• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.128-129
• /
• 2015

Domestic construction industry has seen a negative image in the sense that various accident occurs frequently. Status of construction accidents in the case of domestic workers is reduced. However, if the situation of foreign workers is increasing every year. This study aims to create high-temperature exposure standard table for foreign workers and domestic workers in the analysis through the discomfort index of fatalities and using the WBGT index for reducing fatalities foreign workers to improve the image of the construction industry.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.14-19
• /
• 2011

Conveyors cause a high serious and fatal injuries in the industry. Every year people are hurt or killed as a result of accidents on conveyors. Most accidents occur during operation and maintenance when employees are working on moving, unguarded conveyors or when the conveyors starts unexpectedly. In 2008 there were 486 reported injures ranging from fatalities to injures. Of these 486 reported accidents, 8 were fatalities, 66.9%(325) of reported accidents occurred in manufacturing company and 43.8%(213) occurred at the belt conveyors. The objective of this study was to invent the remote emergency stop device because industrial accidents mainly occur at blind spots where usually do not have any safety guard or device rather than the normal working places. In principle, this new device will use with the existing safety system. Then, it will be powerful safety system for preventing injuries related with conveyors.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.168.1-168.1
• /
• 2003

This report surveyed the trends of the fatalities related to the drug-toxicant (DT) and the drug abuse(DA), requested to analyze to the Central District Office of National Institute of Scientific Investigation for a year, 2002. The mortality related to DT in men was more common than that in the women. The most common age group of DT intoxication was 30's. (omitted)

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.170.2-170.2
• /
• 2003

The most common cause of death in fires is the inhalation of noxious gases rather than thermal injury. Carbon monoxide is well-known toxic component in fire atmospheres. However, the importance of hydrogen cyanide(HCN) as a toxic agent in the fire related fatalities(FRF) is under discussion. HCN is known to be produced in fires involving by the pyrolysis of polyacrylonitril (PAN) and other nitrogen-containing polymer. (omitted)

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.51-59
• /
• 2017

In 2014, there were approximately 4,762 fatalities on Korean roads. The fatality rate has decreased by 6.5 %, as compared to that of the previous year. The pedestrian-vehicle fatalities (1,795) have also decreased by 6 % over the previous year. However, the percentage of the pedestrian fatalities has increased from 37.9 % to 38.7 % during the same period. This is why further research is required, even though the KNCAP pedestrian safety assessment and KMVSS for pedestrian protection currently exist. This paper studied the Upper Legform to Bonnet Leading Edge Test at the front of the vehicles, which has not been introduced yet in Korea. The test method and procedure of the new BLE test in the Euro NCAP test protocol have been reviewed, and the physical tests on SUV and sedan with different bonnet leading edge heights have also been conducted and reviewed. In addition, the test results and characteristics have been analyzed via comparison with the former BLE test and each vehicle type.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.92-100
• /
• 2018

According to 'The Analysis of Industrial Accidents in 2016' by Ministry of Employment and Labor, the number of deaths caused by accidents in the construction field is 391, accounting for 47% of 826 industrial fatalities in all industries. The breakdown of the 391 fatalities of the construction industry shows that 'struck by an object' accident had 30 fatalities, the 3rd in frequency following falling (235) and crashing (32) accidents. This study aims to explore ways to reduce the 'struck by an object' accident with emphasis on safety education and certificate system for rigging and slinging works. This study reviews literature on rigging and slinging works and analyzes 'struck by an object' accidents. The rules and regulation on the rigging and slinging works are also reviewed both for Korea and other countries with best practices in construction safety such as Singapore, Japan, U.K., and U.S. The rigging and slinging certificate systems of those countries are also reviewed to find any advantage in the construction safety management. In addition, a pilot rigging and slinging certificate system was executed in one of domestic construction site followed by two surveys: one on the riggers who participated in the pilot operation and the other on general managers in domestic construction sites. Based on the analysis of the 'struck by an object' accidents and pilot operation, this study proposes a rigging and slinging certificate system to reduce accidents, enhancing safety condition of construction sites. The certificate system was proposed in a way to accommodate working practice of construction sites. Depending on rigging careers and a crane load capacity, riggers are eligible to apply either basic or master certificate which makes difference in the level of rigging works. The safety condition of rigging and slinging work could be substantially enhanced if workers, managers, supervisors, administrators, and policy makers work together consistently.

• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.21-27
• /
• 2012

This study deals with the relationships between signal operation and traffic accident of signalized intersections. The objective of this study is to analyze the traffic accident reduction effects on the operation of all-red clearance interval (ARCI). This study gives particular attentions to evaluating the traffic accident reduction effects of ARCI at 37 signalized intersections in Cheongju using before-after evaluation with comparison group. The main results are as follows. First, the number of traffic accidents, fatalities and injuries has changed before operating ARCI and thereafter. Second, the result of before-and-after evaluation with comparison group showed that the number of accidents was reduced by 20.0% and that the number of fatalities and injuries was reduced by 28.0%. Finally, reduction effects from operating ARCI were evaluated to be 6.0~35.0% in the number of accidents and 18.0~37.0% in the number of fatalities and injuries.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.62-69
• /
• 2019

Korean shipbuilding companies have taken many efforts for safety over the years by developing Health, Safety & Environment (HSE) Management Systems, Procedures, Training, and studying Programs for prevention of incidents. As a result, the shipbuilding industry has succeeded in reducing overall injury rates. Nevertheless, the industry also noticed that incident rates are still not at zero and more importantly, serious injuries and fatalities are still occurring. One factor that may be attributing to this is the lack of managing potential severity during incident investigations, most incident investigations are implemented based on the actual result. Generally, each shipbuilding company develops their customized incident investigation programs and these are also commonly being focused on actual result. This study aimed to develop a shift in strategy toward safety to classify the criteria of potential severity from any incidents and manage that to prevent any recurrence or causing any serious injuries or fatalities in the shipbuilding industry. Several global energy companies have already developed potential severity management tools and applied them in their incident investigations. In order to verify the necessity of improvement for current systems, a case study and comparative analysis between a domestic shipbuilding company and several global energy companies from foreign countries was implemented and comparison of two incident investigation cases from specific offshore projects was conducted to measure the value of a potential severity system. Also, a checklist was established from the data of fatalities and serious injuries in recent 5 years that occurred in Korea shipbuilding industry and a proposal to verify high potential incidents in the incident investigation process and comparative analysis between the assessment by appling proposed checklist and the assessment from a global energy company by using their own system was implemented. As a measure to prevent any incidents, it is required to focus on potential severity assessment during the incident investigation rather than to only control actual result. Hence, this study aims to propose a realistic plan which enables to improve the existing practices of incident investigation and control in the shipbuilding industry.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.5
• /
• pp.48-54
• /
• 2021

According to the Ministry of Employment and Labor's statistics on occupational fatalities in South Korea, more than half of the fatalities in the past five years have occurred in the construction industry. The stuck-by and caught-in-between accidents associated with construction equipment is the major source of fatalities from construction sites. In order to prevent such accidents in construction sites, the government has spent lots of efforts including proposing the "special law on construction safety" and encouraging the implementation of new technology for accident prevention. However, numerous accidents are still occurred at construction sites and further efforts are still required. In this manner, this study developed a collision prevention technique that can prevent collision between equipment and worker by recognizing location and type of the nearby objects through ultrasound scanning. The study conducted a pilot experiment and the analysis results demonstrate the feasibility of achieving high performance in both object recognition and location estimation. The developed technique will contribute to prevent collision accidents at construction sites and provide the supplemental knowledge on developing automated collision prevention system for construction equipment.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.579-586
• /
• 2022

Modular building is a fast-growing construction method, mainly due to its ability to drastically reduce the amount of time it takes to construct a building and produce higher-quality buildings at a more consistent rate. However, while modular construction is relatively safer than traditional construction methods, workers are still exposed to hazards that lead to injuries and fatalities, and these hazards could be controlled using emerging smart technologies. Currently, limited information is available at the intersection of modular construction, safety risk, and smart safety technologies. This paper aims to investigate what aspects of modular construction are most dangerous for its workers, highlight specific risks in its processes, and propose ways to utilize smart technologies to mitigate these safety risks. Findings from the archival analysis of accident reports in Occupational Safety and Health Administration (OSHA) Fatality and Catastrophe Investigation Summaries indicate that 114 significant injuries were reported between 2002 and 2021, of which 67 were fatalities. About 72% of fatalities occurred during the installation phase, while 57% were caused by crushing and 85% of crash-related incidents were caused by jack failure/slippage. IoT-enabled wearable sensing devices, computer vision, smart safety harness, and Augment and Virtual Reality were identified as potential solutions for mitigating identified safety risks. The present study contributes to knowledge by identifying important safety trends, critical safety risk factors and proposing practical emerging methods for controlling these risks.