• Steel and Composite Structures
• /
• 제50권3호
• /
• pp.319-336
• /
• 2024

Ultra-high-performance concrete (UHPC) has attracted increasing attention in prefabricated steel-concrete composite beams as achieving the onsite construction time savings and structural performance improvement. The inferior replacement and removal efficiency of conventional prefabricated steel-UHPC composite beams (PSUCBs) has thwarted its sustainable applications because of the widely used welded-connectors. Single embedded nut bolted shear connectors (SENBs) have recently introduced as an attempt to enhance demountability of PSUCBs. An in-depth exploration of the mechanical behavior of SENBs in UHPC is necessary to evidence feasibilities of corresponding PSUCBs. However, existing research has been limited to SENB arrangement impacts and lacked considerations on SENB geometric configuration counterparts. To this end, this paper performed twenty push-out tests and theoretical analyses on the shear performance and design recommendation of SENBs. Key test parameters comprised the diameter and grade of SENBs, degree and sequence of pretension, concrete casting method and connector type. Test results indicated that both diameters and grades of bolts exerted remarkable impacts on the SENB shear performance with respect to the shear and frictional responses. Also, there was limited influence of the bolt preload degrees on the shear capacity and ductility of SENBs, but non-negligible contributions to their corresponding frictional resistance and initial shear stiffness. Moreover, inverse pretension sequences or monolithic cast slabs presented slight improvements in the ultimate shear and slip capacity. Finally, design-oriented models with higher accuracy were introduced for predictions of the ultimate shear resistance and load-slip relationship of SENBs in PSUCBs.

• 한국건설관리학회논문집
• /
• 제13권4호
• /
• pp.48-59
• /
• 2012

갱폼(Gangform)은 기준층 설치 후 반복사용이 가능하여 기존 합판 거푸집에 비해 공기단축이 가능하고 높은 경제성을 확보할 수 있는 시스템 거푸집이다. 또한 거푸집의 처짐량이 작고 외력에 대한 안정성이 높은 장점을 지니고 있다. 그러나 갱폼의 운반 및 인양작업은 타워크레인의 동력에 전적으로 의존하고 있으며, 갱폼 인양작업을 위해 공동주택 골조공사 6~7일 사이클 중 1일의 공기를 차지하는 등 전체 골조 공기에 있어 큰 비중을 차지하고 있다. 이러한 문제점을 해결하기 위해 국내외 관련 업계를 중심으로 갱폼 인양과 관련된 다양한 연구 및 기술개발 노력이 수행되어 왔다. 특히, '공동주택 전용 갱폼 인양 자동화 기술 개발에 관한 연구'는 타워크레인의 동력원에 의존하지 않고 별도의 인양장치에 의해 갱폼의 인양작업을 가능할 수 있도록 하는 개념 디자인을 제안하였다. 이에 대한 후속 연구로써 본 연구에서는 구조해석 프로그램을 활용하여 선행 연구를 통해 제안된 갱폼 인양 자동화 기술의 구조적 안정성을 해석하고, 실제 공동주택 건설현장의 공정데이터를 적용하여 갱폼 인양 자동화 기술 적용 시 기존 타워크레인의 양중부하 감소 효과를 분석함으로써 제안된 공동주택 전용 갱폼 인양 자동화 기술의 기술적 타당성을 제시하고자 한다.

• 한국작물학회지
• /
• 제30권3호
• /
• pp.217-222
• /
• 1985

초형이 다른 3종의 수도 Isogenic line(Open-Spread- 및 Broom-type)을 5수준의 이앙밀도(47.62, 22.22, 15.15, 15.11 및 8.33주/$m^2$)와 4수준의 시비조건(증비, 보비, 감비 및 무비)에 공시하여 얻은 수량자료를 Multiple regression polynomial 수식으로 고정하고 편미분하여 밀도와 시비및 밀도$\times$시비의 작용력을 해석하였다. 그 결과는 다음과 갈다. 1. 소식조건하에서의 밀도변동에 따른 수량 반응은 Broom-type이 가장 높고 예민하였다(도 1). 2. 이앙밀도의 작용력〔$\delta$f(D, F)/$\delta$D〕은 Open-, 및 Spread-type이 다비에서 높아지는 대신에Broom-type은 시비와 관계없이 소식 및 밀식에서 높은 경향이었다.(도 2). 3. 시비율의 작용력 〔$\delta$f(D, F)/$\delta$D〕은 0~1000kg/10a 범위로서 Open- 및 Spread-type에서는 밀식조건하에서 높았으나 Broom-type에서는 소식조건하에서 소비 및 다비의 작용력이 큰 경향이었다(도 3). 4. Broom-type의 소식조건하에서 밀도$\times$시비의 상호작용력 〔$\delta$$^2$F(D, F)/$\delta$D$\delta$F〕은 음성을 나타내었고, Open- 및 Spread-type은 표준 및 밀식과 증비 조건에서 양성을 나타내었다(도 4). 5. $m^2$당 11~14주의 소식조건하에서 추정되는 소요시비수준은 Open-type 이 1.3~1.5배비인 반면에 Broom-type은 1.5배비 이상의 수준인 것으로 판단되었다. 6. 소식에 의한 이앙노동의 생력화를 위해서는 다비수용이 가능한 Broom-type의 연구가 필요할 것으로 해석이 된다.

• 한국도로학회논문집
• /
• 제18권4호
• /
• pp.19-28
• /
• 2016

PURPOSES : Long-life asphalt pavements are used widely in developed countries. In order to be able to devise an effective maintenance strategy for such pavements, in this study, we evaluated the performance of the long-life asphalt pavements constructed along the national highways in South Korea. Further, an economic evaluation of the long-life asphalt pavements was performed based on a life-cycle cost analysis. We aimed to devise a model for evaluating the performance of long-life asphalt pavements using the national highway pavement management system (PMS) database as well as for analyzing the economic feasibility of such pavements, in order to promote their use in South Korea. METHODS : The maintenance history and pavement performance data were obtained from the national highway PMS database. The pavement performances for a total of 292 sections of 10 lanes (5 northbound lanes and 5 eastbound lanes) of national highways were used in this study. Models to predict the performances of hot mix asphalt (HMA) and long-life asphalt pavements under two distinct traffic conditions were developed using a simple regression method. Further, the economic feasibility of long-life asphalt pavements was evaluated using the Korea Pavement Management System (KoPMS). RESULTS : We developed service-life prediction models based on the traffic volume and the equivalent of single-axle load and found that long-life asphalt pavements have service lives 50% longer than those of HMA pavements. Further, the results of the economic analysis showed that long-life asphalt pavements are superior in terms of various economic indexes, including user cost, delay cost, total cost, and user benefits, even though their maintenance cost is higher than that of HMA pavements. A comparison of the economic feasibilities of the various groups showed that group A is superior to HMA pavements in all aspects except in terms of the maintenance criterion (crack 20% or higher) as per the NPV index. However, the long-life asphalt pavements in group B were superior in terms of the maintenance criterion (crack 25% or higher) regardless of the economic feasibility. CONCLUSIONS : The service life of long-life asphalt pavements was found to be approximately 50% longer than that of HMA pavements, regardless of the traffic volume characteristics. The economic feasibility of long-life asphalt pavements was evaluated based on the KoPMS. The results of the economic analysis were the following: long-life asphalt pavements are exceptional in terms of almost all factors, such as user cost, delay cost, total cost, and user benefit; however, the exception is the maintenance cost. Further, the economic feasibility of the long-life asphalt pavements in group B was found to be better than that of the HMA pavements (crack 25% or higher).

• 한국병원경영학회지
• /
• 제5권1호
• /
• pp.129-155
• /
• 2000

This empirical study, activity-based costing, a newly introduced approach that has proved to be an improvement over the conventional costing system in product or service costing, is applied at department of clinical pathology in K university hospital. The study subjects were 233 test procedures done in clinical laboratory of K university hospital. Activity analysis was done by interview, questionnaires, and time study, and the amount of resources consumed by each activity and their costs are then traced and applied to the laboratory tests. The main purpose of this study were to compare the test costs of activity-bases costing with those of conventional costing, and test fees of medical insurance, and to provide accurate cost informations for the decision makers of hospital. The major findings of this study were as belows. 1. The cost drivers for application of activity-based costing at clinical laboratory were cases of sample collection, case of specimen, cases of test, and volume-related allocation bases such as direct labor hours and total revenue of each test. 2. The profits of each clinical laboratory fields analyzed by conventional costing were different from the profits analyzed by activity-based costing, especially in the field of Urinalysis(approximately over estimated 750%). 3. The standard full costs by conventional costing were quite different from the costs computed by using activity-based costing, and the difference is most significant with the tests of long labor time. 4. From the comparison between costs computed by using activity-based costing and medical insurance fees, some test fees were significantly lower than the costs, especially in the non-automated fields. As described in this study, activity-based costing provides more accurate cost information than does conventional costing system. The former approach is especially important in the health care industry including hospitals in which planning and controlling the costs services provided are the key to maintaining a healthy financial status for the organization. Despite the contribution of activity-based costing the economic as well as technical feasibilities of implementing such a cost accounting system in an organization must be evaluated. In the development of activity-based costing systems, an activity analysis has to be conducted to identify activities that consume resources. This involves a detailed study of the organization's logistics and accounting information systems, and it is an expensive project in itself. Besides, it can be quite difficult and time consuming to identify and trace resource consumption to a specific activity. Thus the activity-based costing system should be implemented only when the decrease in cost of error far exceeds the increase in cost of measurement. By combining activity-based costing with standard costing, health care administrators can better plan and control the costs of health services provided while ensuring that the organization's bottom line is healthy.

• 콘크리트학회논문집
• /
• 제18권3호
• /
• pp.303-312
• /
• 2006

본 연구에서는 GFRP 보강근의 인장특성치 시험을 위한 그립 시스템의 적합성을 검증하기 위하여 캐나다 규준에서 제안하는 그립(CSA 그립), ASTM에서 제안하는 그립(ASTM 그립) 및 프리스트레싱 강연선의 정착에 일반적으로 사용되는 쐐기형 그립 등을 사용하여 GFRP 보강근에 대한 인장특성치 시험을 실시하였다. 또한, 현재 외국에서 상용화되고 있는 대표적인 2종류의 GFRP 보강근(나선형 GFRP 보강근, 모래분사형 GFRP 보강근) 및 국내에서 자체 제작한 원형 GFRP 보강근을 대상으로 하여 인장특성치 분석을 위한 시험을 실시하고 각각의 제안된 그립의 적용성 여부를 검토하였다. 본 시험에 사용된 시험편의 제작, 가력 및 측정장치의 설치 등은 CSA S806-02에서 제안하는 권고사항에 따라 실시하였다. 외국의 상용화된 GFRP 보강근에 대하여 그립의 종류를 달리하여 실시된 본 시험결과에 의하면, CSA 그립을 사용하여 시험된 GFRP 보강근의 인장강도가 가장 높은 값을 보이는 것으로 나타났다. 그러나 ASTM 그립을 사용한 시험편에서 관측되는 강도저하 현상은 CSA 그립을 사용한 시험체에 비하여 약 10% 미만인 것으로 관측되었다. 한편, CSA 그립은 제작공정이 까다로울 뿐만 아니라 재사용이 불가능하여 경제성 측면에서도 불리한 것으로 파악되었다. 따라서, 실용적인 측면에서 판단하면 GFRF 보강근의 인장시험에는 ASTM 그립이 적절할 것으로 판단된다.

• 농업과학연구
• /
• 제10권2호
• /
• pp.393-405
• /
• 1983

The demand for livestock and poultry products including beef, pork, chicken, egg and milk whose income elasticities are relatively higher than other staple foods, has been increased significantly during the past two decades in response to the remarkable increase in per capita GNP. This trend will be continued during the fifth and the sixth five year economic development plan period beginning with 1982. The annual GNP growth rate will be 7.5% on the average during the next 10 years. It is greatly needed to estimate the demand for beef, pork, chicken egg and milk and to study the feasibilities of domestic production of livestock products for the formulation of adequate policies in order to equate the consumption and the production during the 1980s. So this study reviewed the possible changes in the food consumption patterns during the 1980s, estimated the demand for beef, pork, chicken, egg and milk by using empirical demand functions and finally made suggestions for the formulation of long term price stabilization policies for each livestock, poultry and dairy products through the equilibrium of the quantity of demand for and supply of the products. There are many factors affecting the demand for meats, but this study considered own price, prices of supplements and substitutes and per capita income as the independent variables in the demand equations. It was found that it's own price and income were most significantly affecting factors among others and the degree of substitution effects were remarkably different among the products. According to the meat demand derived in this study, per capita consumption of beef, pork and chicken in the base year 1982 was 11.2kg for total meat, 2.5kg beef, 6.0kg pork and 2.5kg chicken, 106 pieces egg, 15.1kg milk respectively, while those in 1991 were 19.3kg for total meat, 4.8kg beef, 9.6kg pork, 4.9kg chicken, 133pieces egg and 44.1kg milk. It is also predicted through this study that, when the level of production costs be maintained, the domestic production of pork and chicken will meet the demand for them during the fifth and sixth five year economic plan period. However, there will be chronic shortage of beef supply during the coming years. The annual import requirement will be 30,000tons to 40,000tons during the period. In order to stabilize the domestic livestock and poultry and dairy products market, the government should introduce measures to curb the increase in beef consumption by encouraging the consumption of pork and chicken. For this, the livestock production policy measures should be concentrated on : 1) the improvement of infrastructures of beef production by introducing advanced feeding and management technology, subsidies for the establishment of facilities and price support programs for farmers : 2) the development of dairy beef : 3) the reinforcement of the forecast systems for pork and chicken production and consumption.

• 한국가스학회지
• /
• 제24권4호
• /
• pp.18-24
• /
• 2020

본 연구의 목적은 화재사고가 발생한 건물에 인접한 LPG 탱크용 방화벽의 적용성을 검증하는 것이다. 제안된 방화벽 재료는 (1) 두께 10 mm 목재합판, (2) 내화도료를 도포한 목재합판, (3) 두께 75 mm Expanded Polystyrene, (4) 두께 75 mm 유리섬유 충진 샌드위치 판넬, (5) 두께 75 mm Autoclave Lightweight Concrete이다. 화원은 1 m 정사각형으로 120-140 g/s의 LPG를 균일하게 분사하여 방화벽과 후단의 탱크를 가열한다. 적용성은 시험 후 방화벽의 구조적 건전성 확인, 방화벽 양면 및 탱크표면 온도, 탱크 인근 복사열을 분석하여 판단한다. 그 결과, ALC 방화벽이 유일하게 구조 건전성을 유지하였고 저장탱크 온도를 가작 적게 상승시켜 폭발 방지 적용성을 확인하였다. 본 실험결과를 활용하여 방화벽의 성능평가 기준 마련에 필요한 핵심인자를 도출하였다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 춘계학술대회
• /
• pp.53-53
• /
• 2019

Cypripediums, popularly called lady's slippers or moccasin flowers, are the showiest and most sought after hardy terrestrial orchids, collected and grown by orchid and alpine plant enthusiasts alike. In Korea, 4 species of cypripedium are reported as Cypripedium japonicum, C. macranthos, C. guttatum, and C. calceolus. We had already reported the feasibilities of C. macranthos and C. guttatum with in vitro germination methods from immature seeds. The seeds of white lady's slipper orchid (Cypripedium macranthos Sw. alba) were collected 65 days after pollination in 2018. The green pods were sterilized with flame and sowed immediately on the POM(Phytomax orchid maintenance media(R), Sigma) supplemented with BAP 0, 0.5, 1.0 mg/L and NAA 0, 1, 2mg/L. The germination of seed was observed 90 days after sowing, and the plantlets were subcultured to the same media according to the size of the protocorm with 1~2, 2~3, 3~4, 5~6, 7~8mm. The time of the subculture to the new media seems to be critical factors of forming rhizoids which is the hairy root of the cypripediums. As a results, the protorms of the white lady's slipper orchid was successfully germinated in the POM media supplemented BAP 0.5 and NAA 1.0 mg/L. The roots and rhizoids were formed in 5~6mm protocorms subculture over 95% survival ratio. We also tried to subculture to liquid medium without activated charcoal, however the browning or malformation of the roots was observed in the root. The formation of shoots from the protocorm was effectively enhanced in the POM media with non-additives of plant growth regulators. These results indicate the possibility of high and stable production and practical industrialization of endangered white lady's slipper orchids.

• 한국문헌정보학회지
• /
• 제56권4호
• /
• pp.101-127
• /
• 2022

2021년 12월 7일 전부 개정된 「도서관법」 (법률 제18547호) 제31조 제1항은 "지방자치단체의 장 또는 시·도교육감은 공립 공공도서관을 설립하려면 미리 공공도서관 설립·운영계획을 수립하여 문화체육관광부장관으로부터 설립타당성에 관한 사전평가를 받아야 한다"고 규정하고 있다. 공공도서관 건립의 사전평가는 공공도서관 건립규모의 적정성 제고 및 분포 조정을 통한 시·도별 및 시·군·구별 불균형 및 격차를 해소하여 지역균형발전을 도모하며 공공도서관 건립단계에서 핵심인프라(사서, 자료, 시설, 시스템 등)의 충실한 확보를 유도하여 서비스 만족도와 운영 내실화를 기할 수 있을 것으로 생각된다. 이에 따라 본 연구는 공공도서관 설립타당성 사전평가제의 기본방향, 평가체계 및 평가모형(안)을 개발·제시하는 데 목적이 있다. 제시한 평가모형(안)은 공공도서관 설립타당성 사전평가제의 법적 근거와 제도적 정당성을 확보하고, 지방자치단체나 교육청은 공공도서관 건립계획 수립에 필요한 지침 제시를 통한 사전평가 준비의 혼란 방지와 편의성 제공하여 부실한 공공도서관 건립 및 운영에 따른 세금 낭비를 차단할 수 있을 것으로 기대된다.