM temperature. BTM was omitted in the multiple regression equation because there is a strong positive correlation between Reflux amount and BTM temperature. Base on $199^{\circ}C$ of BTM temperature, The optimum process conditions are based on $4275{\ell}$ of Feed amount, $6200{\ell}$ of Reflux amount and $130^{\circ}C$ of Feed temperature. In this condition, the predicted content of PGMEA was calculated as 99.0~99.5%.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.55-61
• /
• 1985

In an attempt to compare the mash and pelleting costs, individual production costs of eash mash and pelleting are analyzed. For the analysis, Park's model (1982) are used. According to the results of the analysis, the following conclusions are made. 1. Total energy cost for pelleting is 4 times higher than that for mash feed production. 2. Labor cost for pelleting is 20 % higher than that of mash feed. 3. Capital requirements for pelleting feed mill is approximately 20 % higher than that for mash feed mill when feed mill size is 200 ton/day. 4. Total production cost for pelleting is from 30 % to 50 % higher than that for mash feed when mill size ranges from 100 ton/day to 400 ton/day.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.276-281
• /
• 2001

The KSR-III Main Propulsion System configuration of the liquid oxygen (LOX) feed line is analyzed. This feed line includes a tighter radius and cavitation venturi for flow mass flow-rate passive control. There were concerns that these configurations might generate a great flow distortion at the engine interface. Also both the pressure drop at the feed line and any presence of separation area are a great concern according to the propellant flow. To resolve these issues, a computational fluid dynamic analysis was conducted to determine the flow field in the LOX feed lines.

• Plant Journal
• /
• v.13 no.2
• /
• pp.39-45
• /
• 2017

This paper is a study on FEED validation model that can be used in the bidding stage of small utility equipment in offshore plant industry using system engineering technique. Currently, domestic marine plant equipment industry companies are faced with the financial risk of project execution as they enter marine plant. The major cause was the insufficient ability to verify the FEED output from the contractor (Engineering or Procurement and Construction) of the equipment manufacturer (COMPANY or EPC). Therefore, we propose FEED design verification method that simplifies the system engineering method that sequentially applies requirements analysis, function, performance analysis and physical architecture building process. Also, we verified the suitability of the developed model by comparing the results of applying the developed FEED verification model and the verification method that depends on the existing experience for the small utility equipment (Air Compressor).