• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.213-225
• /
• 2020

Floating Offshore Wind Turbines (FOWT) installed in the deep sea regions where stable and strong wind flows are abundant would have significantly improved energy production capacity. When designing FOWT, it is essential to understand the stability and motion performance of the floater. Water tank model tests are required to evaluate these aspects of performance. This paper describes a model test and numerical simulation for a 750-kW semi-submersible platform wind turbine model-II. In the previous model test, the 750-kW FOWT model-I suffered slamming phenomena from extreme wave conditions. Because of that, the platform freeboard of model-II was increased to mitigate the slamming load on the platform deck structure in extreme conditions. Also, the model-I pitch Response Amplitude Operators (RAO) of simulation had strong responses to the natural frequency region. Thus, the hub height of model-II was decreased to reduce the pitch resonance responses from the low-frequency response of the system. Like the model-I, 750-kW FOWT model-II was built with a 1/40 scale ratio. Furthermore, the experiments to evaluate the performance characteristics of the model-II wind turbine were executed at the same location and in the same environment conditions as were those of model-I. These tests included a free decay test, and tests of regular and irregular wave conditions. Both the experimental and simulation conditions considered the blade rotating effect due to the wind. The results of the model tests were compared with the numerical simulations of the FOWT using FAST (Fatigue, Aerodynamics, Structures, and Turbulence) code from the National Renewable Energy Laboratory (NREL).

• 대한의용생체공학회:의공학회지
• /
• 제43권6호
• /
• pp.375-381
• /
• 2022

Brain-computer interface (BCI) is a technology that allows users with motor disturbance to control machines by brainwaves without a physical controller. Motor imagery (MI)-BCI is one of the popular BCI techniques, but it needs a long calibration time for users to perform a mental task that causes high fatigue to the users. MI is reported as showing a similar neural mechanism as motor execution (ME) and motor observation (MO). However, integrative investigations of these three tasks are rarely conducted. In this study, we propose a new paradigm that incorporates three tasks (MI, ME, and MO) and conducted a comparative analysis. For this study, we collected Electroencephalograms (EEG) of motor imagery/execution/observation from 28 healthy subjects and investigated alpha event-related (de)synchronization (ERD/ERS) and classification accuracy (left vs. right motor tasks). As result, we observed ERD and ERS in MI, MO and ME although the timing is different across tasks. In addition, the MI showed strong ERD on the contralateral hemisphere, while the MO showed strong ERD on the ipsilateral side. In the classification analysis using a Riemannian geometry-based classifier, we obtained classification accuracies as MO (66.34%), MI (60.06%) and ME (58.57%). We conclude that there are similarities and differences in fundamental neural mechanisms across the three motor tasks and that these results could be used to advance the current MI-BCI further by incorporating data from ME and MO.

• 대한의용생체공학회:의공학회지
• /
• 제26권2호
• /
• pp.123-127
• /
• 2005

Compression Hip Screw (CHS) is one of the most widely-used prostheses for the treatment of intertrochanteric fractures because of its strong fixation capability. Fractures at the neck and screw holes are frequently noted as some of its clinical drawbacks, which warrant more in-depth biomechanical analysis on its design variables. The purpose of this study was to evaluate changes in the strength with respect to the changes in design such as the plate thickness and the number of screw holes. Both mechanical test and FEM analysis were used to systematically investigate the sensitivities of the above-mentioned design variables. For the first part of the mechanical test, CHS (n=20) were tested until failure. The CHS specimens were classified into four groups: Group Ⅰ was the control group with the neck thickness of 6-㎜ and 5 screw holes on the side plate, Group Ⅱ 6-㎜ thick and 8 holes, Group Ⅲ 7.5-㎜ thick and 5 holes, and Group Ⅳ 7.5-㎜ thick and 8 holes. Then, the fatigue test was done for each group by imparting 50% and 75% of the failure loads for one million cycles. For the FEM analysis, FE models were made for each group. Appropriate loading and boundary conditions were applied based on the failure test results. Stresses were assessed. Mechanical test results indicated that the failure strength increased dramatically by 80% with thicker plate. However, the strength remained unchanged or decreased slightly despite the increase in number of holes. These results indicated the higher sensitivity of plate thickness to the implant strength. No fatigue failures were observed which suggested the implant could withstand at least one million cycles of fatigue load regardless of the design changes. Our FEM results also supported the above results by showing a similar trend in stress as those of mechanical test. In summary, our biomechanical results were able to show that plate thickness could be a more important variable in design for reinforcing the strength of CHS than the number of screw holes.

• 콘크리트학회논문집
• /
• 제22권5호
• /
• pp.609-616
• /
• 2010

FRP-콘크리트 합성 바닥판은 압축에 강한 콘크리트를 상부에 위치시키고 인장에 강한 FRP를 하부에 위치시켜, FRP와 콘크리트가 갖는 장점을 극대화시킴으로서 내구성, 안전성 등을 두루 향상시킨 새로운 개념의 구조이다. 그러나 서로 다른 재질의 두 재료를 합성시키기 위한 방안으로서 연구 초기에 적용된 규사코팅 공법 외에 수직부착력을 향상시킬 수 있는 기계적 합성 방안을 고안하였다. 이렇게 고안한 합성 방안이 적용된 실제 사이즈의 바닥판 실험체를 제작하여 정적 및 피로반복실험을 수행하였다. 정적실험 결과 이 연구에서 제안한 합성 방안이 적용된 바닥판이 처짐 및 균열 등에 대해서 설계기준을 충분히 만족시켜 매우 우수한 성능을 나타내고 있었으며, 피로실험 결과 파괴하중의 50%로 200만회 가력한 후에도 처짐 및 균열 등에 대해 설계기준을 만족하고 있어 충분한 피로내구성을 확보하고 있는 것으로 나타났다. 이에 이 연구에서 제시한 규사코팅과 기계적 합성 방안을 동시에 적용한 합성 방안은 FRP-콘크리트 합성 바닥판에 대해 충분한 적용성을 갖고 있으며, FRP-콘크리트 합성 바닥판 설계시 제시한 설계조건들이 적절하게 이용될 수 있음을 확인하였다.

• 한국강구조학회 논문집
• /
• 제27권6호
• /
• pp.513-523
• /
• 2015

H형강 철골 모멘트 골조에서는 기둥의 강축 방향 용접 모멘트접합부를 활용하는 것이 구조적으로 가장 이상적이다. 하지만, 모멘트 골조가 직교하는 경우, 기둥의 약축 방향으로도 용접 모멘트접합부를 사용해야 한다. 국내에서는 특히 강축 및 약축 방향 모두를 용접 모멘트접합부를 자주 사용하는 관행이 있다. 대표적인 연성내진상세인 RBS(reduced beam section, 보단면감소)접합부의 경우 국내외적으로 강축접합 위주로 실험연구가 진행되어 약축 RBS 용접모멘트접합부에 대한 실험자료가 매우 희소하다. 본 연구에서는 RBS를 도입한 약축 용접 모멘트접합부의 내진성능을 실험적으로 고찰하였다. Gilton-Uang (2002)의 선행연구를 참고하여 보 플랜지는 연속판과 맞댐용접하고 웨브는 전단이음판과 C-형 필릿용접부로 설계하여 실험을 수행하였다. 보에 사용된 강재가 내진용 강재가 아닌 일반 SS400 강재임에도 불구하고 3% 이상의 소성회전각을 발휘하였다. 제한된 결과이긴 하지만, 전단이음판과 보 웨브 사이의 C-형 필릿용접부 설계에서 보 웨브에 작용하는 휨모멘트와 전단력의 편심의 영향을 구체적으로 고찰할 필요가 있는 것으로 판단된다. 본 실험결과를 토대로 전단이음판 부근의 보 웨브 파단을 방지할 수 있는 C-형 필릿용접 형상 및 설계방안을 제안하였다. 보 플랜지와 연속판의 완전용입 용접부는 맞댄이음(butt joint) 형식이 되어 국부좌굴에 취약하고 이로 인해 피로파괴가 발생하는 경향이 있으므로 용접작업에 지장이 없는 범위에서 용접접근공(스켈럽)의 크기를 최소화할 필요가 있다. RBS형상, 스틱아웃, 트림, 연속판 두께 증가 등과 같이 이미 검증된 약축 모멘트 용접접합부의 내진상세들은 따르는 것이 바람직하다.

• 대한한방부인과학회지
• /
• 제21권1호
• /
• pp.134-149
• /
• 2008

Purpose: Dysmenorrhea is a common gynecologic condition among reproductive-age women. It consisted with menstrual clamps and other symptoms such as nausea. vomiting, diarrhea, and fatigue. Pain control for this disease mainly through NASIDs. but recently CAM therapies, acupuncture and others for painful menstruation are widely used in western countries. But RCT articles about dysmenorrhea in Korea, are not enough to lead such global research trends. The purpose of this study is to review treatment method and other research tendency about dysmenorrhea in Korean Medicine(KM) related dominant journals. Methods: Searching was done through web site and directly searched dysmenorrhea related articles in journals of Korean medicine Gynecology, published during 1996-2007. Results: Twenty five articles were searched in KM related journals, then two of them were simple case report and ten were paper of clinical trials. But there no RCT or control group-designed study. All of them present positive effect on dysmenorrhea but drop out rates were relatively high. Conclusion: KM therapies including acupuncture and herbal medicine have some beneficial effect to resolve menstrual cramps, but KM therapy related Korean articles don't have strong objective power as a evidence in the viewpoint of EBM. So continuous clinical trials such as RCT and multi center trials are needed.

• Carbon letters
• /
• 제10권3호
• /
• pp.190-197
• /
• 2009

Various silanes, amino silane, vinyl silane, sulfur silane (TESPD), and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/soft clay/carbon black (CB) and CIIR/hard clay/CB compounds and they are investigated with respect to the vulcanization characteristics, the processability, and the mechanical properties. Comparing hard clay and soft clay filled compounds, hard clay (Suprex) filled system shows a higher die C tear than the soft clay (GK) filled one. The other properties (Mooney, extrusion torque/pressure, torque rise ($M_H-M_L$), modulus at 300%) are close to each other. Among various silanes, the ZS treated hard clay (Suprex) compound shows the highest mechanical property following hard clay(S)/vinyl silane(V) and soft clay(GK)/vinyl silane(V) compounds. The TESPD and the ZS effectively helps a formation of a strong 3-dimensional network structure between silica and CIIR via coupling reaction due to bifunctional nature of TESPD. In addition to that, the ZS added compounds show both a better processability and mechanical properties compared to the S2 ones at low concentration due to improved compatibility between zinc soap and CIIR matrix. Only the ZS added compound shows both improved processabilities (Mooney, Extrusion torque-& pressure) and improved mechanical properties (degree of crosslinking, elongation modulus, tear, and fatigue to failure counts) on both CIIR/hard clay/CB and CIIR/soft clay/CB compounds.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.910-914
• /
• 2012

In constructing all kinds of equipment and steel structures, discontinuous areas such as weld defects formed in a welded structure tend to generate cracks that will result in damage. In this study, ATOS high-strength steel welding becomes important in butt welding where the tensile strength of the steel is over 80kg/$mm^2$. Structural discontinuities such as joints are more susceptible cracks in part due to their repeated loading and fatigue crack growth. The quality of parts produced depend or the shielded amounts of steel and on the skill of the welders in making strong welds. It is true that there are many factors that can be used to generate a lot of research in this area. However geometry and load conditions due to the combined effects with many issues could be solved through this study. Butt welding material at a plate thickness of 12t in ATOS 80 high-strength steel with a 4 pass, 20l/min, 24V/200A welder is good at making specimens with the quality shown in radiographic testing.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.912-918
• /
• 1994

Poor speech intelligibility in an air traffic control room is frequently a result of many, quite different causes and occasionally leads to complaints of the controller personnel. The paper describes a sequence of successful tasks performed in a local control room. The initial measurements included an investigation of the background noise (caused by fans, air condition, computer and radar equipment) and performance checks of the electronic audio and communication equipment with respect to the audio transmission behavior. The spectral composition of the noise as well as the characteristics of the audio communication path between the controllers and the pilots(which showed a loss of spectral information in the audio band due to built-in notch filters for the suppression of control tones) required adaptations of the amplitude behavior of the amplifiers through user adjustable tone controls. The radar console fans, which contributed significantly to the overall noise floor of the room, underwent a substantial reconstruction by replacing the tight mounting with an elastic double suspension, reducing the noise level by 50%. Finally, a possible source of untimely fatigue of the controllers during their working hours has been found in strong spectral components of the noise above the audio band, radiated by numerous video monitors in the control through vibrating components excited by the line frequency of the video signal.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.341-344
• /
• 1999

The effects of post annealing treatments of ferroelectrlclty in PZT(P $b_{1.05}$(Z $r_{0.52}$, $Ti_{0.48}$) $O_3$ thin film deposited on Pt/ $SiO_2$/Si substrate by RF-Magnetron sputtering methode was Investigated. Analyses by RTA(Rapid Thermal Annealing) treatments reveled that the crystallization process strongly depend on the healing temperature. The Perovskite structure with strong PZT (101) plan was obtained by RTA treatments at 75$0^{\circ}C$ With increasing RTA temperature of PZI thin films, the coercive field and remanent Polarization decreased, while saturation polarization( $P_{r}$) was decreased. P-E curves of Pt/PZT/Pt capacitor structures demonstrate typical hysteresiss loops. The measure values of $P_{r}$,. $E_{c}$ and dielectric constants by post annealed at 75$0^{\circ}C$ were 38 $\mu$C/$\textrm{cm}^2$ 35KV/cm and 974, respectively. Switching polarization versus fatigue characteristic showed 12% degradation up to 10$^{7}$ cycles.s.s.s.s.s.s.