• Journal of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.464-475
• /
• 1988

The complex formation of p-aminoazobenzene and its derivatives with Fe(III) and Mn(II) has been studied by UV and IR spectroscopy and conductometry. The effects of solvents, donor basicity, and other factors on the formation of these complexes have been examined. The vatio of metal to ligand for the complexes formed is 1 : 1, both in the solid state and in solution. The stability constants of Fe(III)-donor and Mn(II)-donor complexes are in the range of 10$^2$∼10$^4$ and 0.1∼1, respectively. The absorptivities are ~10$^4$ and ∼10$^3$ l/mol${\cdot}$cm respectively. Thermodynamic properties such as ${\Delta}H^{\circ}$, ${\Delta}G^{\circ}$ and ${\Delta}S^{\circ}$ are calculated from their stability constants utilizing Van't Hoff equation.

• Journal of the Korean Magnetics Society
• /
• v.2 no.3
• /
• pp.233-238
• /
• 1992

Melt-spun $Nd_{14}Fe_{76}Co_4B_6$ and $Nd_{10.5}Fe_{79}Co_2Zr_{1.5}B_7$ ribbons were prepared under an externally applied magnetic field. Magnetic properties in terms of anisotropy were evaluated by discussing the effect of textured structure of the ribbon samples as well as its powders. About 32 % increase in $(B{\cdot}H)_{max}$ and 18.8 % increase in $B_r$ were observed along the perpendicular direction of the ribbon plane which is more prominent for the Nd-Fe-Co-Zr-B than for the Nd-Fe-Co-B alloy. The enhancement of magnetic anisotropy was monitored by measuring the anisotropy constant of each alloy as a function of quenching rate of the ribbon. It was found that for the melt-spun ribbon quenched at slow rate(less than 7 m/s) the magnetic field effect was overwhelmed by the heat gradient effect through the ribbon thickness while the field effect was prominent at intermediate quenching rate (more than 7~11 m/s). The reproducible maximum energy product, $(B{\cdot}H)_{max}$=16.4 MGOe can be obtained from the Nd-Fe-Co-Zr-B alloy.

• Journal of the Korean Magnetics Society
• /
• v.1 no.1
• /
• pp.1-5
• /
• 1991

The magnetic properties of the polycrystalline ${(Fe_{2}O_{3})}_{1-x-y}{(In_{2}O_{3})}_{x}{(Eu_{2}O_{3})}_{y}$(x=0.01, y=0.02과 x=0.02, y=0.03) have been studied by the methods of X-ray diffraction, $M\"{o}ssbauer$ effect, and magnetic hysteresis measurement. The X-ray diffraction patterns show that the samples have a same crystal structure as $\alpha-Fe_{2}O_{3}$. From the analysis of the temperature dependence of the quadrupole splitting and average half-width, it is found that the Morin transition occurs in the sample of x=0.01 and y=0.02 and the spin angle defined as the angle between the [111] crystal axis and antiferromagnetic vector, changes from about $35^{\circ}$ to the (111) plane as increasing the temperature in the sample of x=0.02 and y=O.03. The temperature dependence of magnetic hyperfine field is analyzed by using the spin-wave theory. The isomer shift values at room temperature are found to be given by about 0.35mm/s for the samples which means that the Fe ions belong to $3^{+}ion$. The temperature dependence of isomer shift was analyzed by using the Debye model.

• Transactions of Materials Processing
• /
• v.22 no.5
• /
• pp.275-279
• /
• 2013

The tube hydroforming process has received much attention in the automotive industry because of its advantages compared to conventional manufacturing technologies. A wide range of products such as sub-frames, camshafts, radiator frames, axles and crankshafts are made by hydroforming process. The hydroformed parts often need to be structurally joined to other components during assembly. Therefore, these automotive parts need to be manufactured with a localized attachment flange. In this study, FE forming analyses of a part with a rectangular flanged shape was performed with Dynaform 5.5. Using the optimized conditions determined numerically, hydroforming experiments were performed. Then, the characterization of defects was analyzed. Finally, the accuracy of the optimized internal pressure condition as well as that of the initial ram position were evaluated. The results demonstrated that flanged parts can be successfully produced using the tube hydroforming process.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.680-687
• /
• 1999

Fe-Al intermetallic compounds were manufactured by using the field-activated combustion synthesis process. Effects of chemical composition(Fe:Al= 3: 1,2:1, 1:1, 1:2, 1:3), Compaction pressure(150, 250, 350MPa) and electrical resistance on the reaction were investigated in this system. As the molar ratio of Al, compaction pressure and electric field increased, the combustion temperature and velocity were increased. The influences for reaction with current adjust way were investigated in this system. But in the absence of a electric field, the reaction could sustain a nonsteady combustion wave and was not completed. The reaction products were characterized with X-ray, SEM and EDXS to determine the structure and composition.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.3
• /
• pp.52-64
• /
• 2021

The effect of Fe and BO₃ doping on structure, thermal, and electrical properties of Li_1+xFe_xTi_2-x(PO₄)_3-y(BO₃)_y (x = 0.2, 0.5)-based glass and glass ceramics was investigated. In addition, their crystallization behavior during sintering and ionic conductivity were also investigated in terms of sintering temperature. FT-IR and XPS results indicated that Fe²⁺ and Fe³⁺ ions in Li_1+xFe_xTi_2-x(PO₄)_3-y(BO₃)_y glass worked as a network modifier (FeO₆ octahedra) and also as a network former (FeO₄ tetrahedra). In the case of the glass with low substitution of BO₃, boron formed (PB)O₄ network structure, while boron preferred BO₃ triangles or B₃O₃ boroxol rings with increasing the BO₃ content owing to boic oxide anomaly, which can result in an increased non-bridging oxygen. The glass transition temperature (GTT) and crystallization temperature (CT) was lowered as the BO₃ substitution was increased, while Fe²⁺ lowered the GTT and raised the CT. The ionic conductivity of Li_1+xFe_xTi_2-x(PO₄)_3-y(BO₃)_y glass ceramics were 8.85×10^-4 and 1.38×10^-4S/cm for x = 0.2 and 0.5, respectively. The oxidation state of doped Fe and boric oxide anomaly were due to the enhanced lithium ion conductivity of glass ceramics.

• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.22-35
• /
• 1995

In this study, crystal structures and magnetic properties of as-ast, annealed and rapidly solidified Mn-A1-M( M=Cu, Fe) alloys have been investigated. In $Mn_{0.56}Al_{0.44}$ alloys, the largest fraction of $\tau$ phase and values of magnetic properties was obtained in Mnl, i6Alo or alloy. And this alloy was used as the basic composition. In $Mn_{0.56-X}M_{X}Al_{0.44}$ alloys, when annealed, $\tau$- and $\beta$-Mn phase appeared at x< 0.08, $\tau$- and $\kappa$ phase at 0.10 $\leq x \leq$ 0.12 and $\kappa$- phase only at 0.15 $\leq x \leq$0.20 . When rapidly solidified, specimens showed similar phases as when annealed except that $\varepsilon$ phase appeared at x=0.04. In Mnu FexAlo 44 alloys, asyast specimens showed $\tau$-, $\beta$-Mn and $\gamma_2$- phase at x<0.08 and K and $\beta$-Mn phase at x>0.10. When rapidly solidified, Mn-Fe-Al specimens showed $\varepsilon$-, $\gamma_2$- and small amount of $\tau$- and $\kappa$ phase at x<0.08 and $\kappa$- phase only at 0.$\leq x \leq$0.20. All the alloys investigated were ferromagnetic. The Curie temperature of annealed specimens and rapidly solidified of Mno 5sAlu 44 alloy were -650K and -644K. Spontaneous magnetization( UII of annealed and rapidly solidified specimens were 40-45 (emu/g) and 50-52(emu/g), respectively. Remanent (M,) to saturation magnetization( Ms) ratio was -0.7. M, of rapidly solidified specimen was about 48(emu/g). Magnetic properties of $Mn_{0.56}Al_{0.44}$ alloys were found to be determined by the relative fraction of ferromagnetic r- and K- phase. When M= Cu and x=0.15, maximum as($\sigma_{0.0}$) was obtained by about 64.3 emu/g), and when M=Fe and x=0.15, 66.4( emu/g). The Curie temperature decreased as x increased.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.808-815
• /
• 1995

The magnetic states of nonstoichiometric substituted ferrite Fe$_{}1.429$(Al$_{4-x}$ Ga$_{x}$)$_{0.286}$ Si$_{0.143}$ /O$_4$ system have been investigated using Mossbauer spectroscopy and SQUID. The Mossbauer spectra at room temperature show well-defined two Zeeman patterns for x=0.2, superpositions of two Zeeman patterns and a doublet for x=0.4. The doublet peak seems to be originated from the superparamagnetic clusters. The system shows significant departures from the Neel's collinear model and seems to be the diluted ferrites. The Mossbauer spectra below R.T show various and complicated patterns, which can be explained by freezing of the superparamagnetic clusters. On cooling, magnetic states of the system may be various and multicritical, Resulting from SQUID measurements, there was an unexpected dip in magnetization curves below 50K. It was interpreted as an effect of spin canting including spin freezing or collective spin behavior.

• Journal of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.309-314
• /
• 1989

A kinetic study was carried out for the redox reaction of cis-$[Co(en)_2(N_3)_2]^+$ with Fe(II) in acidic solution by spectrophotometric methods. This redox reaction system have been found to show a third order for overall reaction as the respective first order with respect to reactant cis-$[Co(en)_2(N_3)_2]^+$, Fe(II), and $H^+$ catalyst. The activation parameters, ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$, were obtained as 14.2Kcal/mol and -16.7 e.u., respectively. On the basis of the kinetic data, we suggest that the redox reaction system proceeds via inner sphere mechanism. The rate equation derived from the proposed mechanism is in agreement with the observed rate equation.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).