• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1311-1322
• /
• 1997

Performance management of ATM network is urgently required because a different quality of service should be guaranteed on each connection. A lot of performance measurement data increase the burden on agent systems and on managment stations. In this paper, an effective OAM-based performance monitoring and faulty node identification technique is proposed. A proposed VP Selection Algorithm reduces management-related traffic and when the indication of hard or soft failure state is detected, failed node is identified by Fault Identification Rule.

• 조명전기설비학회논문지
• /
• 제29권3호
• /
• pp.102-106
• /
• 2015

In order to avoid the electrical fire, AFCI(Arc Fault Cirruit Interrupter) has been obligated to be adopted in the United States of America since 2002. A study was carried out on how to detect Arc. In this paper, The propose is high-frequency signal detection methods and RSSI(Received Signal Strength Indication) signal processing algorithm for Arc detection. and the electrical characteristics were verifying.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권1호
• /
• pp.1-5
• /
• 2011

To enter next process control, numerous approaches, including run-to-run (R2R) process control and fault detection and classification (FDC) have been suggested in semiconductor manufacturing industry as a facilitation of advanced process control. This paper introduces a novel type of optical plasma process monitoring system, called plasma eyes chromatic system (PECSTM) and presents its potential for the purpose of fault detection. Qualitatively comparison of optically acquired signal levels vs. process parameter modifications are successfully demonstrated, and we expect that PECSTM signal can be a useful indication of onset of process change in real-time for advanced process control (APC).

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.615-621
• /
• 2014

Power transformer is one of the most important equipments in electrical power system. The detection of certain gases generated in transformer is the first indication of a malfunction that may lead to failure if not detected. Dissolved gas analysis (DGA) of transformer oil has been one of the most reliable techniques to detect the incipient faults. Many conventional DGA methods have been developed to interpret DGA results obtained from gas chromatography. Although these methods are widely used in the world, they sometimes fail to diagnose, especially when DGA results falls outside conventional method codes or when more than one fault exist in transformer. To overcome these limitations, fuzzy inference system (FIS) is proposed. 250 different cases are used to test the accuracy of various DGA methods in interpreting the transformer condition.

• 한국소음진동공학회논문집
• /
• 제12권10호
• /
• pp.799-807
• /
• 2002

The vibration signal can give an indication of the condition of rotating machinery, highlighting potential faults such as unbalance, misalignment and bearing defects. The features in the vibration signal provide an important source of information for the faults diagnosis of rotating machinery. When additional training data become available after the initial training is completed, the conventional neural networks (NNs) must be retrained by applying total data including additional training data. This paper proposes the fault diagnostics algorithm using the ART-Kohonen network which does not destroy the initial training and can adapt additional training data that is suitable for the classification of machine condition. The results of the experiments confirm that the proposed algorithm performs better than other NNs as the self-organizing feature maps (SOFM) , learning vector quantization (LYQ) and radial basis function (RBF) NNs with respect to classification quality. The classification success rate for the ART-Kohonen network was 94 o/o and for the SOFM, LYQ and RBF network were 93 %, 93 % and 89 % respectively.

• 한국통신학회논문지
• /
• 제30권8B호
• /
• pp.514-524
• /
• 2005

광 버스트 스위칭 망은 Ingress 에지 라우터에서 입력된 If 패킷을 모아서 데이터 버스트를 생성하고 과도한 프로세싱 오버헤드 없이 효율적인 버스트 교환을 수행하기 위하여 채널에 대한 예약을 목적으로 데이터 버스트보다 offset 시간 이전에 제어 패킷을 전송하여 파장 채널을 예약한다. 따라서 OBS 방식은 광 계층에서 버퍼에 의존하지 않고 단방향 예약 방식으로 빠르게 투명성을 지닌 광전송 경로를 설정할 수 있다. 그러나 링크 장애와 같은 망 장애가 발생할 경우 광 버스트 스위칭 망의 단 방향 예약 특성 때문에 데이터 버스트의 많은 손실이 발생하게 되어 트래픽 QoS에 심각한 영향을 초래하게 된다. 따라서 본 논문에서는 광 버스트 스위칭 망에서 장애 발생시에도 손실되는 버스트를 최소화하여 QoS를 보장할 수 있도록 Ingress 에지 라우터에서는 부 반송파 다중화 방식 기반의 버스트 생성 및 전송모듈 구조를 설계하고 코어 망에서는 신속한 장애 복구가 가능한 혼합형 장애 복구 기법을 제안하였다. 또한 제안된 기법의 성능 평가를 위하여 망 장애 발생에 따른 버스트 손실률, 버스트 처리율 및 망 자원 사용량 관점에서 기존의 기법과 비교 평가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.34-36
• /
• 2006

The number of confine-disease of elevator increases every year and then sudden rise, sudden stop, error of level indication, stand; those can bring to uneasiness of elevator passenger and malfunction accidents related life accident are increasing. For confirmation those malfunction accident, we are measuring and analyzing power quality(Sag, Interruption, Harmonic) of the actual site and evaluated the performance for stop and stating by testing the two imitation test equipment with EN12016(2004) standard level. This paper will be used data of the analysis for mutual relation between Power Quality and malfunction and fault of elevator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.97-102
• /
• 2005

As the railroad-base is an important factor to maintenance the rolling stocks, it is essential to improve the current problems of the environment pollution, nose, vibration, welfare, work condition and to applicate the performance betterment cases to the new base construction and pre-base maintenance. When the new base construction and pre-base maintenance is proceeded, it is necessary to construct the optimized system which includes the user's opinions enough to prevent the waste of the budget ,in that some part of the budget is spent to improve convenience, work condition, and the fault of base system after the construction. Therefore, this research intends to present the problem of the pre-constructed facilities, the testing operators' opinions, the analysis and the investigation of facilities' improvement, thorough the indication of provisions and the analysis of the result of the survey of testing operators.

• 한국안전학회지
• /
• 제26권2호
• /
• pp.20-25
• /
• 2011

The fire event occurred in fire proof zone often causes serious electrical problems such as shorts, ground faults, or open circuits in nuclear power plants. These would be directed to the loss of safe shutdown capabilities performed by safety related systems and equipments. The fire event can treat the basic design principle that safety systems should keep their functions with redundancy and independency. In case of a multi-core cable fire, operators can not perform their mission properly and can misjudge the situation because of spurious operation, wrong indication or instrument. These would deteriorate the plant capabilities of safety shutdown and make disastrous conditions. In this paper, the characteristic of cable fire is investigated and the heat-flux evaluation for cable fire is studied. Moreover, a diagnostic methodology for degraded cable in nuclear power plants is presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.134-136
• /
• 2002

In April of 2000, the Korea Power Exchange(KPX) was introduced into Korea electricity market. The purpose of this paper is to describe how the system operator indicates operational risks between the transmission planning and the supply and demand growth to make the market "work" and manage the power system in real time. This paper describes the experiences of kpx about the indication of operational risks including, for example, contingency analysis, voltage profile and fault capacity of three-phase short current.