• 제목/요약/키워드: Fault zones

검색결과 189건 처리시간 0.031초

단층대에서의 열-수리적 거동 모델링 (Thermo-hydraulic Modeling in Fault Zones)

  • 이영민;김종찬;구민호;김영석
    • 자원환경지질
    • /
    • 제42권6호
    • /
    • pp.609-618
    • /
    • 2009
  • 지층 내에 발달한 고투수성 단층은 유체, 에너지, 그리고 용질이 이동하는데 있어서 중요한 역할을 하는 지질구조이다. 따라서 고투수성 단층 주변부에서는 지열수(혹은 온천), 지열 이상대, 그리고 금속 광상 등이 형성될 가능성이 크다. 단층의 구조에 따른 지하수 유동과 이에 따른 지층 내의 열적 상태를 확인하기 위해서 단층 구조가 다른 세 가지의 경우에 대해서 이차원 열-수리적 거동 모델링을 수행하였다. 모델링 결과로부터 세 가지 모든 단층 구조의 경우에서 단층의 투수율이 커지면 단층대에서의 지하수 용출 온도가 초기 온도 보다 높아지는 경향을 확인 할 수 있다. Peclet number 와 단층대에서의 용출온도의 상관관계 분석으로부터 상관계수($R^2$)가 0.98로 상당히 높은 것을 확인하였다. Peclet number가 1이상 일 때 단층대에서는 약 $32^{\circ}C$ 이상의 온도가 용출되며 이러한 경우에 단층대에서의 열흐름은 매질을 통한 전도 보다는 지하수에 의한 대류의 영향이 큰 것으로 판단된다.

비활성 그리고 활성 단층지역 내부와 주변에서의 응력장에 대한 수치적 분석 (Numerical Analysis of Stress Regimes in and around Inactive and Active Fault Zones)

  • 정우창;송재우
    • 한국방재학회 논문집
    • /
    • 제1권1호
    • /
    • pp.117-125
    • /
    • 2001
  • 비활성 그리고 황성 단층지역의 내부와 주변에서 발생하는 응력장의 변화에 대한 수치적 분석이 수행되었다. 존재하는 비활성 단층지역 근처에서의 응력장은 단층의 방향과 단층화된 암반과 주위의 비단층화된 암반의 탄성적 특성 사이의 대조에 따라 변화한다. 활성 단층지역 주위의 응력장에 대한 분석에서, 만약 단층지역의 항복응력이 초과된다면, 단층지역 내에서의 국부화된 전단응력은 주위의 비단층화된 암반에서의 평균응력 보다 작게 되는 단층 내에서의 평균응력의 감소를 유발시킨다. 따라서 이러한 응력경사는 단층지역내로 유체의 흐름을 기대할 수 있다.

  • PDF

터널 굴진면 수평변위를 이용한 굴진면 전방의 단층대 예측 (Prediction of Fault Zone ahead of Tunnel Face Using Longitudinal Displacement Measured on Tunnel Face)

  • 송규진;윤현석;서용석
    • 지질공학
    • /
    • 제26권2호
    • /
    • pp.187-196
    • /
    • 2016
  • 터널 굴진면에서 측정된 수평 변위를 이용하여 터널 굴진면 전방에서의 단층대 예측을 검토하기 위하여 총 28개 단층모델을 대상으로 3차원 유한요소해석을 실시하였다. 그리고 터널 굴착에 의해 발생하는 수평변위를 x-MR (moving range) 관리도 기법을 이용하여 정량적으로 분석하여 굴진면 전방에 분포하는 단층의 존재를 예측하였다. 단층대는 단층점토 및 단층각력, 단층 손상대로 구분하여 모델링하였으며, 단층핵의 폭은 1 m (단층점토 0.5 m, 단층각력 0.5 m), 단층 손상대의 폭은 2 m로 설정하였다. 분석 결과, 굴진면으로부터 약 2~26 m 전방에서 단층의 예측이 가능하였고, 5개의 측정지점에서 대부분 경사 45°인 경우 예측이 가장 빠른 것으로 나타났다. 또한 굴진방향과 단층면 사이의 각도가 작을수록 예측 가능시점이 빠른 것으로 분석되었다.

단층활동시 매설 파이프라인의 거동에 대한 직접진단 시험모델 수치해석 (Numerical Analysis using Direct Shear Test Model for the Behavior of Buried Pipeline by the Fault Motion)

  • 장신남
    • 한국농공학회지
    • /
    • 제41권6호
    • /
    • pp.64-74
    • /
    • 1999
  • The frequency of earthquake occurrence tends to increase in Korea. Therefore, the stability of pipeline, such as watersupply pipe, gas pipe, and oil pipe etc. across fault zones in Gyoung-sang landmass is very important, expecially , in metropolitan area. There were some examples of the construction of buried pipeline across fault zones in Korea. the interactiion between the buried pipeline across fault zones and the ground is considered. As well, in the interfaces of them, the direct shear numerical analysis model including elasto-plastic joint element is assumed that the retained dilatancy theory in them, otherwise. Also, the other elements are modeled the ground is nonlinear elastic coutinuaus beam, respectively. In this study, the maximum shear force point exist inside retaine zone(anchored zone) during shwar (as fault sliding), and the distribution of pipeline's behavior is all alike them of pipeline buried in ladnsliding grounds. Since the pipeline is not continuous beam but jointed by steel-pipe segments , practically, on acting of a large bending moment or a shear force, then, those are may be unstable. The reaearch on this point may be new approach.

  • PDF

AN OBSERVATION ON THE FRACTURE SYSTEMS OF THE SOUTHERN VIETNAM

  • Chang Sung Jin;Long Nguyen Tien
    • 한국석유지질학회:학술대회논문집
    • /
    • 한국석유지질학회 2001년도 제8차 학술발표회 발표논문집
    • /
    • pp.6-22
    • /
    • 2001
  • A study of the fracture systems in outcrops of southern onshore Vietnam revealed two kinds of fracture groups according to their origin: cooling fractures and deformation related fractures. Cooling of magma introduced extensive fractures in the batholiths with wide spacing and narrow aperture. They are found widespread in all magmatic bodies, but result in poor reservoir quality due to low bulk porosity and narrow aperture. Cooling fractures are often reactivated during later stress regimes. Deformation related fractures, especially 'fault damage zones' and 'hanging wall deformation' is thought to form the most important reservoir type in the fractured basement rock. The porosity formed by intense fracturing and fault breccia along minor fault zones is thought to be the producing zones in the producing fields of Cuu Long basin. They are found along major faults and widespread in hanging wall blocks.

  • PDF

Sediment-hosted gold mineralization of the Kyaukpahto mine, Kawlin Township, Myanmar

  • Swe, Ye-Myint;Min, A-Ung;Lee, In-Sung
    • 대한자원환경지질학회:학술대회논문집
    • /
    • 대한자원환경지질학회 2003년도 춘계 학술발표회 논문집
    • /
    • pp.315-315
    • /
    • 2003
  • Gold mineralization at Kyaukpahto occurs as stockworks/disseminations and locally as breccia zones in silicified sandstones of Lower to Middle Eocene Male Formation of Myanmar. The mineralization is spatially related with NNE -trending fracture zones_probably tensional open fractures caused by the right-lateral Sagaing fault system. Intensive silicification, sericitization, argillic alteration, sulfidation, and decalcification are recognized in the Kyaukpahto mine area. (omitted)

  • PDF

전기, 전자탐사에 의한 경주남부 (입실지역)의 울산 단층 심부구조 (Deep structure of Ulsan fault by electric and EM surveys in ipsil area, South of Kyeongju)

  • 손호응
    • 자원환경지질
    • /
    • 제32권2호
    • /
    • pp.161-167
    • /
    • 1999
  • Electric and electromagnetic surveys were conducted to investigate the deep structure of the Ulsan fault in Ipsil area, south of Kyeongju. On this study, especially high-frequency magnetotelluric method of electromagnetic survey in the frequency range of 10~100,000 Hz was mainly employed to study the deep subsurface configuration. High-frequency MT survey was performed at 70 points of spacing 30~50 m, making 3.8 km survey line. As a survey result, a 2-km-depth 2-D cross-section was achieved. It shows vertical and horizontal subsurface variations of resistivity values. Near-surface layer having low resistivity value becomes thicker eastward up to 800m. There is a steep low resistivity zone in the west side of survey line, and there exists two low resistivity zones dipping west in the east side of survey line. Two low resistivity zones are interpreted to be related to major movement pattern of the Ulsan fault. This suggests that major fault lines are developed on both peripheral sides of the broad fault zone.

  • PDF

이더넷 통신기반의 자율적 고장 판단 및 복구 방법론 연구 (The Self-Fault Determination and Restoration Methodology based on the Ethernet Communication)

  • 고윤석;이서한;최현철;신재현
    • 전기학회논문지
    • /
    • 제58권9호
    • /
    • pp.1674-1680
    • /
    • 2009
  • This paper proposes an autonomous fault determination, fault zone isolation and fault restoration strategy based on the ethernet communication as a new attempt to solve the problem the of the existing central control method. In proposed method, The FRTU(Feeder Remote Terminal Unit)s on the feeder determines autonomously where the faulted zone is by exchanging the voltage and current information with neighbor FRTUs based on the network communication, and then separates the faulted zone in an nil-voltage status to make the protective device to reclose successively. In particular, the minimization of outage time and relational load balancing is archived by each interconnection switch which determines autonomously the load zone to be allocated among those zones after the sound outage zones was separated individually. Finally, to show effectiveness of the proposed fault restoration strategy, the several fault cases are simulated for the test distribution system, and the load balancing index of the proposed solution is compared with all of feasible solutions.

파쇄대에 접근하는 터널의 내공변위 변화 해석 (Convergence change in a tunnel face approaching fault zones)

  • 이인모;이승주;이주공;이대혁
    • 한국터널지하공간학회 논문집
    • /
    • 제4권3호
    • /
    • pp.235-245
    • /
    • 2002
  • 본 연구는 터널 굴착시 막장 전방의 지반변화를 사전에 예측할 수 있는 방법을 제시하고자 하였다. 이를 위하여 막장 전방에 파쇄대가 방향성을 가지고 존재 할 때 터널의 3차원 해석을 통하여 터널의 내공변위의 변화 경향을 살펴보았으며, 이를 통하여 막장전방의 지반 변화를 파악하고자 하였다. 이러한 터널의 내공변위의 변화는 경향선과 영향선을 이용하여 표현할 수 있으며 이를 이용하여 막장 전방에 존재하는 파쇄대를 예측하고자 하였다. 수치해석 결과에 의하면 막장전방에 파쇄대가 존재 할 경우 막장이 파쇄대에 접근할 수록 급격한 경향선의 변화가 나타난다. 또한 파쇄대가 방향성을 가지고 있는 경우에는 경향선의 급격한 변화 외에 측벽부의 변위 경향이 비대칭을 이루므로 인하여 평사투영도 상에 나타난 변위가 비대칭을 형성하는 것으로 파악되었다. 이러한 수치해석결과에 의한 내공변위 해석결과를 현장 계측 자료와 비교하였으며, 현장에서 계측한 오차를 줄일 수 있도록 계측데이터가 정규분포 한다고 가정하여 현장데이터를 분석한 결과 막장전방의 파쇄대의 존재 유무를 파악할 수 있는 것으로 나타났다.

  • PDF