• 천문학회보
• /
• 제37권1호
• /
• pp.72.2-72.2
• /
• 2012

We present the results of HI 21 cm line observations to explore the nature of the high-velocity (HV) HI gas at - 173${\circ}$, which appears as faint, wing-like, Hi emission that extends to velocities beyond those allowed by Galactic rotation in the low-resolution surveys. We designate this feature as Forbidden Velocity Wing (FVW) 172.8+1.5. Our high-resolution Arecibo HI observations show that FVW 172.8+1.5 is composed of knots, filaments, and ring-like structures distributed over an area of a few degrees in extent. These HV HI emission features are well correlated with the HII complex G173+1.5, which is composed of five Sharpless HII regions distributed along a radio continuum loop of size 4.4${\times}$3.4, or -138 pc ${\times}$ 107 pc, at a distance of 1.8 kpc. G173+1.5 is one of the largest star-forming regions in the outer Galaxy. The HV HI gas and the radio continuum loop seem to trace an expanding shell. Its derived HI parameters including large expansion velocity (55 km/s) imply the SNR interpretation. Hot xray emission is detected within the HII complex, which also supports its SNR origin. The FVW172.8+1.5 is most likely the products of a supernova explosion(s) within the HII complex, possibly in a cluster that triggered the formation of these HII regions.

• 환경영향평가
• /
• 제11권3호
• /
• pp.157-172
• /
• 2002

This work aims to collect a biogeographic informations on the biota, alpine ecosystem, nature reserves, forest ecosystem of North Korea, and also to accumulate a basic data on the current situation and problem of the natural ecosystem of North Korea for the preparation of future cooperation and exchange between South and North Koreas. The obtained findings are as follow. First, North Korean biota contains 18,013 species, and consists of 6,710 plant species, including 3,860 species of vascular plants. Secondly, urgent investigation on the biogeographically important arctic-alpine and alpine plants and ecosystem, those are known to be endangered due to environmental change and global warming, is required. Thirdly, the conservations of diverse nature in North Korea are conducted by the introduction of various systems, such as nature preservation region, reserves for plant, animal and sea bird, and natural monuments. Fourthly, out of 9.5 million hectares of forest, one million hectares have already faced forest denudation, thus caused lots of damages for forest ecosystem. Sharp decline of North Korean forest land are due mainly to the expansion of terraced dry-field farming and deforestation. Recovery of denudated forest land should be approached by both South and North Korean sides to solve the problem of shortage of foods and restoration of natural ecosystem of North Korea.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.390-395
• /
• 2009

The robustness of audio fingerprinting system in a noisy environment is a principal challenge in the area of content-based audio retrieval. The selected feature for the audio fingerprints must be robust in a noisy environment and the computational complexity of the searching algorithm must be low enough to be executed in real-time. The audio fingerprint proposed by Philips uses expanded hash table lookup to compensate errors introduced by noise. The expanded hash table lookup increases the searching complexity by a factor of 33 times the degree of expansion defined by the hamming distance. We propose a new method to improve noise robustness of audio fingerprinting in noise environment using predominant pitch which reduces the bit error of created hash values. The sub-fingerprint of our approach method is computed in each time frames of audio. The time frame is transformed into the frequency domain using FFT. The obtained audio spectrum is divided into 33 critical bands. Finally, the 32-bit hash value is computed by difference of each bands of energy. And only store bits near predominant pitch. Predominant pitches are extracted in each time frames of audio. The extraction process consists of harmonic enhancement, harmonic summation and selecting a band among critical bands.

• 복식
• /
• 제65권4호
• /
• pp.19-30
• /
• 2015

In recent years, various studies about 'Biomorphic design' have been conducted and accelerated among many recent design concepts and methodology. Therefore, this study classifies the types of biomorphic fashion design based on literature review, and select biomorphic fashion designs in the latest fashion designer's collection. This study aimed to determine the types and characteristics of the biomorphic design in fashion design, and analyze the characteristics and the interpreted intrinsic meanings through Greimas Semiotic rectangle model based on the Binary-Opposition of meaning and Isotophy. As the result of analysis, biomorphic designs in fashion are classified as three types: 'representational imitation of form', 'technical imitation of functional features', and 'imitation of symbolic attribute'. 'Representational imitation of form' was derived from an organic design through atypical forms, repetition and extension of figurative forms of nature, and 'the functionalities of the nature' are interpreted as the feature to maintain the condition of the life itself and to attempt to regulate the status of self-autonomy. Lastly, 'the imitation of symbolic attributes' is designing the process of creation, growth, expansion and destruction from circulation of nature.

• 한국실내디자인학회논문집
• /
• 제19권3호
• /
• pp.22-29
• /
• 2010

Recent days, transition to ecological thought is being accelerating by environmental impact with a sustainable development. This symptom is no exception in architecture area. So is vernacular design affecting on modern architecture in many ways in terms of economical aspect and eco-friendly environment as well. Natural energy like solar power, environment, and terrestrial heat that applied in vernacular architecture is also widely accepted in name of 'sustainable energy' of which a design applied with ventilation and airing of natural wind is very useful & pragmatic in terms of economical reason. Accordingly, this study examined a relation between vernacular architecture and natural wind and compared it with traditional type and its feature of ventilation & airing. Ventilation & airing applied in the past can be divided into three categories: methods by convection, natural element, and architectural type. All these methods gave some pleasant felling indoors when there were no artificial energies. Even in modern age, such a ventilation & airing is being used with traditional type in different variety of materials, and it will be developed with modern technology without any extra cost in terms of sustainable expansion, and opened for further researches.

• 설비공학논문집
• /
• 제9권1호
• /
• pp.82-91
• /
• 1997

R-410a and R-407c witch have the best potential among the substances being considered as R-22 alternatives were tested as "drop in" refrigerants against a set R-22 baseline tests for comparison. The performance evaluations were carried out in a psychrometric calorimeter test facility using the residential split-type air conditioner under the ARI rating conditions. Other than the use of different lubricant and a hand-operated expansion valve, one of the commercial systems was selected for the experiment. Performance characteristics were measured; compressor power, capacity, VCR, mass flow rate and COP. The tests showed that R-407c can be directly applied to the existing refrigeration system because of its similar vapor pressure and other thermopysical properties with those of R-22. However, it required change to the volume flow rate of compressor in order to achieve the similar performance with R-22 because of its relatively small VCR and capacity. Meanwhile, R-410a has too high a vapor pressure to be applied to the existing system and this feature results in relatively low COP of the system compared to that of R-22. But this could be improved by changing compressor design considering R-410a's relatively high VCR and capacity compared to those of R-22.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.217-222
• /
• 2005

The considerable increase of the elderly with dementia is expected annually and when we think about the family members' and the patients' suffering, it could be painful. Above all things, it imposes heavy economic burdens on the family members that have patients who suffer from diseases of age like dementia or paralysis that caring them at home and also, it is not desirable for those old people in point of physical or environmental circumstances for medical care. Thus, it is needed urgently that the expansion of specified facilities and improvement of services for these old people. Under this present condition, it is the special feature that the subject of research is people/facilities that offer services, not the elderly with dementia-the main user of those facilities. Thus, it is the time that we need various accessing plans that can grasp the patiences' activities and specialties and solve these problems in view of designing interior space. So, I tried to make designs that manage the elderly with dementia effectively and adequate to run facilities with considerations on the state of domestic specialized long-term care facilities for the elderly with dementia and researched guiding principles on physical healing surroundings with analysis that focused on the patients' activities, especially.

• 한국항해항만학회지
• /
• 제26권3호
• /
• pp.345-354
• /
• 2002

8-9세기는 무슬림 상인의 주도로 페르시아만에서 남중국까지의 해로가 활성화되는 시기이다. 동서교류에서 해로가 육로를 능가하는 이 시기에는, 이 간선 해로를 따라 그 동단인 동아시아해역과 그 서단인 지중해 해역이 설정되었다. 먼저 간선 해로에 관해, 기존 연구에서 미진하게 검토한 페르시아만에서 인도 동쪽 바다까지의 왕복 항로와 아랍선박을 검토하였으며 심해항행이 진행되었다는 것을 지적하였다. 다음으로 이 시기에 동아시아해역의 해상무역이 장보고의 활약으로 활성화되었던 것과는 달리, 지중해 해역은 로마제국 시대의 활기를 잃고 상대적으로 위축되어 있다는 것을 지적하였다.

• 한국실내디자인학회논문집
• /
• 제14권4호
• /
• pp.70-78
• /
• 2005

The considerable increase of the elderly with dementia is expected annually and when we think about the family members' and the patients' suffering, it could be painful. Above all things, it imposes heavy economic burdens on the family members that have patients who suffer from diseases of age like dementia or paralysis that caring them at home and also, it is not desirable for those old people in point of physical or environmental circumstances for medical care. Thus, it is needed urgently that the expansion of specified facilities and improvement of services for these old people. Under this present condition, it is the special feature that the subject of research is people/facilities that offer services, not the elderly with dementia-the main user of those facilities. Thus, it is the time that we need various accessing plans that can grasp the patiences' activities and specialties and solve these problems in view of designing interior space. So, I tried to make designs that manage the elderly with dementia effectively and adequate to run facilities with considerations on the state of domestic specialized long-term care facilities for the elderly with dementia and researched guiding principles on physical healing surroundings with analysis that focused on the patients' activities, especially.

• Advances in aircraft and spacecraft science
• /
• 제5권3호
• /
• pp.295-318
• /
• 2018

This research studies thermo-elastic behavior of rotating micro discs that are employed in various micro devices such as micro gas turbines. It is assumed that material is functionally graded with a variable profile thickness, density, shear modulus and thermal expansion in terms of radius of micro disc and as a power law function. Boundary condition is considered fixed-free with uniform thermal loading and elastic field is symmetric. Using incompressible material's constitutive equation, we extract governing differential equation of four orders; to solution this equation, we utilize general differential quadrature (GDQ) method and the results are schematically pictured. The obtained result in a particular case is compared with another work and coincidence of results is shown. We will find out that surface effect tends to split micro disc's area to compressive and tensile while nonlocal parameter tries to converge different behaviors with each other; this convergence feature make FGIMs capable to resist in high temperature and so in terms of thermo-elastic behavior we can suggest, using FGIMs in micro devices such as micro turbines (under glass transition temperature).