• Journal of Life Science
• /
• v.20 no.6
• /
• pp.902-906
• /
• 2010

A producer of thermophilic extracellular lipase, Geobacillus kaustophilus DSM 7263, was selected from various microorganisms of the Geobacillus genus. We investigated optimum conditions for mass production of G. kaustophilus lipase. Among the different natural oil media, olive oil was optimal for enzyme production. The maximum amount of enzyme production was obtained when G. kaustophilus was grown in a medium containing 0.5% olive oil as a carbon source. The pH and temperature for optimal growth were pH 8.0 and $55^{\circ}C$, respectively, while the optimum pH and temperature for lipase production were pH 6.0 and $50^{\circ}C$, respectively. In the presence of $Mg^{2+}$ and $Mn^{2+}$, lipase production was dramatically enhanced by 247% and 157%, respectively, whereas enzyme production was inhibited by $Zn^{2+}$, $Cu^{2+}$, and $Cd^{2+}$. The addition of 0.1% (v/v) triton X-100 increased lipase production and cell growth when compared to the negative control.

• Economic and Environmental Geology
• /
• v.30 no.5
• /
• pp.443-450
• /
• 1997

The main purpose of this study is to investigate mineralogical and chemical changes during natural weathering, and assess the mobility of major and trace elements. Yongwol power plant utilize anthracite coal which is mainly composed of illite, kaolinite, pyrophyllite and quartz in mineralogy. Coal and coal-derived fly ash samples were sampled by the electrostatic precipitator in Yongwol coal-fired power plant in Korea. Short term weathered fly ash were also collected in ash disposal mound, and two profile soil samples were taken from an ash near the power plant. Amorphous materials are the main component of the fly ash, and mullite, quartz, magnetite and heamatite are present in all coal-derived fly ash. In chemistry, Si and Al are the most abundant elements of the total content. The ash samples were fractionated into upper $90{\mu}m$ and under $45{\mu}m$ size. Finer particles show higher concentrations in metal contents including Co, Cr, Cu, Ni, V, Zn and Pb. Concentration of Zn and Pb are nearly 4 times higher concentration in the finer particles. For the profile samples, the concentrations of $SiO_2$, $Na_2O$, MgO and $K_2O$ generally show increasing trends with depth, whereas those of $Fe_2O_3$ and $TiO_2$ appear to decrease with depth. Content of MnO does not show any specific depth trend. For the trace elements, Co, Cu, Ni and V show increasing concentrations with depth.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.447-457
• /
• 2003

In order to understand the distribution of changes of geochemical characteristics in surface sediments according to various environmental changes around the artificial Lake Shihwa, surface sediments were sampled at $13{\sim}15$ sites form 1997 to 1999 and analyzed by C/S analyzer, ICP/MS and AAS. The average $S/C_{org}$ ratio was 0.35 in the surface sediments, which is similar to 0.36, the characteristic ratio of marine sediments. Heavy metal contents and enrichment factors in the surface sediments tended to be decreasing from the head to the mouth of the Lake Shihwa. With the deposition of fine-grained sediments in the central part of lake, anoxic water column induced the sulfides compounds with Cu, Cd and Zn. Metals such as Al, Fe, Cr, Co, Ni, Cu, Zn and Cd except for Mn and Pb showed relatively high correlation coefficients among them. The contents of Cr, Co, Ni, Cu, Zn and Cd in the surface sediments of the lake were two to five times higher than those in the lake before dike construction and also in outer part of the dike. These are mainly due to the Input of untreated industrial and municipal waste-waters into the lake, and the accumulation of heavy metals by limitation of physical mixing. Although metal contents of the surface sediments at the sites near the water-gate due to outer seawater inflow tended to be lower than those during the desalination, heavy metals were deposited in areas around the new industrial complex in the evidence of spatial distribution of heavy metals in the sediments. This is mainly due to the input of untreated waste-waters from tributaries.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.107-107
• /
• 2018

무전해 니켈도금 용액의 성분은 Ni(II)염, 환원제, 적합한 금속 배위 리간드, 안정제 및 특정 특성 요구에 대한 첨가제를 포함한다. 일반적으로 도금 욕에는 미량의 안정제가 함유되어 있다. 만약 적절한 안정화 시스템이 없는 도금 욕에서 도금 공정 시 도금 시작 직후에 많은 양의 니켈 플레이크(Ni flake)가 생성되어 빠르게 도금 용액이 분해되어 더 이상 도금이 어렵게 된다. 그러나 무전해 도금 욕에서 안정제의 역할 및 도금 층에 미치는 영향에 대한 연구는 여전히 부족한 실정이다. 따라서 본 연구에서는 $Pb^{2+}$ 안정제 농도가 도금 층에 미치는 영향과 캐비테이션 침식 실험을 통해 그 내구성을 평가하고자 하였다. 무전해 니켈코팅을 위한 모재는 회주철(FC250)을 $19.5mm{\times}19.5mm{\times}5mm$의 크기로 가공하였다. 회주철의 인장강도는 $330N/mm^2$이며, 그 성분 조성(wt.%)은 3.23 C, 1.64 Si, 0.84 Mn, 0.016 P, 0.013 S 그리고 나머지는 Fe이다. 시험편은 SiC 페이퍼 #1200까지 연마하여 시험편의 표면 거칠기는 $1.6-2.1{\mu}m$ 범위 내로 제작하였다. 무전해 도금 전 시험편은 탈지를 위해 상온의 아세톤 용액에서 3분간 초음파 세척하고, $90^{\circ}C$의 알카리 수용액으로 5분간 세척하였다. 그리고 표면 활성화를 위한 산세척은 5% 황산용액에서 30초 동안 실시하였다. 도금조로 500mL 비커를 사용하였으며, 모든 시험편은 2시간 동안 무전해 니켈도금을 실시하였다. 그리고 니켈도금 층의 내식성과 내구성을 평가하기 위해 전기화학적 분극 실험을 통한 타펠분석과 ASTM G32 규정에 의거한 캐비테이션 침식 실험을 실시하였다. 그 결과 안정제 농도가 도금 속도와 도금 층의 성분 변화에 크게 영향을 미쳤으며, 그에 따라 도금 층의 내식성과 내구성이 크게 변화되었다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.759-771
• /
• 2011

We evaluated the pollution levels of organic matter and metallic element (Fe, Cu, Pb, Zn, Cd, Ni, Cr, Mn, As, and Hg) in the intertidal surface sediments of Aphae Island using several sediment quality guidelines (SQGs) and assessment techniques for sediment pollution. Based on the textural composition of sediment, the surface sediments were classified into two main sedimentary facies: slightly gravelly mud and silt. The concentrations of chemical oxygen demand (COD) and acid volatile sulfide (AVS) in the sediments ranged from 4.6-9.9 (mean $7.4{\pm}1.1$) $mgO_2/g{\cdot}dry$ and from ND-0.53 (mean $0.04{\pm}0.10$) mgS/$g{\cdot}dry$, respectively. These values were considerably lower than those reported from a farming area in a semi-enclosed bay of Korea and for SQGs in Japan. The metallic element concentrations in the sediments varied widely with the mean grain size and organic matter content, implying that the concentrations of metallic elements are influenced mainly by secondary factors, such as bioturbation, the resuspension of sediment, and anthropogenic input. The overall results for the comparison with SQGs, enrichment factor (EF), and geoaccumulation index ($I_{geo}$) indicate that the surface sediments are slightly polluted by Cr and Ni, and moderately polluted by As. Our results suggest that the intertidal surface sediments of Aphae Island are not polluted by organic matter or metallic elements and the benthic conditions are suitable for healthy organisms.

• Journal of Environmental Science International
• /
• v.8 no.5
• /
• pp.593-600
• /
• 1999

In order to determine the changes of sediment facies and metal levels in surface sediments after the construction of Shiwha Lake, surface sediments were sampled at 8 sites located on the main channel monthly from June, 1995 to August, 1996 and analysed for 12 metals (Al, Fe, Mn, V, Cr, Co, Ni, Cu, Zn, Cd, As and Pb) by ICP/AES and ICP/MS. Two groups of sampling sites(the inner lake with 3 sites and the outer lake with 5 sites) are subdivided by the surface morphology ; the inner lake is a shallow channel area with a gentle slope, while the outer lake is relatively deep and wide channel with a steep slope which has many small distributaries. After the construction of dam, fine terrestrial materials were deposited near the outer lake, which resulted in the change of major sediment facies from sandy silt to mud. With the deposition of fine sediments in the outer lake, anoxic water column induced the formation of sulfide compounds with Cu, Cd, Zn and part of Pb. Metal (Cr, Ni, Cu, Zn and Cd) contents in sediments increased up to twice within 2 years after the construction of dam. This is due to the direct input of industrial and municipal wastes into the lake and the accumulation of metals within the lake. In addition, frequent resuspension of contaminated sediments in a shallow part of the lake may make metal-enriched materials transport near the outer lake with fine terrestrial materials. As the enrichment of Cu, Zn, Cd and part of Pb in the Shiwha Lake may be related to the formation of unstable sulfide compounds by sulfate reduction in anoxic water or sediment column, the effect of mixing with open coastal seawater is discussed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.4
• /
• pp.265-273
• /
• 2005

Chemical properties and heavy metal concentrations of forest soils of four abandoned coal mine lands affected by coal mining activities in the Mungyeong area were investigated to provide basic information for revegetation of abandoned coal mine lands. Soil pH in abandoned coal mine lands ranged from 5.30 to 6.76 it in the control site was 5.23. Contents of organic matter and total N in abandoned coal mine lands were $4.46\~7.19\%\;and\;0.07\~0.15\%$, respectively. Available P contents were 6.54 for A (Samchang), 6.52 for B (Bongmyeong),3.94 fur C (Kabjung), 5.45 mg/kg for D (Danbong coal mine land) and 5.25 mg/kg for the control site, which had a positive correlation with soil pH. Contents of exchangeable Ca, Mg, K and Na in abandoned coal mile lands averaged 196.1, 88.7, 88.2 and $10.2cmol^+/kg$, with a range of $132.1\~242.1,\;24.2\~138.\; 64.9\~120.8\;and\;8\~12.2cmol^+/kg$, respectively. Those of the control site were 192.8, 95.8, 104 and $21.2 cmol^+/kg$, respectively. Heavy metals such as Al, As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn of forest soil in abandoned coal mine lands have a larger content than those of the control site. Al, Mn and fb content was especially high in abandoned coal mine lands. The Al content of forest soil in abandoned coal mine lands ranged from 397 to 917 ppm, which was considered to be high enough to inhibit tree growth. Therefore, it is suggested that soils of abandoned coal mine lands contaminated by mining activities need to be properly treated for remediation of environmental problems.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.283-287
• /
• 2007

KIER has been developing the anode-supported flat tubular solid oxide fuel cell unit bundle for the intermediate temperature($700{\sim}800^{\circ}C$) operation. Anode-supported flat tubular cells have Ni/YSZ cermet anode support, 8 moi.% $Y_2O_3$ stabilized $ZrO_2(YSZ)$ thin electrolyte, and cathode multi-layer composed of Sr-doped $LaSrMnO_3(LSM)$, LSM-YSZ composite, and $LaSrCoFeO_3(LSCF)$. The prepared anode-supported flat tubular cell was joined with ferritic stainless steel cap by induction brazing process. Current collection for the cathode was achieved by winding Ag wire and $La_{0.6}Sr_{0.4}CoO_3(LSCo)$ paste, while current collection for the anode was achieved by using Ni wire and felt. For making stack, the prepared anode-supported flat tubular cells with effective electrode area of $90\;cm^2$ connected in series with 12 unit bundles, in which unit bundle consists of two cells connected in parallel. The performance of unit bundle in 3% humidified $H_2$ and air at $800^{\circ}C$ shows maximum power density of $0.39\;W/cm^2$ (@ 0.7V). Through these experiments, we obtained basic technology of the anode-supported flat tubular cell and established the proprietary concept of the anode-supported flat tubular cell unit bundle.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.643-658
• /
• 1994

The sedimentary records of anthropogenic metal loads in the Suyeong Bay, Pusan were determined by combining the Pb-210 dating technique with the measurements of heavy metals in the sediment cores. The sedimentation rates of sediment particles ranged from $0.12\;to\;0.20\;g/m^2/yr\;or\;2.4{\sim}4.0\;mm/yr$ in accumulation rates. The lowest sedimentation rate was observed at station S3 which was characterized by a bottom with relatively low organic matter contents(e.g. TIL and TOC). Heavy metals showed generally higher concentrations at station S1 and S2 near the mouth of the Suyeong River than at station S3 and the outmost station S4. The contents of copper, lead and zinc in the sediment cores especially from station S1 and S2 began to increase around 1930, and were at their highest levels in the $1960{\sim}1970$ period as a result of increasing industrial activities. Concentrations of these heavy metals have slightly decreased since 1970, probably due to regulation of pollution discharge. The natural background levels of copper, lead and zinc in the sediments of this bay ranged $18{\pm}4ppm,\;28{\pm}6ppm\;and\;74{\pm}9ppm$, respectively, by averaging the contents in the sediment depths corresponding to periods between about 1900 and 1920 at the four stations. The total amounts of anthropogenic loads deposited in the sediments since about 1930 were estimated to be $9{\sim}291{mu}g/cm^2$ for lead, $165{\sim}1122{mu}g/cm^2$ for zinc and $20{\sim}208{mu}g/cm^2$ for copper. These values were remarkably high at stations S1 and S2 relative to the other two stations. At stations S1 and S2, the anthropogenic loads of lead, copper and zinc constituted $29{\sim}30\%,\;32{\sim}42\%\;and\;28{\sim}35\%$ of the total sedimentary inventories at the present day, respectively. These metal contents have a good correlation(r>0.7) with each other and cadmium measurements also show a positive linear relation with nickel or total organic nitrogen.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.68-68
• /
• 2003

Aquaporin은 막관통 통로 단백질(transmembrane channel protein)로서, 삼투압의 농도구배에 따라 세포막을 가로질러 물분자를 이동시키는 기능을 하고 있다. 포유류 초기배아에서 포배강 형성은 영양외배엽세포에서 $Na^+ / K^+$ATPase에 의한 이온 농도 구배가 형성되면 auqaporin에 의해 물이 포배강으로 유입되면서 이루어진다. 본 연구에서는 생쥐 초기배아에서 반정량적인 역전사 중합효소 연쇄반응 방법(semi-quantitative RT-PCR)과 실시간 역전사 중합효소 연쇄반응 방법(real-time RT-PCR)을 통하여 AQP8과 9의 mRNA발현을 조사하고 다중 면역형광현미경 방법(confocal immunofluorescence microscopy)을 통해 단백질 발현양상을 분석하였다. AQP8 mRNA는 상실기까지 발현되지 않다가 포배기에 이르러 발현되었고 AQP9 mRNA는 수정란에서부터 발현되어 포배기에는 유의할 정도로 증가하였다. 따라서 AQP8 mRNA는 배아유전자가 활성화되어 나타나는 것이고 AQP9 mRNA는 모계유전자 기원임을 알 수 있었다. AQP8 단백질은 상실배 단계까지 발현되지 않다가 포배시기에 영양외배엽세포사이의 접합면에 발현되었고 AQP9 단백질은 상실배 시기에 할구 사이의 인접 부위에서 강하게 발현되었다가 포배시기에는 세포간의 접합면에 약하게 발현하는 경향을 나타내었다. 실시간 역전사 중합효소 연쇄반응 방법으로 조사한 결과 포배에서 물과 글리세롤을 통과시키는 AQP9는 mRNA의 발현양이 AQP8보다 약 4배 정도 많았다. 또한 포배기에 이르러서야 물만을 통과시키는 AQP8의 발현이 나타나는 것을 보아 포배강 형성시 외부에서 영양외배엽을 통해 포배강으로 유입되는 물의 이동(trans- trophectodermal water movements)에 AQP9보다 AQP8이 더 중요하게 관여할 것으로 사료된다., K, Pb, Cd, Cr, Co, Cu, Ni)을 측정하였다. 실험 조건1의 결과로서 각 국의 유아용 일회용 기저귀의 중금속 함량은 거의 유사한 경향을 나타내었으며 Cr, Zn, Pb, Ni, Mn, Mg, Li, K는 detection limit(2 ppm) 이하였고, Cd, Fe, Co, Cu, Ca, Al, Sr는 검출되었지만 기준치 이하였다. 실험 조건2의 결과로서 측정 항목(Cr, Sb, Cd, Pb, Ni, Co, Cu)중 Cr, Cd, Ni, Cu는 detection limit(0.1 ppm) 이하였고, Sb, Pb, Co는 검출되었지만 기준치 이하였다.았다. 4%의 경우에는 8$0^{\circ}C$이하로 온도를 낮추는 것이 좋은 상태를 나타내었다. 이와 같은 결과는 일반적으로 화학적 레팅을 4%, 7%에서한 선행결과와 상당히 다른 결과이다.염 농도가 증가할수록 감소 현상을 보였다.X>, 75BG30은 8.6$\mu\textrm{m}$, 75BG40은 7.02$\mu\textrm{m}$로 나타났다. 따라서 경화제 양에 관계없이 10$\mu\textrm{m}$ 이하로 나타나, 경화제 10$m\ell$만으로 미세한 크기를 얻을 수 있음을 알 수 있다. 젤리 강도 변화에 따른 차이는 300BF는 78.09$\mu\textrm{m}$ 300BG는 56.32$\mu\textrm{m}$로, 75BF나 75BG에 비하여 현저히 증가하여, 젤라틴의 젤리 강도는 캡슐 제조 조건의 주요한 변수임을 알 수 있다.추출물 투여시 혈당강하 및 혈중콜레스테롤 강하가 나타났으며, 상엽복합추출물 투여와 운동을 병행시 이러한 감소 효과가 더 뚜렷하게 나타났다.교육의 적임자로 보는 시각이 비교적 높았고 약 1/2정도는 영양교육에 참여하겠다는 의지를 가지고 있을 뿐만 아니라 실제로 영양지도를