• 한국통신학회논문지
• /
• 제24권10A호
• /
• pp.1546-1554
• /
• 1999

본 논문에서는 결함 및 마스크, 스위칭 기능을 포함한 결함에 대한 동적 구조를 갖는 결함 허용 시스템에 대하여 신뢰도 평가를 할 수 있는 동적 결함 트리 알고리듬(Dynamic Fault Tree Algorithm)을 제안한다. 본 알고리듬에서는 동적 특성을 표현할 수 있는 FDEP, CSP, SEQ, PAG 게이트 정의로부터 출발한다. 이러한 게이트의 정의는 시스템의 동적 특성을 만족시키기 위해 시스템의 상태증가를 유발하는 기존의 마코브 모델과 시스템의 정적 특성에 대해서만 평가 가능했던 결함 트리 모델에 대한 제약조건을 해결할 수 있었다. 본 논문에서는 제시한 알고리듬의 장점을 입증하기 위하여 동적 특성을 가지는 TMR(Triple Modular Redundancy) 시스템과 이중화 중복 시스템(Dual Duplex System)에 대해 기존의 알고리듬과 제시하는 알고리듬을 적용하여 신뢰성 평가를 수행한 후 이를 통해 제시하는 알고리듬이 동적 여분을 사용하는 시스템이나 순차 종속 고장들을 가지는 시스템, 결함과 오류의 복구 기술을 가지는 시스템들에 대해 우수함을 보여준다.

• Earthquakes and Structures
• /
• 제12권6호
• /
• pp.653-663
• /
• 2017

A seismic margin assessment evaluates how much margin exists for the system under beyond design basis earthquake events. Specifically, the seismic margin for the entire system is evaluated by utilizing a systems analysis based on the sub-system and component seismic fragility data. Each seismic fragility curve is obtained by using empirical, experimental, and/or numerical simulation data. The systems analysis is generally performed by employing a fault tree analysis. However, the current practice has clear limitations in that it cannot deal with the uncertainties of basic components and accommodate the newly observed data. Therefore, in this paper, we present a Bayesian-based seismic margin assessment that is conducted using seismic fragility data and fault tree analysis including Bayesian inference. This proposed approach is first applied to the pooltype nuclear research reactor system for the quantitative evaluation of the seismic margin. The results show that the applied approach can allow updating by considering the newly available data/information at any level of the fault tree, and can identify critical scenarios modified due to new information. Also, given the seismic hazard information, this approach is further extended to the real-time risk evaluation. Thus, the proposed approach can finally be expected to solve the fundamental restrictions of the current method.

• International Journal of Control, Automation, and Systems
• /
• 제4권1호
• /
• pp.105-112
• /
• 2006

The main function of a reactor protection system is to maintain the reactor core integrity and the reactor coolant system pressure boundary. Generally, the reactor protection system adopts the 2-out-of-m redundant architecture to assure a reliable operation. This paper describes the safety assessment of a digital reactor protection system using the fault tree analysis technique. The fault tree technique can be expressed in terms of combinations of the basic event failures such as the random hardware failures, common cause failures, operator errors, and the fault tolerance mechanisms implemented in the reactor protection system. In this paper, a prediction method of the hardware failure rate is suggested for a digital reactor protection system, and applied to the reactor protection system being developed in Korea to identify design weak points from a safety point of view.

• 한국화재소방학회논문지
• /
• 제31권6호
• /
• pp.67-73
• /
• 2017

항공기 정비 격납고는 고가의 항공기를 보관하거나 정비, 점검등을 하는 건축물로 화재발생 빈도는 낮지만 화재발생 시 인적, 물적 피해가 매우 클 수 있다. 따라서 본 연구에서는 Fault tree를 이용하여 현재 운용중인 항공기 정비 격납고 소화시스템의 화재 안전성에 대한 정성적 분석을 시행하고, 도출된 기본사상에 대한 고장률 자료를 활용하여 정량적 분석을 실시한 후 정상사상의 발생 확률에 대한 Minimal cut set의 중요도를 분석하였다. Minimal cut set에 의한 정성적 분석결과 항공기 격납고 포헤드 소화시스템의 화재제어 실패로 대형화재로 확대될 수 있는 사고경로는 14개라는 것을 알 수 있었다. 또한 정량적인 분석 결과 대형화재로 확대될 확률은 $2.08{\times}E-05/day$이며, Minimal cut set의 중요도 분석 결과 화재 발생 시 4개의 Minimal cut set 즉, 구역별 화재 감지기 및 포헤드 동작과 항공기 날개 및 Fire plume에 의한 소화약제 차단이 동일하게 24.95%로 대형화재로 확대될 가능성의 대부분을 차지하였으며, 항공기 정비 격납고의 포헤드 소화시스템은 항공기 날개 하부화재에 대한 적응성이 없어 개선이 필요한 것으로 Fault tree를 이용하여 처음 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.305-309
• /
• 1993

The application of fault tree technique to the analysis of compressor failure is considered. The techniques involve the decomposition of the system into a logic diagram or fault tree in whichcertain basic or primary events lead to a specified top event which signifiss the total failure of the system. The fault trees are used to obtain miniumal cut sets from whichthe modes of system failure and, hence the reliability for the top event can be calculated. The method of constructing fault trees and the subsequent estimation of reliability of the system is illustrated through a compressor failure. FTA is roved to be efficient to investigate the compressor fault train.

• 한국철도학회논문집
• /
• 제11권6호
• /
• pp.530-535
• /
• 2008

대구지하철 화재사고 이후 많은 화재안전대책에 대한 연구가 수행중이나, 안전대책의 효과에 대한 정량적 분석이나 다양한 대책이 조합되어 사용될 경우의 효과에 대한 연구는 미흡한 실정으로 화재안전대책의 중복투자가 발생할 수 있다. 본 연구에서는 다양한 화재안전대책의 연관성을 분석하고 안전대책이 위험도 경감에 미치는 영향을 정량적으로 평가하기 위해 주요 영향인자와 대책을 고장수목과 사건수목으로 구성하였다. 본 연구 결과는 향후 위험도 평가과정에서 안전대책의 민감도 분석이나 비용효과 분석 등에 활용될 수 있다.

• 상하수도학회지
• /
• 제28권6호
• /
• pp.699-711
• /
• 2014

This study was carried out to analyze water suspension in the water supply system through fault tree analysis. And quantitative factors was evaluated to minimize water suspension. Consequently the aim of this study is to build optimal planning by analyzing scenarios for water suspension. Accordingly the fault tree model makes it possible to estimate risks for water suspension, current risks is $92.23m^3/day$. The result of scenario analysis by pipe replacement, risks for water suspension was reduced $7.02m^3/day$ when replacing WD4 pipe. As a result of scenario analysis by water district connections, the amount of risk reduction is maximized when it is connecting to network pipe of D Zone. Therefore, connecting to network pipe for D Zone would be optimal to reduce risk for water suspension.

• 대한인간공학회지
• /
• 제20권3호
• /
• pp.61-76
• /
• 2001

This study is for analyzing the explosion accidents in the tunnels, roads, subways, streets and various kinds of building construction area with the use of Fault Tree Analysis(FTA). based on the police Department and Guns & Explosives Safety Technology Association's researching materials. the explosion accidents have been investigated and analyzed between 1988 and 1977. As the result, we can find out that the majority of the explosion accidents in Korea is the accidents by flown stones(45.7%), like in Japan. So we make the research chart which is needed for analyzing the explosion accident, and then analyze these accidents systematically. using the investigation codes of the industrial accidents. After that, the FTA was performed on the accidents by flown stones. They result fromm non-observance of the safety rules, and lees knowledge of the safety and so on. Moreover several causes are combined and then the accidents are apt to happen. So according to the results of this study, for the protection of the explosion accidents, the specialized safety education is badly needed and the enough investigation of the places before the work along with the management for safety in working must be planned.

• 한국멀티미디어학회논문지
• /
• 제20권11호
• /
• pp.1793-1802
• /
• 2017

In the recent years, IT and Network Technology has rapidly advanced environment in accordance with the needs of the times, the usage of the smart learning service is increasing. Smart learning is extended from e-learning which is limited concept of space and place. This system can be easily exposed to the various security threats due to characteristic of wireless service system. Therefore, this paper proposes the improvement methods of smart learning system security by use of faults analysis methods such as the FTA(Fault Tree Analysis) and FMECA(Failure Mode Effects and Criticality Analysis) utilizing the consolidated analysis method which maximized advantage and minimized disadvantage of each technique.

• 한국안전학회지
• /
• 제18권2호
• /
• pp.64-72
• /
• 2003

A new reliability assessment methodology is presented and the new method is compared with fault tree analysis. The system is modeled by directed graph at a new methodology, which is composed of nodes and arcs. The directed graph corresponds to the layout of chemical process and is easy to construct. Therefore, the directed graph analysis is applicable to the chemical process that has complex sequence. The example of fault tree analysis and directed graph analysis is given. The directed graph analysis has proved to be a valuable and useful method for the reliability assessment of chemical process.