• Elastomers and Composites
• /
• 제28권2호
• /
• pp.103-107
• /
• 1993

To make new filler for conducting rubber, the sample of perovskite-related ferrite system $Dy_{2-x}Sr_{1+x}Fe_2O_{7-y}$ (x=0.0, 0.5, 1.0, 1.5, and 2.0) were synthesized at 1473K in air. $M{\ddot{o}}ssbauer$ spetrum of x=0.0 sample shows typical six line pattern with $M{\ddot{o}}ssbauer$ parameters, $I.S=3.6{\times}10^{-1}mm/sec,\;E_Q=-7.0{\times}10^{-2}mm/sec,\;H_{int}=5.19{\times}10^2\;Koe$. In case of x=2.0, the spectrum is composed of single line exhibiting coexistance of $Fe^{3+}(I.S.=3.7{\times}10^{-1}mm/sec)$ ions and $Fe^{4+}(I.S.=-1.9{\times}10^{-1}mm/sec)$ ions. With increase in x value electrical conductivity at constant temperature sharply increased and the activation energies decreased from $3.8{\times}10^{-1}\;to\;1.9{\times}10^{-1}\;eV$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.13-16
• /
• 2000

In this study, we have fabricated nonequilibrium $Fe_{85.6}Zr_{3.3}B_{5.7}Ag_{5.4}$ thin film, which contains an additional insoluble element Ag, by using DC magnetron sputtering method. We have investigated the magnetic properties of amorphous $Fe_{85.6}Zr_{3.3}B_{5.7}Ag_{5.4}$ thin film as a function of rotational field annealing(RFA). After deposition, the amorphous $Fe_{85.6}Zr_{3.3}B_{5.7}Ag_{5.4}$ thin film annealed by rotational field annealing method at $350^{\circ}C$ for an hour was founded to have high permeability of 8680 of 100 MHz, 0.2 mOe, low coercivity of 0.86 De and very low core loss of 1.3 W/cc at 1 MHz, 0.1T.

• 대한환경공학회지
• /
• 제27권7호
• /
• pp.697-703
• /
• 2005

본 연구에서는 주문진사 입경, 일차 및 이차 코팅온도, 코팅시간, 및 초기 3가철 주입농도를 변화시키면서 철을 코팅시킨 모래흡착제(Iron-Coated Sand, ICS)를 제조하였다. ICS 제조의 최적조건은 코팅효율, 코팅된 철의 안정성, 및 비소제거능 으로부터 선정하였다. 철코팅 효율은 입경이 작은 모래를 지지체로 사용하고 일차코팅온도를 높여주었을 때 뚜렷이 향상되었다. 철의 코팅효율은 이차코팅온도 및 코팅시간에는 크게 영향을 받지 않았지만 As(V) 흡착능은 이차코팅온도가 증가됨에 따라 크게 감소하는 것으로 나타났다. 이러한 결과들을 고려하여 ICS의 최적 이차코팅 조건을 $150^{\circ}C$ 온도조건과 1시간의 가열시간으로 선정하였다. Fe(III) 주입농도 변화에 따른 철 코팅효율은 0.8 Fe(III) mol/kg sand 될 때 까지는 뚜렷이 증가하였지만 그 이상에서는 큰 차이가 없었다. 기리고 Fe(III) 주입농도를 증가시킬수록 As(V) 흡착능도 증가하였으며 0.8 Fe(III) mol/kg sand 조건에서 최대값을 보여주었다. 이차 코팅온도 및 시간은 ICS 안정성의 주요변수로서 코팅온도를 높이고 코팅시간을 길게 할수록 ICS로 부터 용출되는 철의 양은 감소하였다. ICS에 대한 As(V)의 흡착은 낮은 pH에서 흡착량이 증가하는 전형적인 음이온형 흡착경향을 보여서 ICS는 강한 산성을 띄는 오염수내에 함유된 As(V)를 제거하는데 적용이 가능함을 알 수 있었다.

• 대한화학회지
• /
• 제54권5호
• /
• pp.579-581
• /
• 2010

Solid silica supported ferric chloride ($SiO_2-FeCl_3$) 촉매를 이용하여 다양한 benzimidazoles의 one-step 합성을 수행하였으며, 합성 방법이 간단하며, 화합물의 분리가 용이하며, 반응시간이 짧다.

• Journal of Magnetics
• /
• 제2권3호
• /
• pp.93-95
• /
• 1997

We investigated the temperature dependence of magnetization of Fe/Al multilayers fabricated by dc magnetron sputtering system. As the temperature increased from 5 K in a low magnetic field (100G) the magnetization of the samples increased and made a broad peak at some critical temperature. Further increase of temperature decresed the magnetization as an ardinary ferromagnetic curve. Part of samples show rapid increase of magnetization at low temperature. A model developed in this study suggests that the biquadratic coupling yields such a rapidly increasing behavior of magnetization at low temperature.

• Bulletin of the Korean Chemical Society
• /
• 제15권7호
• /
• pp.541-545
• /
• 1994

A series of samples of the ${Ca_xEu_{1-x}FeO_{3-y}$ (x=0.00, 0.25, 0.50, 0.75, and 1.00) system has been prepared at $1,250^{\circ}C$ under an atmospheric air pressure. X-ray diffraction analysis of the solid solution assigns the structure of the compositions of x=0.00, 0.25, 0.50, and 0.75 to the orthoferrite-type orthorhombic system, and that of x=1.00 to the brownmillerite-type orthorhombic one. The mole ratios of $Fe^{4+}$ ion in the solid solutions or ${\tau}$ values were determined by the Mohr's salt analysis and nonstoichiometric chemical formulas of the system were formulated from x, ${\tau}$, and y values. From the result of the Mossbauer spectroscopy, the coordination and magnetic property of the iron ion are discussed. The electrical conductivities are measured as a function of temperature. The activation energy is minimum at the composition of x=0.25. The conduction mechanism can be explained by the hopping of electrons between the mixed valences of $Fe^{3+}\;and\;Fe^{4+}$ ions.

• 한국재료학회지
• /
• 제11권1호
• /
• pp.3-7
• /
• 2001

$Ni_{1+x}/Ti_{x}Fe_{2-2x}O_4$계 시료중 스피넬의 단일상만 존재하는 x값이 0~0.7인 시료에 대한 Mossbauer 스펙트럼을 측정 분석하였다. $0{\leqq}x{\leqq}0.3$인 시료에서는 두 site의 $Fe^{3+}$ 이온에 의한 두 개의 6선 흡수선이 나타났고, $0.4{\leqq}x{\leqq}0.6$인 시료에서는 두개의 6선 흡수선과 2선 흡수선이 공존하였으며, x=0.7인 시료는 2선 흡수선만 나타났다. x값의 증가에 따라 6선 흡수선의 A-site 공명 흡수 면적이 B-site에 비해 상대적으로 커지고, 2선 홀수선의 공명 흡수면적도 6선 흡수선에 비해 커지는 것을 알 수 있었다. Mossbauer parameter중 이성질체 이동치 (I.S.)는 A-site의 경우에는 x값의 증가에 따라 커지는 반면 B-site는 큰 영향을 주지 않았고, 사중극자 분열치 (Q.S.)의 변화는 볼 수 없었으며, 두 Site의 미세자기장 ($H_{hf}$)은 X값의 증가에 따라 모두 감소하였다. 이러한 실험 결과로부터 시료의 금속 양이온 분포식을 구하였고, X값의 증가는 A-Site의 $Fe^{3+}-O^{2-}$ 결합의 공유 결합성을 약화시키는 반면 B-Site의 $Fe^{3+}O^{2-}$ 결합에는 큰 영향을 주지 않으며, 또한 X값의 증가에 따라 $Fe^{3+}\;_A-O^{2-}\;-Fe^{3+}\;_B$ 결합의 수가 감소하여 A-B 초교환 상호 작용이 약화되는 것을 알 수 있었다.

• 소성∙가공
• /
• 제31권3호
• /
• pp.124-128
• /
• 2022

NdFeB magnets have been positioned as the core materials in advanced technologies such as MRI (magnetic resonance imaging), FA (factory automation system), robot, motors, and so on based on the highest magnetic properties. To effectively improve the refined microstructure, the plastic deformation has been known as the good alternatives by the recrystallization. However, it has been regarded as being impossible because of the few slip systems in the RE-Fe-B magnets at room temperature. The purpose of this study was to investigate the possibility of control of grain refinement and magnetic anisotropy of NdFeB alloy powder by the severe plastic deformation. The NdFeB magnet powder was fabricated by gas atomization process, and the powder was pre-compacted at high temperature. The pre-compacted billets were deformed by HPT (high pressure torsion), and then the deformed billets were observed microstructure and magnetic properties. After the HPT process at room temperature, the grain size decreased with increasing because of the melted Nd-rich phase, and the anisotropy of Nd₂Fe₁₄B phase was formed after the HPT process.

• 한국수처리학회지
• /
• 제26권6호
• /
• pp.13-26
• /
• 2018

This research was conducted to elucidate the removal mechanism of heavy metals and sulfate ion from acid mine drainage(AMD) by porous zeolite-slag ceramics (ZS ceramics) packed in a column reactor system. The average removal efficiencies of heavy metals and sulfate ion from AMD by the 1:3(Z:S) porous ZS ceramics in the column reactor under the HRT condition of 24 hours were Al 97.5%, As 98.8%, Cd 86.1%, Cu 96.2%, Fe 99.7%, Mn 64.1%, Pb 97.2%, Zn 66.7%, and $SO_4{^{2-}}$ 76.0% during 121 days of operation time. The XRD analysis showed that the ferric iron from AMD could be removed by adsorption and/or ion-exchange on the porous ZS ceramics. In addition it was known that Al, As, Cu, Mn, and Zn could adsorb or coprecipitate on the surface of Fe precipitates such as schwertmannite, ferrihydrite, or goethite. The EDS analysis revealed that Al, Fe, and Mn, which were of relatively high concentration in the AMD, would be adsorbed and/or ion-exchanged on the porous ZS ceramics and also exhibited that Al, Cu, Fe, Mn, and Zn could be precipitated as the form of metal hydroxide or sulfate and adsorbed or coprecipitated on the surface of Fe precipitates. The microscopic results on the porous ZS ceramics and precipitated sludge in a column reactor system suggested that the heavy metals and sulfate ion from AMD would be eliminated by the multiple mechanisms of coprecipitation, adsorption, ion-exchange as well as precipitation.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권5호
• /
• pp.1-10
• /
• 2015

FeS, as a natural reduced iron mineral, has been recognized to be a viable reactive material for As(III) sequestration in natural and engineered systems. In this study, FeS-coated sand packed columns were tested to evaluate the As(III) removal capacities under anaerobic conditions at pH 5, 7 and 9. The column obtained As(III) removal capacity was then compared with the capacity result obtained from batch reactors. In the comparison, two different approaches were used. The first approach was used the total As(III) removal capacity which method was proved to be useful for interpreting pH 5 system. The second approach was used to consider sorption non-linearity and proved to be useful for interpreting the pH 9. The results demonstrated that a mechanistic understanding of the different removal processes at different pH conditions is important to interpret the column experimental results. At pH 5, where the precipitation of arsenic sulfide plays the major role in the removal of arsenic, the column shows a greater removal efficiency than the batch system due to the continuous dissolution of sulfide and precipitation of arsenic sulfide. At pH 9, where adsorption mainly governs the arsenic removal, the sorption nonlinearity should be considered in the estimation of the column capacity. This study highlighted the importance of understanding reaction mechanism to predict column performance using batch-obtained experimental results.