• 복식
• /
• 제14권
• /
• pp.133-144
• /
• 1990

The purpose of this study is to investigate the absorbance of the Shikonin, one of the major purple pigments, and the stability against the effect of light, $O_2$, and temperature. The effect of mordant and mordanting condition to color and color-fastness is compared and analysed through the color-fastness-test, color-difference value-test, and IR-test. The results were as follows; 1. The absorbance of Shikonin was examinated through 6 kinds of solutions and distilled water. Shikonin was absorbed by solutions rather easily than distilled water. 2. The light effect to Shikonin indicated that the solution with the light was more stable than that without it. 3. The effect of $O_2$ to Shikonin showed that the solution with the $O_2$ was more stable that without it $O_2$. 4. Shikonin -methyl alcohol solution was stable in $25^{\circ}C$. It was unstable in $60^{\circ}C$ and $100^{\circ}C$ with lowered absorbance and changed colors. 5. Color-fastness test to silk and cotton indicated washing color-fastness and perspiration color-fastness was more than 3 grade. But the light color-fastness and crocking color-fastness was low. 6. The comparison between non -colored sample and colored-sample showed the latter was better in fastness. 7. Mordant as $Alk(SO_4)_2{\cdot}24H_2O$ and $AlCl_3{\cdot}6H_2O$ was better than anything else in fastness. 8. Color-difference value-test indicated that the mordant which had the jade green color, the original purple pigment color, was the best in use. 9. The best way to extract the original purple pigment color was in $25^{\circ}C$, because extracted dyeing solution by Soxhlet had the bluish color.

• 한국의류산업학회지
• /
• 제16권3호
• /
• pp.462-468
• /
• 2014

This study investigates the dyeability of soybean protein fabric after dyeing with gallut. In this study, the colorants of gallnut were extracted with boiling water at $60^{\circ}C$ and 60min. Soybean protein fabric was dyed with extracted solution from gallnut according to concentration, temperature and time. After dyeing with gallut solution, dyeability (K/S) was obtained by CCM observation. Al, Cu and Fe were employed as a mordanting agents. Various color changing were produced by the interactions of mordants that were different from soybean protein fabric; however, Al mordant was not indicated as a variable color change. Fastness to washing and light were also investigated. Consequently, the dyeability of the soybean protein fabric dyed with gallut showed reasonable results at 100% o.w.f, $90^{\circ}C$, for 60min. Fastness to washing according to concentration indicated good result as more than grade (4-5) in general. Fastness to light was almost the same compared to fastness to washing at all concentrations. Fastness to washing according to mordants indicated good grade (4) in principle at Al, Cu, and Fe; in addition, fastness to light indicated a good grade too. Fastness to light also indicated the highest dyeability at Fe mordant. This study shows that gallut is a reasonable dyestuff to soybean protein fabric and that it is possible to manufacture a variety of products that use soybean protein fabric.

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.314-326
• /
• 2013

The purpose of this research is to analyze the effects of Dansam and Sappan wood extract to perform combination dyeing on silk fabrics, with respect to color changes, fastness (washing, dry cleaning, perspiration, rubbing and light fastness), and functionality (antibacterial activity and deodorization). Combination dyeing was performed by first combining Dansam with Sappan wood, then Sappan wood with Dansam, in these orders. Given the changes in the combination ratio, pre-mordant treatment was performed. Looking at the surface colors of each dye, Dansam generally produces YR color series, while Sappan wood produces YR, R, and RP color series. The effects of changing the order in which combination dying was performed on the surface colors were as follows. First, combination dyeing (A) was performed by using Dansam before Sappan wood, to produce YR and R color series. Then combination dyeing (B) was performed by using Sappan wood before Dansam, to produce YR, R, and RP color series. By visual inspections, more similar color changes of the combination dyeing were noticed with the post-dyeing material rather than the pre-dyeing material. Therefore, it was presumably confirmed that surface color changes of combination dyeing were greatly influenced by the post-dyeing color. Individual dyeing tests for fastness showed that Dansam was comparatively superior to Sappan wood, which demonstrated lower fastness to washing, dry cleaning, perspiration, and light, relatively. The fastness of combination dyed samples was shown middle, but similar fastness to the post-dye material, The fastness of (B) method was higher than (A) method in the washing and light fastness. This confirms that color fastness from combination dyeing was considerably influenced by the post-dye material. It was found that all dyed samples had a very high bacterial reduction rate of 99.9% and high deodorization rate of 95%.

• 한국의류학회지
• /
• 제22권4호
• /
• pp.469-476
• /
• 1998

The natural dyestuff(chestnut dye) was manufactured from chestnut hulls by boiling in 0.5 NaOH solution and powdering in freeze dryer. To investigate the dyeability and color fastness, cotton, wool, silk and nylon fabrics were dyed under several conditions using the manufactured chestnut dye. Dyeing operation was carried in acidic dyebath of pH 4-5 because the chestnut dye is anionic. Dyeabilities on wool, silk and nylon fabrics were good, especially nylon fabrics were dyed deeper than others. But dyeability on cotton fabrics was not good. All the dyed fabrics showed excellent color fastness to crocking. Color fastness to laupdering of them were moderate to good. Also light fastness of them were moderate to good except nylon. The light fastness of dyed nylon fabrics was as poor as grade 1. But they could be improved to grade 4 by aftertreatment with gallic acid.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.241-249
• /
• 2011

Cotton fabrics was treated with persimmon juice by padding and their dyeability and functionality were assessed including antibacterial activity and deodorization ratio. The merit of padding-based dyeing was easier color reproduction over traditional hand dyeing where various colors and color fastness to light and laundering are hard to obtain. With larger number of padding, the dyed fabrics showed deeper red-yellow colors, which had low brightness and high chromatic colors. The dyed cotton fabrics had a perspiration fastness of 4~5 rating, a rubbing fastness of 3~4 rating, and a washing fastness of 4 rating, As the number of padding and exposed time to sunlight or UV light increase, the values of K/S and ${\Delta}E$ increased and the colors became much deeper gradually. The color development had completed about 70 hours exposure to UV. Among the light sources, the dyed fabrics exposed to UV light showed deeper yellow-red color than those of exposed to sunlight. The cotton fabrics treated with premordants like Al, Cr, Cu, and Sn revealed strong yellow colors, especially the fabrics treated with Fe mordant showed greenish red-yellow colors. As the padding times of dyeing with persimmon juice increased, stiffness and water repellent property were enhanced in warp and weft directions, respectively. Also, the dyed fabrics have good antibacterial activity and deodorization.

• 한국의상디자인학회지
• /
• 제5권3호
• /
• pp.1-6
• /
• 2003

The purpose of this study was to investigate the dyeability and color fastness of cotton and silk fabrics dyed with extract of Arrowroot leaf princeps. The experimental items were divided into the mordant treatment, component of fabric and kind of mordants. The experimental study was done by laundering, abrasion(dry/wet), perspiration(acid/alkali), light fastness, color difference by C.C.M system and K/S test. The summerized finding reulted from experiment and investigation are suggested as follows : In the C.C.M and K/S test on mordanting method and kind of fabric, that of silk and cotton was the most effective in the pre mordant treatment. In the C.C.M and K/S analysis on 5 mordants, that of silk and cotton was significantly improved when mordants was treatmented. Especially, that of Fe mordanting treatment was higher than Al, Cu, Cr and none. In color fastness on mordants, laundering, perspiration and abrasion fastness showed 4-5 grade but light fastness showed 1-3 grade.

• 한국의류산업학회지
• /
• 제4권4호
• /
• pp.394-398
• /
• 2002

The purse of this study was to invesigate the dyeing fastness on extract of bufferbur leaf princeps. The experimental items were divided into the mordant treatment, component of fabric and kind of mordants. The experimental study was done by laundering, abrasion (dry/wet), perspiration (acid/alkali), light, iron fastness test and color difference by C.C.M system. The summerized finding resulted from experiments and investigation are suggested as follows : In the C.C.M test on mordanting method and kind of fabric, color difference of silk was three times higher than cotton. The silk fabric was the highest in simultaneous mordant treatment but cotton fabric was the highest in none mordant. In color difference analysis on 6 mordants, that of silk and cotton was significantly improved when mordants was treatmented. Especially color difference of Fe and Cu mordanting treatment was higher than Cr, Sn, Al and none. In dyeing fastness on mordants laundering, perspiration, abrasion and iron fastness showed 4-5 grade but light-fastness showed 1-3 grade.

• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.1-9
• /
• 1993

The Cotton fabric was dyed with various directd dyes, and then treated with copper sulfate or copper sulfate/thiourea. Munsell color system, dye exhaustion, tensile strength, light fastness, washing fastness and rubbing fastness were investigated for the treated fabrics. The results obtaind are as follows: 1. The color variation of the cotton-dyed fabric by aftertreatment with copper sulfate was shown redish, but original color with copper sulfate/thiourea. 2. Copper sulfate/thiourea was much more effective than copper sulfate only to increase the light fastness, washing fastness and rubbing fastness. 3. Dye exhaustion of the cotton-dyed fabric by aftertreatment with copper sulfate was decreased about 20% more than those of untreated. 4. Tensile stregth of cotton-dyed fabric by aftertreatment with copper sulfate/thiourea was decrease about 10% more than those of untreated.

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.24-30
• /
• 1996

In order to investigate the light fastness of amino azo disperse dyes, some kinds of disperse dyes were prepared and dyed to polyester fabric under the different conditions, such as single or mixture state. After the dyed fabric was irradiated with carbon arc light for several hours, the color differences and K/S values of fabric were measured. The light fastness of amino azo disperse dye was decreased by the introduction of OH group to the dye molecule. But when the amino azo dye was mixed with the anthraquinone disperse dye, the light fastness was increased. It was considered that the dye molecules were aggregated on account of hydrogen bonding via OH groups, resulting the decrease of surface area of dye molecule which might be irradiated by the light.

• 패션비즈니스
• /
• 제10권2호
• /
• pp.27-39
• /
• 2006

In this study, physical/chemical characteristics of the fabrics dyed using Japanese pagoda tree which is a yellowish dyestuff was investigated. We tried to estimate the dyeing mechanism among fiber macromolecules, mordants, chitosan, and dyestuffs by measuring the change of air-permeability according to the dyeing process. Also wash fastness and light fastness were measured in order to estimate the fastness according to the dyeing characteristics. When the chitosan pre-treatment was introduced, the wash fastness increased significantly in the cotton fabrics while the fastness did not change in the nylon fabrics significantly. The light fastness was not improved by the chitosan treatment. when the antibacterial activity was measured for the dyed cotton fabrics, Japanese pagoda tree itself did not exhibit antibacterial activity. However, chitosan treated dyed fabrics exhibited low antimicrobial activity.