• Journal of Food Hygiene and Safety
• /
• v.12 no.2
• /
• pp.132-140
• /
• 1997

Additives in plastics are capable of migrating from the packaging materials into the foodstuffs, thereby presenting a source of contamination and a potential health risk to the consumer. The migration from packaging materials into foodstuffs is first of all regulated by examining the amounts of global and specific migrated components. Besides, there is worldwide still a need for practical methods for measuring and monitoring migration from polymers, especially for the testing of migration into fatty foodstuffs. Therefore, these studies were undertaken to investigate the safety status of domestic plastic packaging materials with respect to migration. Another objective of this study was to examine the applicability of ethanol as an alternative fatty food simulant substituting for olive oil and n-heptane. The evaporation residues for various dometic plastic samples determined as described in Korean food laws were in the level from 4.3 to 14.5 mg/$\ell$, which were much lower than the limit value of 150 mg/$\ell$. The global migration values into 95 % ethanol showed to be comparable to those into n-heptane, while the olive oil migration values were comparably higher than those into ethanol or n-heptane and moreover they were not reproducible. The kinetic migration begavior of additives in polyolefin samples into 95% ethanol showed a Fickian diffusion process. The results of these studies on global migration and kinetic testings demonstrate that the ethanol could be successfully substitute for the olive oil and n-heptane as an alternative fatty food simulant, at least in contact with polyoefins.

• Journal of Food Hygiene and Safety
• /
• v.16 no.4
• /
• pp.333-341
• /
• 2001

The actual overall migration data obtained from plastic food packaging materials into food simulants under high temperature testing conditions as described in the regulations of European Union, USA, and Korea or Japan were compared. Overall migration values(OMVs) with non-fatty food simulants under high temperature conditions were observed to be generally below 2.5 mg/dm$^2$ except polyamides(CPA and PA 6,6) which were tested at 121$^{\circ}C$ for 2 hrs. As for the fatty food simulants, the OMVs with soybean oil were higher than other simulants. Among the films tested, PVC wrap showed higher OMVs ranging between 23.9 and 54.6 mg/dm$^2$than others. The OMVs were measured at higher level with the elevation of contact temperature and the extension of contact time, and in fatty food simulants rather than in non-fatty simulants. Under similar testing temperature and time conditions. the OMVs tended to be increased in polar films like PA with polar simulants, and contrarily in non-polar films like PO with non-polar simulants. It is noteworthy that a discrepancy with regard to the result of OMVs was observed for some films as a result of different migration testing methods and conditions of each country areas.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.12 no.1
• /
• pp.7-12
• /
• 2006

The EU regulation of overall migration which is the cornerstone of the limitation to ensure that plastic materials and articles intended to contact with foodstuffs are fit for the intended application, was reviewed. In Council Directives, it was established in detail what simulants, contact times and temperatures are to be used in migration tests performed under standardized conditions. In some cases, conventional conditions for substitution test was provided, because of technical reasons. Moreover, a reduction factor ranging from 2$\sim$5 may be applied depending on the foods, because olive oil which is simulant for fatty foods, is severe solvent compared with most fatty food.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.8 no.1
• /
• pp.1-10
• /
• 2002

The actual specific migration data for antioxidants and di-ethylhexyl adipate from plastic food packaging materials being used for fatty food and at high temperature into various food simulants were obtained and compared in accordance with the testing methods and conditions in EU, USA and Korea or Japan. In the case of food packaging material for high temperature use, especially in a thick film such as polypropylene in $450{\mu}m$ thickness, a significant difference in the migration value for antioxidants was observed depending on the migration testing condition and simulants used as defined in the each country areas. Considering the reduction factor of 2 to 5 as being currently applied in EU and USA regulations, the migration values obtained by testing methods of Korea or Japan can exhibit actually higher than those of EU and USA. The migration testing conditions are required to be specified diversely according to the actual exposure temperature of packaging materials.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.2
• /
• pp.42-58
• /
• 1999

Packaging materials and articles that are used in food contact applications can transfer constituents in the foodstuffs. This kind of risk of possible health hazards to consumers has been generally recognized for a long time with the consequence of establishing corresponding food regulations in most developed countries. However, the language of these laws, their interpretation, and their level of enforcement vary from country to country. Accordingly, the actual migrating levels from packaging materials can be varied depending on the migration testing methods as prescribed in the national legislation in each countries. Therefore, there are needs of elimination of non-tariff trade barriers raised by sanitary and phytosanitary or technical measures under the Final Act of the UR Agreement. In this connection, the EU and USA are currently in an ongoing process of legislation harmonization to overcome potential barriers to free trade. In general, regulations governing component transfer in the USA are more complicated and comprehensive than similar regulations in Europe. In future, standard migration testing procedures for microwave heat susceptor materials and for the use of fatty food simulant should be established and also harmonized among countries. The objective of this investigation is to compare the current regulations for migration testing for plastic containers and packaging materials in USA, EU and Korea or Japan. For those regulations, Korean standards are required to be kept up with the international standards. By doing this, the related Korean regulation could be amended along with the worldwide progress for harmonization.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.14 no.1
• /
• pp.35-42
• /
• 2008

Twenty eight gas impermeable plastic films for food-contact application were collected in the domestic market and material and/or migration tests for overall migration, antioxidants, potassium permanganate consumption, heavy metal, and plasticizers were carried out. The average overall migration values for NY/PE or NY/LLDPE, PETP/PE, and PVDC packaging films obtained by using n-heptane as fatty food simulant were 7.6, 6.9 and 14.1 mg/L, respectively. These values were much lower than the limit values of 150 and 30 mg/L for polyethylene and polyvinylidene chloride prescribed in the Korea Food Code. In almost of the packaging materials tested, the antioxidants such as Irganox 1010, Irganox 1076 and Irgafos 168 were found. The migration test result showed that almost of all samples except PVDC film contained Irganox 1076 and Irgafos 168, while the maximum migration value of Irganox 1076 into n-heptane was found in the Ny/PE/LLDPE(15/25/50 ${\mu}m$) sample at the concentration of 216.9 ${\mu}g/g$. From the plastic packaging samples tested, plasticizers such as DEP, DPRP, DBP, DPP, BBP, DCHP, DEHP, DEHA and observed above the detection limit. Consumption amount of potassium permanganate was much lower than the limit value of 10 mg/L. In the material test for heavy metals, cadmium and lead were determined at the concentrations far below the limit value of 100 mg/kg. The migration test for cadmium and lead showed a lower value than the detection limit. Therefore, it can be concluded that the safety status of the plastic films tested met the requirement of limit values as prescribed for the material and migration tests of food packaging utensils, containers and packages of the Korea Food Code.