• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.59-65
• /
• 1997

The calibration of O.M.D is carried out experimentally and is analysed theoretically. O.M.D experimentally measures the change in optical density of artificially contaminated oil which contains Fe powder of 5, 10, 20, 30, 40, 50, 70, 100, 200 ppm. The change in optical density, D$_1$ means the logarithmic transmittance of I$_0$ over $I_1 D_2$ denotes the logarithmic transmittance I$_2$ over I$_1$ on electromagnetic force which arranges the ferrous particles along the line of magnetic force. The theoretical D$_1$ which increases linearly as increasing Fe concentrations, is analysed by light attenuation theory. The difference between theoretical D$_1$ and experimental D$_1$ is due to the attenuation of micro bubbles and the agglomeration of fine particles in the sample oil. The calibrated O.M.D is applied to the sample oil from the high-powered diesel engine. Also the results are compared with those out of the off-line techniques such as JOAP and ICP.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.9
• /
• pp.963-968
• /
• 2008

A new method to deal with GPS indoor positioning by means of time synchronized switching GPS repeater has been developed by authors[1]. But the developed indoor positioning system has problems. Therefore, we proposed a method for indoor positioning using GNSS Repeater-Assisted. To solve the 3-dimensional user's position, the 4 or more retransmission antennas are needed in the previously proposed methods. If a GPS repeater periodically transmits the signal like as pseudollite, the information for assisting an acquisition and tracking can be informed to receiver. Then, the user position can be calculated using the induced weak signal. The advantage of the proposed algorithm is use of only 1 re-transmission antenna because the re-transmitted signal are not used for positioning but used for assisting an acquisition and tracking weak signals induced indoor. We analyze the propose algorithms through the experiment and performed the test of feasibility.

• Journal of the Korean Society of Safety
• /
• v.5 no.1
• /
• pp.49-55
• /
• 1990

A comprehensive cycle simulation was developed to predict the performance of gasoline engine including intake and exhaust systems with variation of operating conditions and design factors. In this study, the gas exchange model, compression and expansion model, two-zone combustion model and heat transfer model were used. In order to confirm the feasibility of the simulation program, the calculated results were compared with experimental results. P-$\theta$ diagrams, I. M. E. P. and S. F. C by means of calculation showed acceptable quantitative agreement with the experimental data. Therefore, this program is particularly well adapted to indicating the direction of the optimal design and optimal operating conditions for gasoline engine.

• International Journal of Costume and Fashion
• /
• v.15 no.2
• /
• pp.63-77
• /
• 2015

By means of statistical analysis and module concept, this paper investigated the current situation of high school girl's uniform and put forward its improved design and database establishment. Combined with the survey data, the future design direction and trend of the high school girls' uniform were proposed. By using modular design concept, the uniform is divided into five modules, and a style database has been built. Meanwhile, the parametric pattern database has been completed by using garment CAD system, based on the style database above, which has 42,336 possibilities to assemble a pair of school uniform. Combining with digital sewing techniques and by using computerized embroidery machine, the personalized design of high school girl's summer uniform has been realized. And two simulated case have been given for examples to prove its feasibility. The idea of modular design and parametric design method proposed in this study offer references for establishing the modular design database and parametric pattern database for other types of school uniform and are of relatively high practical and theoretical value.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1124-1128
• /
• 2008

Thin-wall injection molding is associated with many advantages, including increased portability, the conserving of materials, and the reduction of the molding cycle times. In the application of the thin-wall molding, a considerable reduction of the effective flow thickness results in filling difficulty. High-frequency induction is an efficient way to overcome this filling difficulty by means of heating the mold surface by electromagnetic induction. The present study applies the induction heating to the injection molding of thinwalled micro structures with high aspect ratio. The feasibility of the proposed heating method is investigated through a numerical analysis. The estimated filling characteristics of the micro-features are investigated with variations of mold temperature and part thickness, of which results are also compared with experimental measurements.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.9
• /
• pp.347-354
• /
• 1984

This paper presents a method of improving the power factor and , the waveform of A.C line currents and the output waveforms of AC to DC fully bridge converter systems which is achieved by connecting CON I.II and CON III.IV in series and parallel. The basic principle of the CON I.II.III.IV's operation is simple and feasibility of thease converter is proved by experiments. CON I and CON III are constructed of natural commutation, CON II and CON IV are constructed of forced commutation. The experimental results show that the power factor and waveform of the source currents and the output waveforms are improved by the method of connecting converter in series and parallel and driving it in I, II, III, IV quadrant.

• Journal of the Korea Furniture Society
• /
• v.21 no.3
• /
• pp.248-252
• /
• 2010

This study is carried out to introduce the concept of Kagome structure as the new trial for the furniture design and the feasibility of its utilization in furniture industry. Kagome means originally the two dimensional bamboo-basket woven pattern that is composed of interlaced triangles whose lattice points each have four neighboring points, which was used in traditional bamboo craft design like 'Jukbuin(bamboo-wife)'. Its unique truss structure has been widely used by many kinds of the domain of science and engineering in mechanical and architectural industry with some merits, i,e, material utilization efficiency and robust strength. Here we tried to introduce two dimensional and three dimensional form of Kagome which are supposed to be a furniture design elements. Authors think these Kagome design could be realized with domestic lumber of inferior properties. Both of them would be used as a decorative element or mechanical supporter in furniture design.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.5
• /
• pp.119-131
• /
• 2006

This paper proposes a mathematical model for web site service quality evaluation, which first applies analytic hierarchy process(AHP) to determine the weights of evaluation indexes of web site service quality and then analyzes web site service synthetically by means of fuzzy methodology. In this case, experts' knowledge cannot only be used but its subjective component can be eliminated. Hence, the web site service quality can be analyzed and evaluated more reasonably. After establishing this model, the experiment results will be given, which verify the feasibility and validity of the proposed model. The model proposed here is very simple and easy to implement and can provide a useful way to help developers evaluate their web site service quality efficiently.

• Korean Journal of Microbiology
• /
• v.13 no.2
• /
• pp.64-70
• /
• 1975

As a serial experiment of radiosterilization of medical products, we investigated the feasibility of using gamma ray to sterilize antibiotics, tetracycline HCl. Tetracycline HCl in aqueous solution and dried state irradiated with several dose levels was assayed for physico-chemical properties by checking UV absorption spectra, paper chromatogrph. IR spectra and NMR sepctra, and antibiotic activities by [means of agar plaque technique and tube $d_1$]ution method. In physico-chemical propertis and biological activities, the teracycline HCl in dried state remained radioresistant up to exposure of 10 Mrad, however, in aqueous solution, the dose of 300 Krad produced a significant inactivation. From the results of this study, radiosterilization of tetracycline HCl is more recommendable in the dried state than in aqueous solution.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.8
• /
• pp.1457-1471
• /
• 2011

A method to detect Trojan horses in messaging and Bluetooth in mobile phones by means of monitoring the events produced by the infections is presented in this paper. The structure of the detection approach is split into two modules: the first is the Monitoring module which controls connection requests and sent/received files, and the second is the Graphical User module which shows messages and, under suspicious situations, reports the user about a possible malware. Prototypes have been implemented on different mobile operating systems to test its feasibility on real cellphone malware. Experimental results are shown to be promising since this approach effectively detects various known malware.