• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.312-319
• /
• 2017

국내 부존 청광 규조토의 고부가가치 활용을 위해 물리적인 불순물 정제 및 정제 규조토 중의 SiO2 성분을 규소원으로 한 탄화규소 분말합성에 대해 연구하였다. 청광 규조토를 hammer mill을 이용해서 분쇄한 후 체가름을 통한 입도 분리에 의해서 약 30% 정도의 철분 ($Fe_2O_3$) 정제 효과를 얻을 수 있었으며, 325 mesh 이하 입도 분말의 철분 함량은 약 2% 이었다. 습식 및 건식 자력선별의 경우 모두 철분 함량의 분리 및 정제 효과가 일부 있었지만 회수되는 비자성 부산물 중의 철분 함량이 약 2%로 잔존양이 많음을 알 수 있었다. 청광 원광의 물 침출은 철분 제거에 효과적이었으며, 물 침출 결과 약 40% 정도의 철분이 제거되었다. 또한 정제 규조토 중의 $SiO_2$ 성분을 탄소 (흑연, 카본블랙)로 환원 탄화 반응시켜 ${\beta}$-SiC를 합성하였고, 합성 분말의 산처리를 통한 철분 정제 및 비표면적 변화 등에 대해 연구하였다. 환원제로 흑연보다는 카본블랙을 사용함이 보다 효과적이었고, 산처리공정에 의해 Fe, Ca 등의 불순물들이 거의 제거되었고, 비표면적은 $52.5m^2/g$ 까지 증가하였다.

• 한국분말재료학회지
• /
• 제10권5호
• /
• pp.344-347
• /
• 2003

Pure tantalum powder has been produced by combining Na as a reducing agent, $K_2$TaF$_{7}$ as feed material, KCl and KF as a diluent in a stainless steel (SUS) bomb, using the method of metallothermic reduction. And we examined various types of after-treatment that affect the high purification of powder. A significant amount of impurities contained in recovered powder was removed in various conditions of acid washing. In particular, 20% (HCl + HNO$_3$) was effective in removing heavy metal impurities such as Fe, Cr and Ni, 8% H$_2$SO$_4$ + 8% $Al_2$(SO$_4$)$_3$ in removing fluorides such as K and F from non-reactive feed material, and 2% $H_2O$$_2$ + 1 % HF in removing oxides that formed during reaction. Significant amounts of oxygen and part of light metal impurities could be removed through deoxidation and heat treatment process. On the other hand, because it is difficult to remove completely heavy metal impurities such as Fe, Cr, and Ni through acid washing or heat treatment process if their contents are too high, it is considered desirable to inhibit these impurities from being mixed during the reduction process as much as possible.

• 소성∙가공
• /
• 제10권2호
• /
• pp.151-159
• /
• 2001

Flow defect of a piston-pin for automobile parts is investigated in this study. In combined cold extrusion of piston-pin, lapping defect, which is a kind of flow defect, appears by the dead metal zone. This appearance evidently happens in products with a thin thickness to be pierced for the dimensional accuracy and the decrease of material loss. The flow defect that occurs in piston-pin has bad effects on the strength and the fatigue life of piston-pin. Therefore, it is important to predict and prevent defects in the early stage of process design. The best method that can prevent flow defect is removing or reducing dead metal zone through material flow control. The finite element simulations are applied to analyze the flow defect. This study proposes processes for preventing flow defect by removing dead metal zone. Then the results are compared with the experimental ones for verification. These FE simulation results are in good agreement with the experimental ones.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.155-158
• /
• 2000

Flow defect of a piston-pin for automobile parts is investigated in this study. In cold forging of piston-pin Lapping defect a kind of flow defect appears by the dead metal zone. This appearance evidently happens in products with a thin piercing thickness for the dimension accuracy and the decrease of material loss. The best method that can prevent flow defect is removing dead metal zone. The finite element simulations are applied to analyze the flow defect. This study proposed processes for preventing flow defect by removing dead metal zone. Then the results are compared with the experiments for verification. These FE simulation results are in good agreement with the experimental ones.

• Corrosion Science and Technology
• /
• 제7권3호
• /
• pp.158-161
• /
• 2008

It is well known that iron is one of the most common impurity elements found in aluminum and its alloys. Iron in the aluminum forms an intermetallic compounds such as $FeAl_3$. The $FeAl_3$ particles on the aluminum surface are one of the most detrimental phases to the corrosion process and anodizing procedure for aluminum and its alloys. Trial and error surface treatment will be carried out to find the preferential and effective removal of $FeAl_3$ particles on the surfaces without dissolution of aluminum matrix around the particles. One of the preferable surface treatments for the aim of getting $FeAl_3$ free surface was an electrochemical treatment such as cathodic current density of $-2kAm^{-2}$ in a 20-30 mass% $HNO_3$ solution for the period of 300s. The corrosion characteristics of aluminum surface with $FeAl_3$ free particles are examined in a $0.1kmol/m^3$ NaCl solution. It is found that aluminum with free $FeAl_3$ particles shows higher corrosion resistance than aluminum with $FeAl_3$ particles.

• Bulletin of the Korean Chemical Society
• /
• 제9권2호
• /
• pp.87-94
• /
• 1988

The substitution reaction of Fe$(CO)_5$ by ethylene has been studied for plausible intermediates by means of extended Huckel calculations. Among various reaction mechanisms the favorable reaction pathway is via a dissociative mechanism in which ethylene approaches to Fe$(CO)_4$ unit. For Fe$(CO)_4$ fragment, the square planar conformation is found to be the most stable form by the extended Huckel calculations. Our calculations show that ethylene attacks square planar intermediate formed by removing one carbonyl from Fe$(CO)_5$ and then the unstable species thus formed is distored to the most stable trigonal bipyramid with the ethylene lying in the equatorial plane.

• 한국광물학회지
• /
• 제27권4호
• /
• pp.207-222
• /
• 2014

폐-광석으로부터 금속구리분말을 회수하기 위하여 더미 미생물용출, Fe 제거와 전기분해실험을 수행하였다. Cu가 0.034% 함유된 폐-광석시료에 대하여 더미 용출실험을 수행한 결과, Cu 용출률은 박테리아 용출-용액에서 61%, 황산 용출-용액에서 62%로 나타났다. Fe를 효과적으로 제거하기 위하여 더미 용출-용액에 NaOH, $H_2O_2$ 및 $Ca(OH)_2$를 각각 적용한 결과 $H_2O_2$가 가장 효과적인 Fe 제거제로 선정되었다. 전해질 용액을 준비하기 위하여 $H_2O_2$를 더미 용출-용액에 처리한 결과 박테리아 용출-용액에서 Fe가 99%, 황산 용출-용액에서 60%로 제거된 반면에 Cu 제거율은 각각 5%와 7%로 나타났다. 이 용액에 대하여 전기분해 실험을 수행한 결과 Cu 회수율이 박테리아 용출-용액에서 98%, 황산 용출-용액에서 76%로 나타났다. 모수석 형태의 금속구리분말이 양쪽 용출-용액에서 회수되었다.

• 환경위생공학
• /
• 제15권3호
• /
• pp.62-69
• /
• 2000

In point of recycling wastes, batch test was conducted to examine the neutralization and Fe removal from laboratory wastewater using wastes. Oyster shell and slag had a buffer capacity to neutralize an acidic wastewater but tire rubber didn't. With increasing reaction time, dosage and agitation speed, Fe was well removed by wastes. As a result on the experiments of Freundlich isotherm, the adsorption intensities(1/n) were 0.32∼0.46 and the adsorption capacities(k) were 4.3∼4.6 for removing Fe from laboratory wastewater by wastes. In view of these results, it was estimated that wastes containing the similar compositions as these could utilize the neutralization and adsorption of heavy metals in laboratory wastewater.

• The Korean Journal of Ecology
• /
• 제26권2호
• /
• pp.65-70
• /
• 2003

Shihwa tidal freshwater marsh was constructed recently to treat pollutants entering Shihwa lake. In this study, we examined the spatial and temporal patterns of heavy metal accumulation in soils of Shihwa marsh and sought correlations between several soil variables (pH, electrical conductivity, organic matter, and acid ammonium oxalate-extractable Fe and Al contents) and the heavy metal concentration of soils. Surface soil samples (0∼20 cm) were collected in June 2000, November 2000, and July 2001, and were analyzed for heavy metals (Zn, Cd, Pb, Cu, Cr, As, and Hg) and soil chemical properties. The neutral pH and water-saturated conditions of Shihwa marsh appeared to favor immobilization of heavy metal through adsorption onto soils. The concentrations of heavy metal (especially Zn, Cu, and Cr) in soils of Shihwa marsh increased along the sampling occasions, suggesting that soils of Shihwa marsh serve as a sink of heavy metal. Among the sub-marshes, metal concentrations were highest in Banweol high marshes and lowest in Samhwa marshes. The temporal and spatial variations in the heavy metal concentrations of soils were correlated positively with organic matter and oxalate extractable Fe and Al contents, but negatively with electrical conductivity. These results suggest that organic matter and hydrous oxide of Fe/Al may playa key role in removing heavy metals in soils of Shihwa marsh, and that heavy metal removing capacity would increase with desalinization. However, the removal patterns of heavy metal by reeds warrant further studies to evaluate the total removal capacity of heavy metals by Shihwa marsh.

• 한국자기학회지
• /
• 제17권3호
• /
• pp.137-140
• /
• 2007

레이저 간섭 석판 장비(Laser Interference Lithography; LIL)를 이용하여, Anodic Aluminum Oxide(AAO) 나노기공의 배열을 향상 시켰다. 이후 진공에서 Fe와 Cu를 AAO/Si에 성장하고, AAO를 제거하여 Cu/Fe(20 nm) 나노구조를 제작하였다. AAO의 나노기공과 나노구조는 전처리 과정에서 제작된 PR(photoresist) 나노선을 따라 1차원으로 배열되었다. 자성 나노구조의 자기이력곡선으로부터 이들이 vortex 구조를 가지며, 쌍극자 상호작용이 지배적임을 확인하였다.