• Environmental and Resource Economics Review
• /
• v.15 no.4
• /
• pp.693-712
• /
• 2006

A pre-feasibility test is done for renewable energy hybrid power systems at off~grid islands in which the current power supply is provided only by diesel generation. We apply Homer (Hybrid Optimization Model for Electric Renewables) which was developed by the National Renewable Energy Laboratory (NREL) for the analysis to identify the cost-minimizing combination of power generating facilities for the given load profiles. Chuja-Do, Geomun-Do and Youngsan-Do have been selected for our analysis considering the wind resources data of the Korea Institute of Energy Research (KIER). Information on wind speed, solar radiation and temperature is also used for the analysis. System component cost information from overseas market has been used due to the lack of domestic information. Site specific Load profile for electricity demand for those islands are reconstructed based on the partial survey results obtained form other sources. The LCOE of the least cost hybrid power systems for Chuja-Do, Geomun-Do and Youngsan-Do are $0.278/kWh, $0.234/kWh and $0.353/kWh, respectively Considering the fact that diesel generation is being subsidized at the price of $0.300/kWh by the government, first 2 cases are economically feasible for the introduction of renewable energy hybrid systems to those islands. But the third case of Youngsan-Do does not meet the criteria. The basic differences of these pre-feasibility test results are from the differences of the site specific renewable energy conditions, especially wind resources. In summary, promoting hybrid systems in the off-grid remote island should be based on the economic feasibility test results. Not all the off-grid islands are feasible for introducing this renewable energy hybrid system.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.5
• /
• pp.219-225
• /
• 2013

This work examines the feasibility for estimating existing tensile stress on a stressed wire using the permeability of magnetic flux. A closed magnetic circuit has been constructed to induce magnetic flux inside a steel wire. With different tension stress levels on a wire, the permeability of magnetic flux on the wire has been measured. Two different experimental case studies have been conducted for the examination of sensitivity of permeability of magnetic flux on the stressed wire. One is a varying-length stress test, and the other is a fixed-length stress test. The results show that the permeability of magnetic flux in the varying-length stress test is inversely proportional to the applied stress, while the permeability in the fixed-length stress test is linearly proportional to the applied stress on the stressed wire. It is thus expected that the permeability of magnetic flux on a wire can be a promising indicator for the inspection of its tensile stress.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.6
• /
• pp.29-34
• /
• 2018

In this research, regarding the cement supplied to ready mixed concrete plant, the feasibility of rapid acquisition test for cement fineness using hydrometer which used for early strength evaluation of concrete was analyzed. Additionally, regarding the rapid test with hydrometer control factors were provided. As a result of analysis, quality control using hydrometer was possible with the regressive equation obtained in five minute between density of suspension and fineness of cement powder. As the control factors, dispersing admixture, replacing kerosene as a medium, and temperature of cement and water were evaluated. According to the control factor evaluation, the tap water was optimum as a medium and calibration of keeping the temperature of water to $20^{\circ}C$ or correction factor was needed for density results. Finally, it is considered that the suggested rapid quality evaluation method using hydrometer is cheaper and easier method than currently used Blaine test.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.31-36
• /
• 2001

As a part of micro engine development feasibility estimation was done through fabrication and test of down scaled combustor and MEMS fabricated spark electrode. In an experimental observation of the down scaled combustion phenomena where flame propagation was observed by optical method and pressure change in combustor which gives the information about the reaction generated thermal energy was recorded and analyzed. Optimal combustor scale was derived to be about 2mm considering increased heat loss effect and thermal energy generation capability. Through the fabrication and discharge test of MEMS electrode effects of electrode width and gap was investigated. Electrode was fabricated by thick PR mold and electroplating. From the result discharge voltage characteristic in sub millimeter scale electrode having thickness of $40{\mu}m$ was obtained. From the result base technology for design and fabrication of micro engine was obtained.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1658-1663
• /
• 2004

The feasibility test was performed to check the possibility of 2-phase flow visualization and water distribution at inside the PEMFC using neutron radiography image technique. It was composed using water and pressured air. From the image, several 2-phase flow patterns were discovered and water fraction was estimated by the reference specimen and image analysis.

• Journal of the Korean Society of Visualization
• /
• v.8 no.2
• /
• pp.45-50
• /
• 2010

The objective of this study is to elucidate the feasibility of synchrotron X-ray micro CT as a non-destructive imaging method to visualize the three-dimensional morphological structures of biological and non-biological samples. The experiments were conducted in 7B2 X-ray micro CT beamline in Pohang Accelerate Laboratory (PAL). A rotational 3-axis stage was specially designed for $0^{\circ}-180^{\circ}$ scanning of test samples. Preliminary tests were performed for opaque samples including a mosquito head, a plant seed and gas diffusion layer (GDL) of polymer electrolyte fuel cell to verify the feasibility of the X-ray micro CT. It visualized clearly the internal structure of all the test samples, supporting its usefulness.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.1
• /
• pp.92-98
• /
• 2008

The flame image observation and analysis has been investigated for combustion monitoring and management of the pulverized coal firing for thermal power plant, especially for lower nitrogen oxide generation and safer operation. We aimed at obtaining the relationship between burner flame image information and emissions of nitrogen oxide and unburned carbon in furnace utilizing the flame image processing methods, by which we quantitatively determine the conditions of combustion on the individual homers. Its feasibility test was undertaken with Samchonpo thermal power plant #4 unit which has 24 burners, through which the system was observed to be effective for evaluating the combustion conditions and continuous monitoring to prevent future loss of ignition.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.5
• /
• pp.709-717
• /
• 2006

This research was conducted to figure out the feasibility of several sorption materials to treat various pollutants in road runoff. In advance of the major feasibility test with various sorption materials, the separation process with $1.2{\mu}m$ filter was conducted and showed that slight portion of pollutants was removed(Orgamic pollutant - 20%, Nutrient salt - 50%, Heavy metals - 0~30%). To remove dissolved pollutants in runoff, various materials were tested through an isotherm sorption experiment. As a result, GAC showed most effective material among them to lessen most contaminants such as organic compounds and nutrients. On the other hand, ion-exchange resin and Zeolite showed limited usefulness on the some heavy metals. Freundlich model was most suitable for the current experiment data, and the amount of adsorbent (GAC) could calculated based on this model.

• Korea Journal of Hospital Management
• /
• v.4 no.1
• /
• pp.66-95
• /
• 1999

This study was conducted to analyze the medical charges of the elderly dementia inpatients, to identity their characteristics, and there by to evaluate feasibility of the per diem payment system for the patients. Data on medical charges of the patients were collected from the National Federation of Medical Insurance and sample hospitals from October through December 1997. The data were analysed in order to find the characteristics and test hypotheses postulated. The results are summarized as follows; Firstly, there was no difference statistically in between disease groups and between the dementia inpatients belonging to each disease group. Secondly, the amount of the non-insurance medical charges of the elderly dementia inpatients is considerably high compared to the insurance medical charges paid by the patient, which implies that some measures are to be prepared by the Government. Finally, medical charges per inpatient day of the dementia patients are not different statiscally by sex, by age group, and by disease group. This result supports the feasibility of the per diem payment system for the elderly dementia inpatients.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.6
• /
• pp.146-155
• /
• 2016

The field feasibility tests for a phytoextraction process were performed to identify the effect of citric acid as a chelate on the uranium (U) transfer into the plant for the naturally U contaminated soil in Duckpyeongri, Korea. For the feasibility tests, lettuce and Chinese cabbage were cultivated for 49 days on four testing grounds ($1m{\times}1m{\times}0.5m$ in each) in 2016. The citric acid solution was added to two testing grounds (one for lettuce and the other for Chinese cabbage) increasing the U transfer in two crop plants and their results were compared to those without the citric acid solution. When without the citric acid solution, the U concentration of plant after the cultivation was low (< $45{\mu}g/kg$ for leaves and < $450{\mu}g/kg$ for roots). However, with the addition of 50 mM citric acid solution, the U concentration of lettuce leaves and roots increased by 24 times and 1.8 times, and the U concentration of Chinese cabbage leaves and roots increased by 86.7 times and 5.4 times. The absolute accumulated U amount (${\mu}g$) in lettuce and Chinese cabbage also increased by 8.7 times and 50 times, compared to those without citric acid solution. Less than 8% of the U amount of exchangeable/carbonate phases was removed by using the lettuce and Chinese cabbage when the citric acid solution was not applied. However 52% and 66% of the U amount in exchangeable/carbonate phases were removed by the lettuce and the Chinese cabbage when the citric acid solution was added. The effect of the citric acid on the U transfer capability into the plants was quantitatively investigated by the field feasibility test, suggesting that U existing as exchangeable/carbonate phase in soil can be successfully removed by the phytoextraction process using Chinese cabbage with citric acid.