• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.442-446
• /
• 1995

Electronic structures of Fe overlayers on Cr(Fe/Cr) films, with an Fe coverage of $1-20{\AA}$, have been investigated by using photoemission spectroscopy. Experimental results are compared with supercell band structure calculations for a system with monolayer (ML) Fe on each side of five layer Cr, Fe(1ML)/Cr(5ML)/Fe(1ML). The extracted Fe 3d partial spectral weight in Fe/Cr exhibits very interesting features for very thin Fe overlayers. First, a sharp emissionnear the Fermi energy is observed, which is expected to originate primarily from hybridization between Fe and Cr 3d electrons at the Fe/Cr interface, and partially from the Fe 3d surface states in the Fe overlayer. Second, other structures are observed at higher binding energies which resemble the Cr 3d valence bands, also suggesting large hybridization between Fe and Cr 3d states at the Fe/Cr interface. These conjectures are confirmed by band structure calculations for Fe(1ML)/Cr(5ML)/Fe(1ML).

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.28-33
• /
• 2006

La substituted perovskite $BiFeO_3$ have been prepared by a sol-gel method. Magnetic and structural properties of the powders were characterized with Mossbauer spectroscopy, XRD, SEM, and TG-DTA. The crystal structure is found to be a rhombohedrally distorted perovskite structure with the lattice constant $\alpha=3.985{\AA}\;and\;\alpha=89.5^{\circ}.\;Bi_{2/3}La_{1/3}FeO_3$ powders that were annealed at and above $600^{\circ}C$ have a single-phase perovskite structure. However, powders annealed at $900^{\circ}C$ have a typical perovskite structure with small amount of $Bi_2O_3$ phase. The Neel temperature of $Bi_{2/3}La_{1/3}FeO_3$ is found to be $680\pm3K$. The isomer shift value at room temperature is found to be 0.27 mm/s relative to the Fe metal, which is consistent with high-spin $Fe^{3+}$ charge states. Debye temperature far$Bi_{2/3}La_{1/3}FeO_3$ is found to be $305\pm5K$. The average hyperfine field $H_{hf}(T)$ of the $Bi_{2/3}La_{1/3}FeO_3$, shows a temperature dependence of $[H_{hf}(T)-H_{hf}(0)]/H_{hf}(0)=-0.42(T/T_N)^{3/2}-0.13(T/T_N)^{5/2}$ for $T/T_N<0.7$ indicative of spin-wave excitation.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.495-500
• /
• 2007

The inside wall of a coal gasifier is lined with refractory, and the corrosion of the refractory is an important factor affecting the refractory lifetime and the replacement period. This paper examines the changes in microstructure of a chromia refractory due to chemical reactions with slag having varying amounts of $Fe_2O_3$. Slag samples were prepared by adding $Fe_2O_3$ to KIDECO slag, and static corrosion experiments were carried out at $1550^{\circ}C$. The layer of $(Fe,Cr)_3O_4$ formation and the depth of Fe depletion in the infiltrating slag were determined. In addition, FactSage equilibrium calculations were carried out in order to determine the conditions of formation, and to compare with the experimental observations. In the sample exposed to KIDECO slag, which has about 10 wt% $Fe_2O_3$, the formation of $(Fe,Cr)_3O_4$ was not observed. As the $Fe_2O_3$ concentration in slag increased, $(Fe,Cr)_3O_4$ formation and Fe depletion depth increased. Increasing $Fe_2O_3$ concentration also made the slag/refractory interface indistinguishable. Equilibrium calculations predicted that higher $Fe_2O_3$ concentrations favor chromite formation at gasification temperatures. The chromite formation was most favorable when the amount of $Cr_2O_3$ was limited, as in the case of dissolved $Cr_2O_3$ in slag. When the concentration of $Fe_2O_3$ in slag was less than 20%, the formation of chromite was least favorable in the system with equal amounts of slag and refractory.

• Journal of the Korean Magnetics Society
• /
• v.2 no.1
• /
• pp.8-14
• /
• 1992

To improve the coercivity of ${\gamma}-Fe_{2}O_{3}$ particles. We have made cobalt ferrite epitaxial ${\gamma}-Fe_{2}O_{3}$ particles by crystallizing cobalt ferrite on the surface of ${\gamma}-Fe_{2}O_{3}$ particles. The coercivity of $Co_{x}Fe_{3-x}O_{4}$ which is conform to coating layer showed the most superior characteristic when the value of x was 1. On the formation of cobalt epitaxial ${\gamma}-Fe_{2}O_{3}$ particles, controlling reaction atmosphere as oxidation at. mosphere after non-oxidation atmosphere was the optimum condition to prepare cobalt epitaxial ${\gamma}-Fe_{2}O_{3}$ particles with superior magnetic properties. Epitaxial growth of cobalt ferrite on the surface of ${\gamma}-Fe_{2}O_{3}$ particles was accomplished at $90^{\circ}C$ for 30 minutes.

• Journal of Korea Foundry Society
• /
• v.33 no.6
• /
• pp.233-241
• /
• 2013

Effect of Fe and Mn contents on the castability of Al-9wt%Si-xMg-yFe-zMn alloy has been studied. The alloy was composed of ${\alpha}$-Al phase, Al+eutectic Si phase, ${\beta}$-Al5FeSi compound and chinese script ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compound. ${\beta}$-$Al_5FeSi$ and ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compounds assumed to effect the fluidity and shrinkage behaviors of the alloy during solidification due to the crystallization of ${\alpha}$-$Al_{15}(Fe,Mn)_3Si_2$ and ${\beta}$-$Al_5FeSi$ compounds above eutectic temperature. As Fe and Mn contents of Al-9wt%Si-0.3wt%Mg system alloy increased from 0.15wt% to 0.6wt% and from 0.3wt% to 0.7wt%, fluidity of the alloy decreased by 5.7% and 3.3%, respectively. And as Mg content of Al-9wt%Si-0.45wt%Fe-0.5wt%Mn system alloy increased from 0.3wt% to 0.4wt%, fluidity of the alloy decreased by 8.6%. When Fe content of the alloy increased from 0.15wt% to 0.6wt%, macro shrinkage ratio decreased from 6.1% to 4.1%, and micro shrinkage ratio increased from 0.04% to 0.24%. Similarly, Mn content of the alloy increased from 0.3wt% to 0.7wt%, macro shrinkage ratio decreased from 6.0% to 4.5% and micro shrinkage ratio increased from 0.12% to 0.18%. Judging from the castability of the alloy, Al-9wt%Si-0.3wt%Mg alloy with low content of Fe and Mn, 0.1wt% Fe and 0.3wt% Mn, is recommendable.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.9
• /
• pp.1393-1401
• /
• 1990

The physical properties of \ulcorner-Fe2O3 raw materials were investigated. \ulcorner-Fe2O3/Pd thick film gas sensors were fabricated with screen-printing method and their electrical and sensitivity characteristics were analyzed. The irreversible phase transition from \ulcorner-Fe2O3 to \ulcorner-Fe2O3 occured at 500\ulcorner. At this time, the cation of tetrahedral sites moved into the octahedral sites. \ulcorner-Fe2O3 raw materials contained only trivalent and no divalent iron. Thecontents of divalent iron (Fe+\ulcorner were increased as detecting gases were adsorbed. The addition of Pd (1w/o) to \ulcorner-Fe2O3 enhanced the sensitivity to gases. The sentivity of \ulcorner-Fe2O3/Pd(1w/o) thick film to 5000ppm C4H10 was 97% at the operating temperature of 300\ulcorner.

• Journal of the Korean Magnetics Society
• /
• v.8 no.2
• /
• pp.67-73
• /
• 1998

Crystallographic and magnetic properties of perovskite $Gd_{1-x}Sr_xFeO_{3-y}$ (x=0.0, 0.5) substituted $Sr^{2+}$ having larger inoic radius than $Gd^{3+}$ at GdFeO$_3$have been studied by x-ary diffraction, M$\ "{o}$ssbauer spectroscopy, and VSM. The cystal structures are found to be orthorhombic with the lattice parameters : $a_o=5.53\;{\AA},\;b_o=5.608\;{AA},\;C_o=7.724\;{\AA}$ for $Gd_{0.5}Sr_{0.5}FeO_{3-y}$ (x=0.0, 0.5) have been investigated over temperature range from 4.2 to 690 K using the M$\ "{o}$ssbauer technique. The Neel temperatuer of $Gd_{1-x}Sr_xFeO_{3-y}$ system is 690 K with x value of 0.0 and 515 K with x value of 0.5. Analysis of M$\ "{o}$ssbauer spectra Mohr's salt analysis for $Gd_{1-x}Sr_xFeO_{3-y}$ demonstrated the existence of the mixed valence states of iron and the coordination state of $Fe^{3+}$ and $Fe^{4+}$ ions. The Corresponding hyperfine parameters for GdFeO$_3$ are compatible with S=5/2 $Fe^{3+}$ in octahedral cooedination.l cooedination.

• Journal of the Korean Chemical Society
• /
• v.46 no.5
• /
• pp.419-437
• /
• 2002

An analytical method for the spectrometric simultaneous determination of the individual ions in the mix-tures of $Fe^{2+}$ and $Fe^{2+}$ ions utilizing a technique of flow injection analysis has been developed. The method was based on the oxidation reaction between $Fe^{2+}$ ion and $H_2O_2$ in an acidic medium and the subsequent formation of a red Fe$(SCN)^{3-x}_x$ ion by the complexation reaction between $Fe^{2+}$ ion and $SCN^-$ ion. Unlike the conventional methods which require separate processes for the pre-treatment of the sample solution, the current method uses the same FIA system for the pre-treatment and the analysis of the sample. The detection limit for the determination of $Fe^{2+}$ ion was found to be 6.00${\times}10^{-7}$M.

• Journal of the Korean Ceramic Society
• /
• v.19 no.3
• /
• pp.223-228
• /
• 1982

For the preparation of ferroxidure BaO.5.5 $Fe_2O_3$ with high coercive force, the green and calcined coprecipitates, which were obtained by neutralizing the mixed salt solution $FeCl_2-BaCl_2$ and $FeCl_3-BaCl_2$ with alkali solution $NaOH-Na_2CO_3$, were investigated about the thermal reaction, crystal growth, and the magnetic properties of the sintered specimens. The very single-domain crystallites of Ba-ferrite with high coercive force are formed from the coprecipitate of amorphous $Fe(OH)_3$ and amorphous $BaCO_3$ at lower temperature than that of subnucleus crystalline $\delta$-FeOOH and amorphous $BaCO_3$.

• Journal of Korea Foundry Society
• /
• v.31 no.1
• /
• pp.18-25
• /
• 2011

Effect of Fe and Mn contents on the tensile properties has been studied in Al-9wt%Si-0.3wt%Mg alloy. As Fe content of Al-9wt%Si-0.3wt%Mg-0.5wt%Mn alloy increased from 0.15wt% to 0.45wt%, tensile strength of as-cast alloy decreased from 192 MPa to 174 MPa, and elongation of the alloy also decreased from 4.8% to 4.2%. Decrease of these properties can be explained as the formation of plate shape, ${\beta}-Al_5FeSi$ phase with high Fe/Mn ratio of the alloy. However when Mn content of Al-9wt%Si-0.3wt%Mg-0.45wt%Fe alloy increased from 0.3wt% to 0.5wt%, tensile strength of T6 aged alloy increased from 265 MPa to 275 MPa, and elongation of the alloy increased from 2.3% to 3.6%. These improvements attribute to chinese script, ${\alpha}-Al_{15}(Mn,Fe)_3Si_2$ phase shape-modified from ${\beta}-Al_5FeSi$ phase with low Fe/Mn ratio of the alloy.