• 제목/요약/키워드: Fault Weight

검색결과 94건 처리시간 0.03초

Hall 센서를 이용한 엘리베이터 와이어 로프의 비파괴 검출시스템의 개발 (Development of Nondestructive Detecting System for Elevator Wire Ropes using Hall-effect Sensors)

  • 김성덕
    • 센서학회지
    • /
    • 제10권1호
    • /
    • pp.33-41
    • /
    • 2001
  • 와이어 로프는 무거운 중량을 안전하게 운반하거나 기계적인 에너지를 빠르게 전송하는 곳과 같은 산업응용 분야에 광범위하게 사용되어 왔다. 특히, 운전 중 엘리베이터의 와이어 로프가 파손되면 큰 재산 상 손실과 주변 인명의 심각한 상해를 초래할 수 있다. 따라서, 와이어 로프의 정기적인 검사는 매우 중요하다. 와이어 로프의 고장 검출은 로프의 구조, 특성, 결함 특성, 검출방법과 신호처리 방법에 대한 기본적인 이해가 요구된다. 이 연구에서는 엘리베이터에 노화된 와이어 로프에 대한 마모, 단선, 부식과 형붕괴와 같은 결함을 검출하기 위하여, Hall 센서를 결합한 새로운 결함 검출시스템의 개발에 대하여 다룬다. 휴대용 계측기로서 검출기를 사용하기 위하여, Hall 센서를 가진 센싱 부분과 아날로그 신호처리 및 프로그램의 제작에 대한 몇 가지 특성들이 서술되었다. 제작된 검출시스템에 대한 실험과 실장시험 결과 역시 제시되었다. 그 결과, 검출시스템은 사용 중인 노화된 와이어 로프의 결함을 검출하는데 양호한 효율성을 갖는다는 것을 확인하였다.

  • PDF

Mn 첨가가 경면처리용 Fe계 신합금의 캐비테이션 에로젼과 슬라이딩 마모저항성에 미치는 영향 (Effect of Mn-Addition on the Sliding Wear Resistance and the Cavitation Erosion Resistance of Fe-base Hardfacing Alloy)

  • 김윤갑;오영민;김선진
    • 한국재료학회지
    • /
    • 제12권7호
    • /
    • pp.550-554
    • /
    • 2002
  • The effect of Mn on cavitation erosion resistance and the sliding wear resistance of Fe-base hardfacing NewAlloy was investigated. Mn is known to decrease stacking fault energy and enhance the formation of $\varepsilon$-martensite. Cavitation erosion resistance for 50 hours and sliding wear resistance for 100 cycles were evaluated by weight loss. Fe-base hardfacing NewAlloy showed more excellent cavitation erosion resistance than Mn-added NewAlloys. $\Upsilon-\alpha$' phase transformation that can enhance erosion resistance by matrix hardening occurred in every specimens. But, only in Mn free Fe-base hardfacing NewAlloy, the hardened matrix could repress the propagation of cracks that was initialed at the matrix-carbides interfaces more effectively than Mn-added NewAlloy The Mn free Fe-base hardfacing NewAlloy showed better sliding wear resistance than Mn-added alloys. Mn-addition up to 5wt.% couldn't increase the sliding wear and cavitation erosion resistance of Fe-base hardfacing alloy because it didn't make $\Upsilon\to\varepsilon$ martensite phase transformation. Therefore, it is considered that the cavitation erosion and the sliding wear resistance can be improved due to $\Upsilon\to\varepsilon$ martensite phase transformation when Mn is added more than 5wt.% in Fe-base hardfacing alloys.

불균형 데이터를 갖는 냉동 컨테이너 고장 판별 및 원인 분석을 위한 기계학습 모형 개발 (Development of machine learning model for reefer container failure determination and cause analysis with unbalanced data)

  • 이희원;박성호;이승현;이승재;이강배
    • 한국융합학회논문지
    • /
    • 제13권1호
    • /
    • pp.23-30
    • /
    • 2022
  • 냉동 컨테이너의 고장은 큰 비용의 손실을 야기하지만, 현재 냉동 컨테이너의 알람 체계는 효율성이 떨어진다. 기존에 냉동 시스템의 시뮬레이션 데이터를 활용한 연구는 존재하지만, 냉동 컨테이너의 실제 운영 데이터를 활용한 연구는 부족하다. 이에 본 연구는 실제 냉동 컨테이너 운영 데이터를 활용하여 고장 원인을 분류하였다. 실제 데이터에서는 데이터 불균형이 발생하였으며 ENN-SMOTE, 클래스 가중치를 둔 Logistic 회귀분석과 본 연구에서 개발한 2-stage 알고리즘을 비교하여 데이터 불균형문제를 해결하였다. 2-stage 알고리즘은 XGboost, LGBoost, DNN을 사용하여 첫 번째 단계에서는 고장 및 정상을 분류하고, 두 번째 단계에서는 고장의 원인을 분류하는 알고리즘이다. 2-stage 알고리즘에서 LGBoost를 사용한 모델이 99.16%의 정확도로 가장 우수하였다. 본 연구는 데이터 불균형을 해결하기 위해 2-stage 알고리즘을 활용한 최종모델을 제안하며 이는 다른 산업에도 활용할 수 있을 것으로 사료된다.

"소문(素問).맥요정미론(脈要精微論)"의 규구충권(規矩衡權)에 대한 연구 (Study on Compass, Carpenter's square, The Beam of Balance and the Weight of balance[規矩權衡] in "Somun(素問).Maekyojeongmiron(脈要精微論)")

  • 이혜연;강정수
    • 대한한의학원전학회지
    • /
    • 제23권1호
    • /
    • pp.101-114
    • /
    • 2010
  • In the perspective of the correspondence of heaven and man[天人相應], people live through Gi of heaven and earth[天地之氣], and the human body which is a small universe[小宇宙] itself receives influence while sympathizing with the Gi and heaven[天氣]. So with unexpected incident of the Eum and Yang, four season[陰陽四時], ups and downs of warmth of cold and chilliness of warm[寒熱溫涼] differs, and the position of Gi of human[人氣] changes, regimen and application of acupuncture, and images[象] of the pulse changes. In "Maekyojeongmiron(脈要精微論)", ups and downs of Eum and Yang changes by four season[四時], and correspondence of ups and downs of pulse law is explained with compass, carpenter's square, the beam of balance and the weight of balance[規矩權衡]. Compass[規] is a measure of instrument that can draw a circle, like regulating the measure and differing the center of the circle and diameter and drawing a circle, compass is a image of Gi of Yang[陽氣] that was staying deep inside the body in winter stretching out by big fault[太過不及] of year and energy[元氣] of human in spring. Carpenter's square[矩] is a instrument that draws direction, which is a image of Gi of Yang flourishing in summer and when it gets highly flourished, again the Gi of Eum[陰氣] comes alive and falls. The beam of balance[衡] is a scale, like a scale that tilts at once when one side is slightly heavy, the beam of balance is a image Gi of yang that is fully flourished in summer and about to descent again, which is just about to fall but not going down yet. The weight of balance [權] is a image of gi of yang which as descent to the bottom and staying in the deepest place. compass, carpenter's square, the beam of balance and the weight of balance is not a direct pulse image[脈象], but standard image of pulse of pulse corresponding to the Gi of human[人氣] that changes by four season, and the explanation includes the pulse image of four season like the taut, full, floating, deeply gather[弦鉤浮營] of "Okgijinjangron(玉機眞藏論)" or taut, full, skip, float, deep [弦鉤代毛石] of "Pyeong-ingisangron(平人氣象論)". So with compass, carpenter's square, the beam of balance and the weight of balance, can judge is human correspond in Eum and Yang, four seasons, this is importantly used in examination of pulse[診脈] with existence and nonexistence, and prognosis of illness.

999번 지방도로 경상북도 안동시 위리 지역의 사면 변형 및 안정성 분석 (Analysis of Deformation and Stability of Slope at the Wiri Region of Local Road 999 Nearby Andong, Gyeongsangbukdo in Korea.)

  • 장현식;장보안
    • 지질공학
    • /
    • 제10권1호
    • /
    • pp.1-12
    • /
    • 2000
  • 경상북도 안동시 임동면에 위치한 999번 지방도로 위리 지역에 고개 마루를 절취하여 도로 개설공사를 시행한 후, 강우량이 많을 때 산측이 침하하고 도로가 융기하는 등 사면이 불안정하게 활동하였다. 이 연구에서는 위리 지역의 변형 발생의 원인을 분석하고, 수치해석을 통하여 연구지역 사면의 안정성을 평가하였다. 연구지역은 백악기 셰일, 이암 및 사암으로 구성되어 있으며, 북북서 및 북북동 방향의 두 개의 단층이 분포하고 있다. 사면의 변형은 지하수위의 증가에 따른 단층 점토의 전단강도 감소, 간극수압의 증가, 단위중량의 증가 등으로 인하여 단층을 따라 사면이 이동하면서 발생하며, 위의 여러 요인 중에서 단층 점토의 전단강도 감소가 사면의 변형에 가장 큰 요인으로 밝혀졌다. 사면의 안정성 및 변형정도를 파악하기 위하여 사면에 8개의 단면을 설정한 후 한계평형법, 유한 요소법 및 유한 차분법을 이용하여 해석을 실시하였다. 해석 결과, 지하수위가 단층면 아래에 분포할 때 안전율은 1.7 이상이지만, 지하수위가 지표면까지 상승하면 안전율은 1.0 이하로 감소하고, 15~30cm의 변위가 발생하는 것으로 해석되어 위리 지역에 발생한 변형과 거의 유사한 결과를 보여준다. 안정화 공사가 끝난 현재에는 지하수위가 지표면에 도달하여도 각 단면의 안전율은 2.4 이상이고 2.8cm이하의 변위가 발생하여, 이 지역의 사면은 매우 안정한 것으로 판단된다.

  • PDF

탄소섬유강화플라스틱(CFRP)의 인장하중하에서의 파괴거동에 따른 음향방출신호 특성에 관한 연구 (A Study on the characteristics of the Signals of AE according to Fracture mode of CFRP under Tensile load)

  • 이경원;이상윤;남준영;이종오;이상율;이보영
    • 한국항공운항학회지
    • /
    • 제18권4호
    • /
    • pp.51-58
    • /
    • 2010
  • Recently, aerospace structures have lightweight trend in order to reduce the cost of fuel and system, Carbon Fiber Reinforced Plastic (CFRP) can give the ability to reduce weight at 20~50% as the substitution of metal alloy, and there are advantages such as high Non-rigid, specific strength and anti-corrosion, but it is difficult to prove its destruction properties due to heterogeneous structure and anisotropy. In this study we designed specimen, inducing distinguishing destructions of material (for example, matrix crack, fiber breakage, and delamination) by using the Carbon Fiber Reinforced Plastic (CFRP) which is used in a real aircraft, to apply acoustic emission technique to aerospace structures. And we gained data via tensile testing and acoustic emission technique, from which each fault signal was classified respectively by using AE parameters and waveform.

아크 회로의 특성 분석 및 AFCI 설치로 인한 사회적 비용평가에 관한 연구 (Research on Characteristics of Arcing Circuit and Evaluation of Societal Cost caused by AFCI Installation)

  • 박치현;배석명;임용배;김기현;최명일
    • 조명전기설비학회논문지
    • /
    • 제21권8호
    • /
    • pp.144-150
    • /
    • 2007
  • 전력사용이 증가함에 따라 전기설비에 의한 전기화재 발생이 증가하고 있다. 통계에 따르면 전기화재가 화재원인 중 가장 높은 비중을 차지하고 있음을 알 수 있다. 그럼에도 불구하고 전기화재를 사전에 예방할 수 있는 조사기법이 아직은 부족한 실정이다. 이 논문은 전기화재 원인과 아크차단기의 특성에 관하여 분석한다. 먼저 아크차단기와 기존의 배선용 차단기를 비교하고 전력의 수학적 분석을 통해 아크에 의한 위험성을 분석하고 회로의 단락에 의한 위험성과 비교한다. 또한 아크차단기 설치와 사회적 비용간의 관계에 대해 알아봄으로써 아크차단기의 필요성을 제기한다.

양자화 삼각 퍼지 함수를 이용한 FDNN 구현 및 성능 분석 (Implementation and Performance Analysis of FDNN Using Quantization Triangularity Fuzzy Function)

  • 변오성;이철희;문성용
    • 전자공학회논문지C
    • /
    • 제36C권11호
    • /
    • pp.84-91
    • /
    • 1999
  • 본 논문에서는 삼각함수와 양자화 된 삼각 퍼지함수를 가중퍼지평균(WFM: Weighted Fuzzy Mean)에 적용하여 비교하였다 또한 잡음의 특성에 따라서 영상에 포함된 잡음을 완전히 제거할 수 없는 단점을 개선하기 위하여, 계층적 구조의 결정기반 신경회로망(DBNN: Decision Based Neural Network)에 퍼지알고리즘을 적용하여서, 영상에 포함된 잡음을 제거하고 동시에 정보의 손실을 최소화하고 최적의 정보를 얻을 수 있는 고속 가중 퍼지결정 신경회로망(FDNN: fuzzy Decision Neural Network)을 구현하였다. 그리고 모의실험을 통하여 WFM과 FDNN의 성능을 비교하였으며, 보트(boats)의 영상에 대한 평균자승오차 (MSE:Mean Square Error)를 비교한 결과 제안된 FDNN이 우수함을 확인하였다.

  • PDF

진동모터용 PCB 정류자의 내구성 향상을 위한 신 합금도금 (Au-Cu) 개발 (Development of New Electroplating Alloy (Au-Cu) for Increasing the Durability of PCB Commutator in Vibration Motor)

  • 김영태;이성재;박성준
    • 한국정밀공학회지
    • /
    • 제26권6호
    • /
    • pp.114-121
    • /
    • 2009
  • Mobile phone is a representative personal communication tool among wireless communication devices. Recently, with the miniaturization and light-weight trend of mobile phone, the vibration motor has been replaced by coin type. The required performances of coin type vibration motor needed by user are long life, higher vibration, and thin thickness. Also the most important factor determines the performance of vibration motor is long-term reliability, which is mainly related to PCB plating technique for commutator. In this study, three types of fault were categorized to analyze the cause for malfunction of vibration motor. And, hardness and surface morphology on plating surface are also investigated to optimize the plating method and plating conditions. As a result, new plating method and conditions were proposed to increase the durability of PCB commutator.

펄스모드 스위칭 직류전원 장치에 적합한 AC/DC 컨버터 (AC/DC Converter Suitable for a Pulsed Mode Switching DC Power Supply)

  • 문상호;강성관;노의철;김인동;김흥근;전태원
    • 전력전자학회논문지
    • /
    • 제8권5호
    • /
    • pp.389-396
    • /
    • 2003
  • 직류진원 장치의 부하에 단락이 발생하는 경우 직류전원을 부하로부터 신속히 차단하고 재인가 가능한 새로운 방식의 ac/dc 컨버터를 제안하였다. 제안한 방식의 컨버터 출력전윈은 부하단락시 차단 및 정상상태로 회복시 직류전원을 재인가하여 정격출력전압으로 확립되는데 소요되는 시간이 각각 수백 $\mu\textrm{s}$ 이내에 이루어지는 특징이 있다. 또한 컨버터 출력필터 커패시터는 부하가 단락된 상태에서도 방전하지 않고 거의 정격출력전압을 유지할 수 있으므로 직류전원을 단락상태가 소멸된 정상부하에 재인가시 전압의 오버슈트 없이 신속한 부하전압 확립이 가능하다. 제안한 방식의 컨버터는 기존 방식에 비해 구조가 간단하고 소형경량화 가능한 장점이 있다. 제안한 회로방식에 대한 동작원리 설명 및 특성해석을 하였으며 실험을 통하여 그 유용성을 입증하였다.