• Steel and Composite Structures
• /
• v.50 no.3
• /
• pp.319-336
• /
• 2024

Ultra-high-performance concrete (UHPC) has attracted increasing attention in prefabricated steel-concrete composite beams as achieving the onsite construction time savings and structural performance improvement. The inferior replacement and removal efficiency of conventional prefabricated steel-UHPC composite beams (PSUCBs) has thwarted its sustainable applications because of the widely used welded-connectors. Single embedded nut bolted shear connectors (SENBs) have recently introduced as an attempt to enhance demountability of PSUCBs. An in-depth exploration of the mechanical behavior of SENBs in UHPC is necessary to evidence feasibilities of corresponding PSUCBs. However, existing research has been limited to SENB arrangement impacts and lacked considerations on SENB geometric configuration counterparts. To this end, this paper performed twenty push-out tests and theoretical analyses on the shear performance and design recommendation of SENBs. Key test parameters comprised the diameter and grade of SENBs, degree and sequence of pretension, concrete casting method and connector type. Test results indicated that both diameters and grades of bolts exerted remarkable impacts on the SENB shear performance with respect to the shear and frictional responses. Also, there was limited influence of the bolt preload degrees on the shear capacity and ductility of SENBs, but non-negligible contributions to their corresponding frictional resistance and initial shear stiffness. Moreover, inverse pretension sequences or monolithic cast slabs presented slight improvements in the ultimate shear and slip capacity. Finally, design-oriented models with higher accuracy were introduced for predictions of the ultimate shear resistance and load-slip relationship of SENBs in PSUCBs.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.4
• /
• pp.48-59
• /
• 2012

Gangform, compared to the traditional forms, is a systemized form which can reduce construction duration and cost by the advantage of using it repeatedly. However, transportation and climbing process of the Gangform is highly dependant on the performance of tower crane. Gangform climbing process takes one day out of six to seven days of a structural work cycle. Tower cranes can not be used in other lifting works when they lift the Gangform during the structural work cycle, causing the delay in the construction project. Numerous efforts and researches have been done in domestic and international industry to solve such limitations of Gangform climbing process. Especially, "A Study on the Development of Automatic Gangform Climbing System for Apartment Housing Construction"has suggested a conceptual model which can climb the Gangform system without a tower crane. In this paper, the technical and economical feasibilities of previously proposed Automatic Gangform climbing system are examined by evaluating its structural stability and lifting load reduction effect.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.217-222
• /
• 1985

The yield responses of three isogenic lines in plant type of paddy rice(open-, spread- and broom-type) as affected by combined treatments of transplanting densities (47.62, 22.22, 15.15, 11.11 and 8.33 hills per sq. meter) and rates of fertilizer application (0, 0.5, 1.0 and 1.5 folds of standard rate) were studied by using of the partial differentiations by planting density(D):df(D,F)/dD, fertilizer rate(F):df(D,F)/dF, and their interaction(DXF):d$^2$ f(D,F)/dDdF from the multiple regression polynominal equations. Under the condition of wider planting, the broom-type showed most prominent and sensitive responses in yield among others. Also the action of transplanting density in the broom-type were positive both at lower and higher densities. Under the lower densities, the broom-type represented positive actions both at lower and higher rates of fertilizer application. Whereas the interactions between the density and fertilizer rate under the lower densities were rather negative. To achieve the labor-saving by lower transplanting density(11-14 hills per sq. meter), the amount of fertilizer rates were estimated as 1.3-1.5 folds much of the standard in the open-type, whereas more than 1.5 folds in the broom-type. Thus, the potentials to absorb more amounts of fertilizer may explain the compensating function of the broom-type for equivalent yields of the standards at reduced transplanting densities.

• International Journal of Highway Engineering
• /
• v.18 no.4
• /
• pp.19-28
• /
• 2016

PURPOSES : Long-life asphalt pavements are used widely in developed countries. In order to be able to devise an effective maintenance strategy for such pavements, in this study, we evaluated the performance of the long-life asphalt pavements constructed along the national highways in South Korea. Further, an economic evaluation of the long-life asphalt pavements was performed based on a life-cycle cost analysis. We aimed to devise a model for evaluating the performance of long-life asphalt pavements using the national highway pavement management system (PMS) database as well as for analyzing the economic feasibility of such pavements, in order to promote their use in South Korea. METHODS : The maintenance history and pavement performance data were obtained from the national highway PMS database. The pavement performances for a total of 292 sections of 10 lanes (5 northbound lanes and 5 eastbound lanes) of national highways were used in this study. Models to predict the performances of hot mix asphalt (HMA) and long-life asphalt pavements under two distinct traffic conditions were developed using a simple regression method. Further, the economic feasibility of long-life asphalt pavements was evaluated using the Korea Pavement Management System (KoPMS). RESULTS : We developed service-life prediction models based on the traffic volume and the equivalent of single-axle load and found that long-life asphalt pavements have service lives 50% longer than those of HMA pavements. Further, the results of the economic analysis showed that long-life asphalt pavements are superior in terms of various economic indexes, including user cost, delay cost, total cost, and user benefits, even though their maintenance cost is higher than that of HMA pavements. A comparison of the economic feasibilities of the various groups showed that group A is superior to HMA pavements in all aspects except in terms of the maintenance criterion (crack 20% or higher) as per the NPV index. However, the long-life asphalt pavements in group B were superior in terms of the maintenance criterion (crack 25% or higher) regardless of the economic feasibility. CONCLUSIONS : The service life of long-life asphalt pavements was found to be approximately 50% longer than that of HMA pavements, regardless of the traffic volume characteristics. The economic feasibility of long-life asphalt pavements was evaluated based on the KoPMS. The results of the economic analysis were the following: long-life asphalt pavements are exceptional in terms of almost all factors, such as user cost, delay cost, total cost, and user benefit; however, the exception is the maintenance cost. Further, the economic feasibility of the long-life asphalt pavements in group B was found to be better than that of the HMA pavements (crack 25% or higher).

• Korea Journal of Hospital Management
• /
• v.5 no.1
• /
• pp.129-155
• /
• 2000

This empirical study, activity-based costing, a newly introduced approach that has proved to be an improvement over the conventional costing system in product or service costing, is applied at department of clinical pathology in K university hospital. The study subjects were 233 test procedures done in clinical laboratory of K university hospital. Activity analysis was done by interview, questionnaires, and time study, and the amount of resources consumed by each activity and their costs are then traced and applied to the laboratory tests. The main purpose of this study were to compare the test costs of activity-bases costing with those of conventional costing, and test fees of medical insurance, and to provide accurate cost informations for the decision makers of hospital. The major findings of this study were as belows. 1. The cost drivers for application of activity-based costing at clinical laboratory were cases of sample collection, case of specimen, cases of test, and volume-related allocation bases such as direct labor hours and total revenue of each test. 2. The profits of each clinical laboratory fields analyzed by conventional costing were different from the profits analyzed by activity-based costing, especially in the field of Urinalysis(approximately over estimated 750%). 3. The standard full costs by conventional costing were quite different from the costs computed by using activity-based costing, and the difference is most significant with the tests of long labor time. 4. From the comparison between costs computed by using activity-based costing and medical insurance fees, some test fees were significantly lower than the costs, especially in the non-automated fields. As described in this study, activity-based costing provides more accurate cost information than does conventional costing system. The former approach is especially important in the health care industry including hospitals in which planning and controlling the costs services provided are the key to maintaining a healthy financial status for the organization. Despite the contribution of activity-based costing the economic as well as technical feasibilities of implementing such a cost accounting system in an organization must be evaluated. In the development of activity-based costing systems, an activity analysis has to be conducted to identify activities that consume resources. This involves a detailed study of the organization's logistics and accounting information systems, and it is an expensive project in itself. Besides, it can be quite difficult and time consuming to identify and trace resource consumption to a specific activity. Thus the activity-based costing system should be implemented only when the decrease in cost of error far exceeds the increase in cost of measurement. By combining activity-based costing with standard costing, health care administrators can better plan and control the costs of health services provided while ensuring that the organization's bottom line is healthy.

• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.303-312
• /
• 2006

The main objective of this experimental study is to examine the feasibilities of each testing method with various kinds of grip systems for the analysis of tensile strength of GFRP(glass fiber reinforced polymer) reinforcing bars. Three types of grip systems were examined such as resin-sleeved pipe-type grip proposed by CSA(Canadian Standard Association), frictional resistance type metal grip by ASTM(American Standard for Testing and Materials) and wedge-inserted cone-type grip normally used in prestressing tendons. Also, mechanical properties of GFRP rebars with different surface deformations were investigated for each different type of testing grip used in this study. All testing procedures including specimens preparation, set-up of test equipments and measuring devices were made according to the CSA S806-02 recommendations. From the test results, it was found that the highest tensile strengths of GFRP rebars were observed when tested by resin-sleeved grip system regardless of their different surface deformations. But tensile strengths of GFRP rebars by ASTM grip system are only 10% less than those by CSA grip system. On the other hand, CSA grip is not only difficult to prepare but also not disposable. Therefore, ASTM grip system is recommended as a practical alternative to estimate the tensile strength of GFRP rebars.

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.393-405
• /
• 1983

The demand for livestock and poultry products including beef, pork, chicken, egg and milk whose income elasticities are relatively higher than other staple foods, has been increased significantly during the past two decades in response to the remarkable increase in per capita GNP. This trend will be continued during the fifth and the sixth five year economic development plan period beginning with 1982. The annual GNP growth rate will be 7.5% on the average during the next 10 years. It is greatly needed to estimate the demand for beef, pork, chicken egg and milk and to study the feasibilities of domestic production of livestock products for the formulation of adequate policies in order to equate the consumption and the production during the 1980s. So this study reviewed the possible changes in the food consumption patterns during the 1980s, estimated the demand for beef, pork, chicken, egg and milk by using empirical demand functions and finally made suggestions for the formulation of long term price stabilization policies for each livestock, poultry and dairy products through the equilibrium of the quantity of demand for and supply of the products. There are many factors affecting the demand for meats, but this study considered own price, prices of supplements and substitutes and per capita income as the independent variables in the demand equations. It was found that it's own price and income were most significantly affecting factors among others and the degree of substitution effects were remarkably different among the products. According to the meat demand derived in this study, per capita consumption of beef, pork and chicken in the base year 1982 was 11.2kg for total meat, 2.5kg beef, 6.0kg pork and 2.5kg chicken, 106 pieces egg, 15.1kg milk respectively, while those in 1991 were 19.3kg for total meat, 4.8kg beef, 9.6kg pork, 4.9kg chicken, 133pieces egg and 44.1kg milk. It is also predicted through this study that, when the level of production costs be maintained, the domestic production of pork and chicken will meet the demand for them during the fifth and sixth five year economic plan period. However, there will be chronic shortage of beef supply during the coming years. The annual import requirement will be 30,000tons to 40,000tons during the period. In order to stabilize the domestic livestock and poultry and dairy products market, the government should introduce measures to curb the increase in beef consumption by encouraging the consumption of pork and chicken. For this, the livestock production policy measures should be concentrated on : 1) the improvement of infrastructures of beef production by introducing advanced feeding and management technology, subsidies for the establishment of facilities and price support programs for farmers : 2) the development of dairy beef : 3) the reinforcement of the forecast systems for pork and chicken production and consumption.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.18-24
• /
• 2020

The purpose of this study is to validate thermal hinderance effects, i.e., feasibilities, of fire-proof structure for LPG tank exposed to fire from adjacent burning building. The panel materials suggested for the fire-proof structure are (1) 10 mm-thick wood, (2) wood with fireproof coating, (3) 75 mm-thick Expanded Polystyrene, (4) 75 mm-thick glass wool filled sandwich panel, and (5) 75 mm-thick autoclaved lightweight concrete. The square planar fire source of 1 ㎡, a matrix of nozzles releasing 120-140 g/s of LPG, is used to heat up the wall and the tank beyond, mimicking heat transfer from burning exterior wall finishes. The feasibility is tested by inspecting structural integrity after test, and then by examining temperatures at both sides of panels and tank's front surface as well as heat fluxes. As a result, it can be concluded that, among the suggested sample materials, fire-proof wall with ALC panel only showed the feasibility for explosion prevention with the proven evidences of structural integrity and least increase in temperature of tank.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.53-53
• /
• 2019

Cypripediums, popularly called lady's slippers or moccasin flowers, are the showiest and most sought after hardy terrestrial orchids, collected and grown by orchid and alpine plant enthusiasts alike. In Korea, 4 species of cypripedium are reported as Cypripedium japonicum, C. macranthos, C. guttatum, and C. calceolus. We had already reported the feasibilities of C. macranthos and C. guttatum with in vitro germination methods from immature seeds. The seeds of white lady's slipper orchid (Cypripedium macranthos Sw. alba) were collected 65 days after pollination in 2018. The green pods were sterilized with flame and sowed immediately on the POM(Phytomax orchid maintenance media(R), Sigma) supplemented with BAP 0, 0.5, 1.0 mg/L and NAA 0, 1, 2mg/L. The germination of seed was observed 90 days after sowing, and the plantlets were subcultured to the same media according to the size of the protocorm with 1~2, 2~3, 3~4, 5~6, 7~8mm. The time of the subculture to the new media seems to be critical factors of forming rhizoids which is the hairy root of the cypripediums. As a results, the protorms of the white lady's slipper orchid was successfully germinated in the POM media supplemented BAP 0.5 and NAA 1.0 mg/L. The roots and rhizoids were formed in 5~6mm protocorms subculture over 95% survival ratio. We also tried to subculture to liquid medium without activated charcoal, however the browning or malformation of the roots was observed in the root. The formation of shoots from the protocorm was effectively enhanced in the POM media with non-additives of plant growth regulators. These results indicate the possibility of high and stable production and practical industrialization of endangered white lady's slipper orchids.

• Journal of the Korean Society for Library and Information Science
• /
• v.56 no.4
• /
• pp.101-127
• /
• 2022

Article 31(1) of the Libraries Act(Act No. 18547), which was completely revised on December 7, 2021, stipulates that "the head of a local government or the superintendent of a city/provincial office of education must formulate a plan for the establishment and operation of a public library in advance and obtain the pre-evaluation of the feasibility of establishing a public library from the Minister of Culture, Sports and Tourism." Through the preliminary feasibility evaluation at the construction stage of the public library, it is possible to adjust distribution to improve the adequacy of scale and resolve regional imbalances and gaps. In addition, it is expected to increase service satisfaction and operational enhancement by inducing faithful securing of core infrastructure (librarians, collection, facilities, systems, etc.) in terms of balanced regional development and public library construction. The purpose of this study is to develop and present the basic direction and feasibility evaluation model for establishment of public libraries. The proposed evaluation model is expected to secure the legal basis and institutional legitimacy of the pre-evaluation system for public library establishment and to prevent waste of tax due to poor construction and operation of public libraries.