• Journal of the Korean earth science society
• /
• v.43 no.6
• /
• pp.749-761
• /
• 2022

As the number of National and UNESCO Global Geoparks has increased, awareness of geological heritage and local government interests have also increased. In this study, data from the geological heritage sites in the Ulsan area were summarized, a practical use plan for geological heritage was prepared based on the assessment results, and the expected effects were also presented. The value for 33 of 112 geological heritage sites identified through literature surveys was evaluated. In terms of the geological heritage types in Ulsan, there were two geological, one geomorphological, and thirty mixed-heritage sites. In the context of the geological heritage of Ulsan, rivers and coastal topography were found to be dominant, and various geomorphological and geological features, such as fossils, folds, faults, shear zones, minerals, and ore deposits are included. Based on the assessment results, there were three, eighteen, nine, and three sites in Classes I, II, III, and IV, respectively. Considering the intrinsic and subsidiary values of geological heritage, the Gangdong Coast, Jujeon Coast, Taehwagang area, Daewangam area, the Daegokri-Cheonjeonri track sites, and Mujechineup are likely to be listed as potential geosites. When the endorsement of the geopark has been promoted alongside these geosites, it can contribute to the sustainable preservation and maintenance of the geosites, satisfy the demand for science education through geo-education, and support the sustainable development of the local economy following the detailed standards for geopark certification in the Natural Parks Act. This is expected to increase the brand value of Ulsan Metropolitan City.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.41-49
• /
• 2006

This paper demonstrates the feasibility of using shallow S-wave, high-resolution seismic reflection surveys to characterize geological structure and stratigraphy of basement rocks for civil engineering purposes. S-wave seismic reflections from depths less than 20 m were recorded along the top of steep readout slopes. Seismic reflection data were recorded using a standard CDP acquisition method with a 24-channel seismograph and a sledge-hammer SH-wave source. The data were acquired using a split-spread source-receiver geometry with a 2 m shot-and-receiver interval, and then were processed to enhance S/N ratio of the data, to improve resolvable power of the seismic section, and to get velocity information of the basement rock. The final seismic reflection profiles using the CDP technique has imaged surfaces as shallow as less than 1m and resolved beds as thin as 1m. The migrated reflection sections possess sufficient quality to correlate the prominent reflection events to the bedding planes and faults identified on the readout outcrops. Similar S-wave reflection surveys could also be used to produce the necessary details of a geological structure of shallow bedrocks to pinpoint optimum locations for monitor wells of civil engineering purposes.

• Journal of the Daesoon Academy of Sciences
• /
• v.23
• /
• pp.1-36
• /
• 2014

The purpose of this study is to research the religious-ethical meaning of the scripture (Jeongyung, 典經) of Daesoonjinrihoe, one of religious orders in Korea. It is 'the reorganizing in the order of heaven and earth' (ROHE, 天地公事)that the believers of Daesoonjinrihoe regard as the essence and basis of their religious belief in Jeongyung, and so I focus on it in this paper. And I have applied the method of religious ethics that recognize the relation religion and morality for understanding religious-ethical meaning of moral principles and norms. In the process of this study I have selected a lot of moral principles, norms and activities in ROHE, and sorted them with their social context of ROHE. In this research I have found some characteristics of ethical norms in the ROHE according to three divisions of ethical category such as personal, social and natural ethics. The understanding of mind is an important point of personal ethic in the ROHE. The mind is understood as the subject and object of personal ethical attitude and volition. So one could have ethical attitude by oneself with mind as subject, and reflect and correct on his ethical faults with the mind as ethical object. The distinctiveness of social ethic in the ROHE is special concerns to the weak at that time such as sick person, illegitimate children, shamans, farmhands and etc. This is a logical consequence of the ethical altruism of the ethic of mutual beneficence(相生) and the dignity of human(人尊) in ROHE. And the ethics of mutual beneficence is applied to natural ethic of ROHE. Since natural world including all sort of plants and animals is intimately related to the human worlds, so it is a desirable attitude for to accommodate to the changes of nature. Even if these characteristics of ethics in ROHE are justified by the religious beliefs, the norms from them are available in our religious pluralistic societies, since they have common ethical values of other religious ethics. It is my concluding remark that religious orders or denominations have to offer a lot of moral norms suitable to religious pluralistic situation. Because it is needed for our society to conquer various sort and kind conflicts among religions, and to act harmoniously together for public peace.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.268-274
• /
• 2023

Finite source inversion is performed with a Green's function matrix and geodetic coseismic displacement. Conventionally, the Green's function matrix is constructed using the Okada model (Okada, 1985). However, for more realistic earthquake simulations, recent research has widely adopted the physics-based model, which can consider various material properties such as elasticity, viscoelasticity, and elastoplasticity. We used the physics-based software PyLith, which is suitable for earthquake modeling. However, the PyLith does not provide a mesh generator, which makes it difficult to perform finite source inversions that require numerous subfaults and observation points within the model. Therefore, in this study, we developed CPInterface (COMSOL-PyLith Interface) to improve the convenience of finite source inversion by combining the processes of creating a numerical model including sub-faults and observation points, simulating earthquake modeling, and constructing a Green's function matrix. CPInterface combines the grid generator of COMSOL with PyLith to generate the Green's function matrix automatically. CPInterface controls model and fault information with simple parameters. In addition, elastic subsurface anomalies and GPS observations can be placed flexibly in the model. CPInterface is expected to enhance the accessibility of physics-based finite source inversions by automatically generating the Green's function matrix.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.10
• /
• pp.445-454
• /
• 2023

Recently, various fault diagnosis studies are being conducted utilizing data from collaborative robots. Existing studies performing fault diagnosis on collaborative robots use static data collected based on the assumed operation of predefined devices. Therefore, the fault diagnosis model has a limitation of increasing dependency on the learned data patterns. Additionally, there is a limitation in that a diagnosis reflecting the characteristics of collaborative robots operating with multiple joints could not be conducted due to experiments using a single motor. This paper proposes an LSTM diagnostic model that can overcome these two limitations. The proposed method selects representative normal patterns using the correlation analysis of vibration and current data in single-axis and multi-axis work environments, and generates residual patterns through differences from the normal representative patterns. An LSTM model that can perform gear wear diagnosis for each axis is created using the generated residual patterns as inputs. This fault diagnosis model can not only reduce the dependence on the model's learning data patterns through representative patterns for each operation, but also diagnose faults occurring during multi-axis operation. Finally, reflecting both internal and external data characteristics, the fault diagnosis performance was improved, showing a high diagnostic performance of 98.57%.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.233-257
• /
• 2023

Asbestos minerals are found at rocks and soils of the Hongseong and Bibong serpentine mines, western part of Chungnam. The area consists of and metasediment, and Mesozoic igneous intrusives with minor age-known gneiss complexes and Mesozoic sediments. With detailed geological investigations, rock samples for the serpentinite and amphibolite areas are collected at sites containing asbestos. Representative asbestos and rock samples are analysed by PLM, XRD, SEM and EPMA. Serpentinites are found as steeply dipping faults with adjacent gneiss complex to the NNE direction. Repeated alteration, including serpenitization and talcification, is found at the emplacement direction for the serpentinite body. Amphibollites occur as intrusives and stratiforms within the Precambrian gneiss complex. Serpentinite and amphibolite (or amphibole schist) contain amphiboles either as asbestiform or non-asbestiform. Varying amounts of asbestos minerals, including chrysotile, tremolite asbestos and actinolite asbestos, are found within the serpentinites. The asbestos minerals are found near the cracks or fractures and along the bedding plane. They occur as cross fiber, slip fiber and mass fiber types. Varying amounts of amphibole asbestos minerals, such as tremolite and actinolite asbestos, are found within amphibolites and as a mass fiber type. Overall results suggest that rocks of the serpentine mines contain serpentine and amphibole type asbestos minerals originated from the hydrothermal alteration. Considering construction nearby the mines and environmental risks by the asbestos, additional land management plans are required.

• The Korean Journal of Applied Statistics
• /
• v.37 no.3
• /
• pp.323-338
• /
• 2024

This study analyzes the Korean professional volleyball league and predict match outcomes using popular machine learning classification methods. Match data from the 2012/2013 to 2022/2023 seasons for both male and female leagues were collected, including match details. Two different data structures were applied to the models: Separating matches results into two teams and performance differentials between the home and away teams. These two data structures were applied to construct a total of four predictive models, encompassing both male and female leagues. As specific variable values used in the models are unavailable before the end of matches, the results of the most recent 3 to 4 matches, up until just before today's match, were preprocessed and utilized as variables. Logistc Regrssion, Decision Tree, Bagging, Random Forest, Xgboost, Adaboost, and Light GBM, were employed for classification, and the model employing Random Forest showed the highest predictive performance. The results indicated that while significant variables varied by gender and data structure, set success rate, blocking points scored, and the number of faults were consistently crucial. Notably, our win-loss prediction model's distinctiveness lies in its ability to provide pre-match forecasts rather than post-event predictions.

• Proceedings of the KSEEG Conference
• /
• 2001.05b
• /
• pp.42-63
• /
• 2001

The detail survey on the Songsanri tomb site including the Muryong royal tomb was carried out during the period from May 1 , 1996 to April 30, 1997. A quantitative analysis was tried to find changes of tomb itself since the excavation. Main subjects of the survey are to find out the cause of infiltration of rain water and groundwater into the tomb and the tomb site, monitoring of the movement of tomb structure and safety, removal method of the algae inside the tomb, and air controlling system to solve high humidity condition and dew inside the tomb. For these purposes, detail survery inside and outside the tombs using a electronic distance meter and small airplane, monitoring of temperature and humidity, geophysical exploration including electrical resistivity, geomagnetic, gravity and georadar methods, drilling, measurement of physical and chemical properties of drill core and measurement of groundwater permeability were conducted. We found that the center of the subsurface tomb and the center of soil mound on ground are different 4.5 meter and 5 meter for the 5th tomb and 7th tomb, respectively. The fact has caused unequal stress on the tomb structure. In the 7th tomb (the Muryong royal tomb), 435 bricks were broken out of 6025 bricks in 1972, but 1072 bricks are broken in 1996. The break rate has been increased about 250% for just 24 years. The break rate increased about 290% in the 6th tomb. The situation in 1996 is the result for just 24 years while the situation in 1972 was the result for about 1450 years. Status of breaking of bircks represents that a severe problem is undergoing. The eastern wall of the Muryong royal tomb is moving toward inside the tomb with the rate of 2.95 mm/myr in rainy season and 1.52 mm/myr in dry season. The frontal wall shows biggest movement in the 7th tomb having a rate of 2.05 mm/myr toward the passage way. The 6th tomb shows biggest movement among the three tombs having the rate of 7.44mm/myr and 3.61mm/myr toward east for the high break rate of bricks in the 6th tomb. Georadar section of the shallow soil layer represents several faults in the top soil layer of the 5th tomb and 7th tomb. Raninwater flew through faults tnto the tomb and nearby ground and high water content in nearby ground resulted in low resistance and high humidity inside tombs. High humidity inside tomb made a good condition for algae living with high temperature and moderate light source. The 6th tomb is most severe situation and the 7th tomb is the second in terms of algae living. Artificial change of the tomb environment since the excavation, infiltration of rain water and groundwater into the tombsite and bad drainage system had resulted in dangerous status for the tomb structure. Main cause for many problems including breaking of bricks, movement of tomb walls and algae living is infiltration of rainwater and groundwater into the tomb site. Therefore, protection of the tomb site from high water content should be carried out at first. Waterproofing method includes a cover system over the tomvsith using geotextile, clay layer and geomembrane and a deep trench which is 2 meter down to the base of the 5th tomb at the north of the tomv site. Decrease and balancing of soil weight above the tomb are also needed for the sfety of tomb structures. For the algae living inside tombs, we recommend to spray K101 which developed in this study on the surface of wall and then, exposure to ultraviolet light sources for 24 hours. Air controlling system should be changed to a constant temperature and humidity system for the 6th tomb and the 7th tomb. It seems to much better to place the system at frontal room and to ciculate cold air inside tombs to solve dew problem. Above mentioned preservation methods are suggested to give least changes to tomb site and to solve the most fundmental problems. Repairing should be planned in order and some special cares are needed for the safety of tombs in reparing work. Finally, a monitoring system measuring tilting of tomb walls, water content, groundwater level, temperature and humidity is required to monitor and to evaluate the repairing work.

• Economic and Environmental Geology
• /
• v.48 no.2
• /
• pp.103-114
• /
• 2015

Jinsan gold deposit is a hydrothermal vein type deposit consisting of several fissure filling quartz veins developed within the Changri Formation of the Ogcheon Supergroup in Geumsan, Chungnam. This study is to provide an efficient exploration and development strategies based on the characteristics of the geology, geological structure, core logging, and ore vein occurrence and grade for the four pits (New pit, Main pit, Yanghapan pit and Teugho pit). Quartz veins are mostly developed with the strike of $N10^{\circ}-25^{\circ}W$ and $N5^{\circ}-20^{\circ}E$, and the thickness is in the range of 0.1~0.5 m, sometimes extending to over 1m. Although the quartz veins commonly form massive shape, they sometimes show zonal structure, comb structure as well as brecciated texture. Major ore minerals are pyrite and chalcopyrite, and pyrrhotite, sphalerite, galena, marcasite, electrum and chalcocite are also accompanied as minor phases. Gray and milky white quartz veins, which are occasionally crosscut by calcite vein, also include fluorite. Ore evaluations for the 22 samples revealed that the samples from the pits generally have very low Au contents, lower than 1 g/t, but some clay samples of drilled core show very high Au concentrations, up to 141 g/t, indicating that Au content is much higher within fault gouges rather than within fresh quartz veins. This may represent that gold might have been reworked and reprecipitated by hydrothermal fluids in association with reactivation of the faults, and thus suggest that ore occurrence in this deposit is very complex and irregular and therefore more precise and systematic exploration is required.

• The Korean Journal of Petroleum Geology
• /
• v.5 no.1_2 s.6
• /
• pp.1-8
• /
• 1997

Seismic stratigraphic analysis of the high resolution profiles obtained from the southeastern shelf of Korea divided the deposits into 4 sequences; 1) sequence D, 2) sequence C, 3) sequence B and 4) sequence A (Holocene sediments). Sequence D was deposited in shallow-water environment at west of the Yangsan Fault as the basin subsided. On the other hand, the eastern part was formed at the slope front. Landward part of the slope-front fill sediments were eroded and redeposited nearby slope due to the syndepositional tilting of the basin. This tilting probably resulted from the continuous closing of the Ulleung Basin. Sequence C is made of stacked successions of the lowstand fluvial sediments, transgressive sediments and marine highstand sediments derived from the paleo-river in the western part of the Yangsan Fault. Sequence C in the eastern part of the Yanshan Fault was formed at the shelf break. Progradation of the lowstand sediments resulted in broadening of the shelf. Sequence C in the eastern part was also tilted but the tilting was weaker than in Sequence D. During the formation of sequence B the tilting stopped and the point source instead of the line source started in both sides of the Yangsan Fault. Sequence B was composed of the highstand systems tract partially preserved around the Yokji island, lowstand systems tract mainly preserved in the Korea Trough and transgressive systems tract. After the stop of the tilting, the force of compression due to the closing of the Ulleung Basin may be released by the strike-slip faults instead of tilting.