• Fashion & Textile Research Journal
• /
• v.11 no.4
• /
• pp.661-666
• /
• 2009

The purpose of this study is to analyze the dyeability of polyester(PET) fabric by thermal bonding with low melting component of bicomponent fiber and to describe the change of physical properties of thermal bonded PET fabrics. The PET fabrics were prepared with regular PET fiber as warp and bicomponent fiber as weft. The bicomponent fiber of sheath-core type was composed with a regular PET core and low melting PET sheath. The thermal bonding of PET fabric was carried out in pin tenter($195^{\circ}C$) for 60 seconds. In this study, we investigated the dye ability and fastness of the dyed PET fabric. Dye ability of E-type dyestuff is higher than S-type dyestuff. In the case of E- type dyestuff, the saturated dyeing time was 10minutes at $130^{\circ}C$. The washing fastness and light fastness were excellent as 4-5grade.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.129-137
• /
• 2000

Silk fabrics were dyed by Cochineal extracts after mordanted with various mordants and their properties of dyeing, fastness and change of surface color were investigated. Silk fabrics were mordanted with aluminum potassium sulfate, copper acetate, tin chloride, iron sulfate or chromium potassium sulfate at $60^\circ{C}$ for 30 minutes and subsequently dyed at $60^\circ{C}$ for 60 minutes unless mentioned otherwise. The dye-uptake of silk fabrics increased with the concentration of Cochineal extracts and mordants used. Maximum dye-uptake was obtained at pH 3.5-4, regardless of the type of mordants used. Surface color of silk fabrics changed from red purple to purple when mordanted with Al or Cu mordant, from purple to purple blue with Fe mordant and showed red purple with Sn or Cr mordant, respectively. It also changed according to pH of dyeing bath. Dyed silk fabrics showed poor light fastness but good dry-cleaning, perspiration and rubbing fastness.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.803-809
• /
• 2004

In order to activate the characteristics of charcoal in fiber systems, this was carried out to experiment with the particle size from two micrometers to ten micrometers of charcoal powders on cotton fabrics. The results obtained were as follows; The fabrics were dyed with gray colors by charcoal. The K/S values, that were indicative of the dye affinity, became higher as the increase of dyeing temperature, dyeing time, and dyeing concentration. Also it was confirmed the morphology of the fiber surfaces adsorbed with the particle size from two micrometers to four micrometers of charcoal powder by scanning electronmicronscope. The cotton fabrics dyed by charcoals generally recorded 3-4 degree of wash fastness, 4-5 degree of dry-cleaning fastness, 4-5 degree acidic and alkaline perspirations and water fastness. In connection with the functional properties, cotton fabrics dyed with charcoal appeared that antibacterial, deodorization, far infrared emissivity were improved. Especially the deodorization was improved greatly by using charcoal.

• Textile Coloration and Finishing
• /
• v.25 no.4
• /
• pp.262-270
• /
• 2013

Temporarily solubilized reactive disperse dyes containing ${\beta}$-sulfatoethylsulfonyl group were applied to 100% meta-aramid knitted fabric and their dyeing properties were investigated. Reactive disperse dyes showed relatively high K/S values on meta-aramid fabric when compared with conventional disperse dye or reactive dye, which showed very low K/S values. Color yields of reactive disperse dyes were highly dependent on dyeing pH and optimum results were obtained at pH 6. Percent exhaustion of reactive disperse dye on meta-aramid fabric was over 80% at 2% o.w.f of dye concentration. Wash fastness of pyridone-based reactive disperse dyes was very good to excellent while that of aminoazobenzene reactive disperse dyes was medium to good. Light fastness of all the reactive disperse dyes was very poor which seems to be due to the low photostability of meta-aramid fiber itself.

• Textile Coloration and Finishing
• /
• v.16 no.2
• /
• pp.41-46
• /
• 2004

We have studied on the experimental variables such as optimum adsorption condition, color changes, light fastness, antimicrobial properties, and wash durability of the cotton fabrics treated with gallnut extracts. Treatment of gallnut extracts on the cotton fabrics was optimally achieved at 6$0^{\circ}C$ for 60min. Gallnut extracts did not cause unintended color change after treatment on the cotton fabrics dyed with reactive dyes. The cotton fabrics treated with gallnut extracts showed good light fastness, though we took into the account the extract is a natural material. The cotton fabrics treated with 10.0% o.w.f. of gallnut extracts had strong antimicrobial activity and good wash durability.

• Fashion & Textile Research Journal
• /
• v.12 no.6
• /
• pp.837-842
• /
• 2010

This study examines the dyeability, light fastness, washing fastness, and antibacterial activity of chitosan and nano silver composite knit fabrics dyed with extracted solution from Chrysanthemum Indicum Linn. The results show that ${\Delta}E$ values of chitosan and nano silver composite knit fabrics were higher than cotton 100% knit fabrics in dyed condition with extracted solution from Chrysanthemum Indicum Linn, and mordant treatments influenced the chrominance change. Chrysanthemum indicum Linn confirmed that this could be a polygenetic colors. ${\Delta}E$ values of post-mordant treatments knit fabrics were higher than pre-mordant treatments knit fabrics in dyed condition with extracted solution from Chrysanthemum Indicum Linn., and mordant treatments method influenced the chrominance change. The dyeability of chitosan and nano silver composite knit fabrics was increased by mordant treatment. The fastness of the chitosan and nano silver composite knit fabrics was better than cotton 100% knit fabrics. In the result of antibacterial activity, the bacterial reduction rate of chitosan and nano silver composite knit fabrics was 99.9% to Staphylococcus aureus and Klebsiella pneumoniae.

• Textile Coloration and Finishing
• /
• v.16 no.6
• /
• pp.16-22
• /
• 2004

This study was carried out to investigate K/S values, surface color, the fastness to washing, bacteria reduction rate of the silk and cotton fabrics dyed with Rhus verniciflua extract under the various dyeing conditions. The optimum dyeing temperature, dyeing time, dyeing pH and repetition of the silk fabrics dyed with Rhus verniciflua extract were $l00^{\circ}C, 30min., pH 5, five times repetition respectively, but in the cotton fabrics, it were $60^{\circ}C . 30min., pH 7, one times repetition. It were colored orangish Yellow in the silk fabrics and colored bright yellow in the cotton fabrics dyed with Rhus verniciflua extract. Surface color(munsell value) was not changed by the mordanting agents but those of the silk showed high tone when mordanting with stannous chloride, and it was decolored and darked when mordanting with ferric sulfate. The fastness to washing in the silk fabrics dyed with mordanting agents improved in 4～5 grade, but the cotton fabrics were 3～4 grade, so washing fastness of the silk and cotton fabrics were significantly improved when washing with the neutral detergent. The bacteria reduction rate of the silk fabrics increased drastically by dyeing of Rhus verniciflua extract.

• Journal of Fashion Business
• /
• v.9 no.1
• /
• pp.113-119
• /
• 2005

In our previous study, the color development characteristics in the dyeing of silk fibers and PET fibers using Rhusjara ica and related properties were meticulously reviewed. At the same time, the fabric specimens were endowed with chitosan treatment prior to the dyeing procedure in order to investigate the effect of chitosan on the dyeing behavior. The analysis of the colors only, however, would not give us complete elucidation of the effect of fiber characteristics and the mordanting characteristics. In this study, the effect of chitosan and metal mordant treatment in dyeing of silk and PET fabrics using Rhusjara ica has been studied. The change of air-permeability, wash fastness, and light fastness were also investigated.

• Journal of Fashion Business
• /
• v.11 no.5
• /
• pp.79-89
• /
• 2007

The effect of chitosan treatment on the dyeing and dye fastness, and mechanical properties of hair was investigated in this study when the carotinoid dyestuffs extracted from African Marigold(Tagetes erecta L.) were applied to the hair. The sequences of the chitosan treatment were changed in dyeing and mordanting procedures, i.e., pre-treatment, mid-treatment, and post-treatment. While the effect of chitosan application on the color shade change was not significant, the pre-treatment of the chitosan increased the dye uptake. Discoloration and fading was observed in the lightfastness test when chitosan was mid-treated. Alkali perspiration and acid perspiration fastness test results showed that chitosan post-treatment gave lower tendency. Washing fastness results showed that chitosan post-treatment and mid-treatment gave lower values, which indicates that chitosan deters the direct formation of insoluble complex among fiber-dyestuff-mordant. In the mechanical characteristics results, however, initial modulus and breaking strength increased significantly in the post-treatment and pre-treatment of chitosan.

• Fashion & Textile Research Journal
• /
• v.10 no.1
• /
• pp.106-112
• /
• 2008

The purpose of this study is to define optimal conditions for wool blend fabric dyeing using Rhus verniciflua extract. K/S value, surface color change, the fastness to light, fastness to dry-cleaning, metal mordanting effects and antimicrobial activities were investigated. The results were summarized as follows; As the storage time of Rhus verniciflua stokes dyeing solution was longer, K/S was improved. K/S value showed the highest one when dyeing temperature and time were at 100oC and 60 minutes respectively. As for the changes of pH values of the dyeing solution, fabric was dyed well with the pH value of acid or neutral. K/S value recorded the highest at pH6 and the lowest at pH10. Fastness to light showed the unmordanted fabric is 2.84, and Fe is 1.69 on color difference. Antibacterial activities of Rhus verniciflua dyeing solution recorded high figures in both dyed fabric with unmordanted and dyed fabric with mordanting.