• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.336-336
• /
• 2011

Over the past decades, organic semiconductors have been investigated intensely for their potential in a wide range of optoelectronic device applications since the organic materials have advantages for very light, flexible and low cost device fabrications. In this study, we fabricated small-molecule organic solar cells (OSCs) based on chloro[subphthalocyaninato]boron(III) (SubPc) as an electron donor and $C_{60}$ as an electron acceptor material. Recently SubPc, a cone-shaped molecule with $14{\pi}$-electrons in its aromatic system, has attracted growing attention in small-molecule OSC applications as an electron-donating material for its greater open-circuit voltage (VOC), extinction coefficient and dielectric constant compared to conventional planar metal phthalocyanines. In spite of the power conversion efficiency (PCE) enhancement of small-molecule OSC using SubPc and $C_{60}$, however, the study on the interface between donor-acceptor heterojunction of this system is limited. In this work, SubPc thin films at various thicknesses were deposited by organic molecular beam deposition (OMBD) and the evolution of surface morphology was observed using atomic force microscopy (AFM) and field emission scanning electron microscopy (FE-SEM). We also investigated the influence of film thickness and surface morphology on the PCE of small-molecule OSC devices.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1216-1221
• /
• 2014

PEIT는 옥수수와 같은 재생 가능한 자원에서 유래한 isosorbide monomer를 이용하여 bio-contents를 함유하고 있는 PET이다. 하지만 isosorbide contents가 향상될수록 기계적물성이 감소하는 단점이 있다. 본 연구에서는 우수한 기계적 물성을 가지고 있는 polycarbonate를 이용하여 PEIT의 단점을 보완하고, 또한 PEIT를 이용하여 PC의 인장신율 향상을 통해 성형가공성을 개선하고자 하였다. 이축압출기를 통해 제조한 PEIT/PC 블렌드에서 polycarbonate가 모폴로지, 유리전이온도거동, 열적안정성 및 기계적 물성에 미치는 영향을 확인하기 위해 FE-SEM, DMA, TGA, UTM 및 Izod impact tester를 통하여 분석을 수행하였다. 이로써 우수한 기계적 물성을 가진 polycarbonate는 PEIT와 상용성이 있음을 확인하였으며, 특히 PEIT25PC75 조성에서 열적 안정성 및 기계적 특성의 향상이 뛰어난 것을 알 수 있었다.

• 공업화학
• /
• 제23권2호
• /
• pp.138-142
• /
• 2012

블루 안료 15 : 6이라 불리는 ${\epsilon}$ 결정상의 동프탈로시아닌(${\epsilon}$-CuPc)는 LCD 패널에서 청색화소를 제공하는 중요한 소재로써, 본 연구에서는 ${\epsilon}$-CuPc 시료를 ${\epsilon}$-CuPc 나노 입자를 seed로 이용하는 방법으로 여러 조건에서 합성하여 적합한 용매 및 온도조건 등을 규명하였고, 이를 미리 합성한 ${\alpha}$ 및 ${\beta}$ 결정상의 CuPc 시료들과 비교함으로써 ${\epsilon}$-CuPc 시료의 결정상, 결정 순도, 합성 수율 및 미세구조를 상호 비교 분석하였다. 시료들의 화학 구조 및 결정 구조는 푸레어 변환 적외선(FT-IR) 분광기 및 X선 회절 분석기(XRD)를 이용하여 각각 비교 분석하였다. 또한, 입자의 형상 및 크기는 주사 전자현미경(FE-SEM)으로 비교 분석하였고, 열적 특성은 열중량분석기(TGA)를 이용하여 비교 분석하였다.

• 한국간호교육학회지
• /
• 제4권1호
• /
• pp.7-14
• /
• 1998

The use and need of health and nutrition information on the PC communication and internet among university students at Chungbuk area were investigated. The data from 167 students from two different universities were collected and analyzed from March to May, 1998. The results are as follows. 1. Male students were 27.5% and female students were 72.5%. 2. Sixty percent and 74.7% of the students had ever used PC communication and internet, respectively. Higher proportions of male students had experiences in PC communication and internet use than fe male students. The main reasons to use PC communication and internet were 1)to obtain information and knowledge(67.4%) 2)to enjoy(10.5%), 3)to make friends or to talk(5.3%) 3. About 40% of the experienced students of the PC communication of internet obtained health or nutrition information. However, only 25% of the experienced students obtained the nutrition information from the internet. Only 10% of the students agreed that the information from the PC communication and internet was very useful. The reasons not to use the information from the PC communication and internet were 'lack of expertise of the information' and 'long response time'. Many students thought that the information provided through the computer should be improved in terms of variety and applicability to the real situation. 4. Among the 33 topics of the health and nutrition information given on the questionnaire, both male and female students had the greatest interest in stress management. The next topics in which female students had interests were diet for weight control, health problems related to menstration, dietary assessment, and cancer prevention. In male students, dietary assessment, infant nutrition management, hypertention diet were the main interests. On the basis of these results an information system on health and nutrition management during the lifecycle for Korean women will be constructed on the internet.

• 식품기술
• /
• 제11권4호
• /
• pp.49-60
• /
• 1998

Ascorbate-$Fe^3+$-EDTA에 의해 생성된 hydroxyl radical (HO.)을 이용하여 단백질과 지질의 산화적 손상을 유도하였으며, 이 손상에 대한 멜라토닌(melatonin), glutathione, $\alpha$-tocopherol의 방어효과를 분석하였다. 단백질로는 bovine serum albumin (BSA), 지질로는 phosphatidyl-choline (PC) liposome을 이용하였다. 그리고 BSA와 PC liposome의 혼합계에서도 각 항산화제의 효능을 분석하였다. 단백질의 산화적 손상은 carbonyl기의 생성 및 단백질 절단을, 지질산화는 lipid peroxidation (LPO, malondialdehyde 와 4-hydroxyalkenal) 분석을 통하여 조사하였다. 단백질의 산화는 멜라토닌과 glutathione이, 지질산화는 멜라토닌과 $\alpha$-tocopherol이 효과적으로 억제하였다. 그러나 glutathione은 지질, $\alpha$-tocopherol은 단백질의 산화를 억제하지 못하였다. BSA와 PC liposome이 동시에 존재하는 혼합물에서는 수용성과 지용성 특성을 모두 지닌 멜라토닌은 단백질, 지질 모두에 대해 산화방지효과가 있으나 수용성인 glutathione은 단백질에, 지용성인 $\alpha$-tocopherol은 지질에만 주로 효과가 있는 것으로 조사되었다.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.37-44
• /
• 2002

In order to review the failure rate of PC monitor under normal environmental conditions, we experimented for various levels of each factors, e.g Power on/off, DPM mode, using voltage, Incoming Surge, Torque strength etc. According to the results of experiment and SN ratios we investigated that the causes of the failure for the horizontal output TR of monitor are Mode change, dispersion of Torque and $h_{FE}$ and these are critical effect. For the new reliability test we suggested that strengthened part tests In IQC branch, Torque change controls in the TR specification are necessary.

• 약학회지
• /
• 제23권3_4호
• /
• pp.147-152
• /
• 1979

Experiments were carried out to investigate for the interaction between FAD solution and synthetic resin containers made of polyvinylchloride(PVC), polyethylene(PE), and polycarbonate(PC), and for the effect of glycyrrhizine or malic acid on stabilization of FAD in aqueous solution by accelerated stability analysis. Analysis of FAD was determined by means of spectrometer and by separating by paper chromatography and metal ions were detected by atomic absorption spectrophotometer, which were extracted from containers by means of Food and Additive Regulation Standard. The thermal decomposition of FAD in aqueous solution was pseudo first order reaction and it was inhibited by adding glycyrrhizine or malic into the solution. PVC, PE and PC containers accelerated the decomposition of FAD in solution. It is assumed that bivalent heavy metals in resin containers may catalize the hydrolysis of FAD. The metals detected from the containers were Ca, Zn, Cu, Fe, Pb and Cd. And the total amounts of detected metals from PVC were 6.2mcg/cm$^{2}$, PE, 5.5mcg/cm$^{2}$, and PC, 2.7mcg/cm$^{2}$ which were proportional to the rate constant of FAD decomposition in aqueous solution.

• 산업경영시스템학회지
• /
• 제24권67호
• /
• pp.69-76
• /
• 2001

In order to review the failure rate of PC monitor under normal environmental conditions, we experimented for various levels of each factors, e.g. Power on/off, DPM mode, using voltage incoming Surge, Torque strength etc. According to the results of experiment and SN ratios we investigated that the causes of the failure for the horizontal output TR of monitor are Mode change, dispersion of Torque and $h_{FE}$ and these are critical effect. For the new reliability test we suggested that strengthened part tests in IQC branch, Torque change controls in the TR specification are necessary.

• 한국강구조학회 논문집
• /
• 제29권6호
• /
• pp.435-442
• /
• 2017

모듈러 건축물을 중고층화하기 위해 횡력저항시스템은 반드시 필요한 구조 요소로 10~20층 규모에서 콘크리트 코어는 가장 전형적인 횡력저항시스템으로 알려져 있다. 습식 공법인 콘크리트 코어 공사는 모듈의 오염과 파손 가능성으로 모듈 적층과의 동시 작업이 곤란하다. 이에 모듈 적층과 콘크리트 코어의 동시 시공이 가능한 복합 PC 패널 공법을 개발하였다. 복합 PC 패널은 일정 간격을 두고 웨브가 마주보는 한 쌍의 C형강을 콘크리트 벽체의 상부와 하부에 결합한 구조 부재로 볼트로 접합하여 적층하는 건식 공법으로 콘크리트 코어를 구축할 수 있다. 이 연구에서는 복합 PC 패널이 콘크리트 벽체와 동등한 성능을 갖도록 해석을 통해 상세 개선 과정을 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.25-26
• /
• 2002