• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.742-749
• /
• 2011

Power transmission lines are one of the most important components of electric power system. Failures in the operation of power transmission lines can result in serious power system problems. Hence, fault diagnosis (transient or permanent) in power transmission lines is very important to ensure the reliable operation of the power system. A hidden Markov model (HMM), a powerful pattern recognizer, classifies events in a probabilistic manner based on fault signal waveform and characteristics. This paper presents application of HMM to classify faults in overhead power transmission lines. The algorithm uses voltage samples of one-fourth cycle from the inception of the fault. The simulation performed in EMTPWorks and MATLAB environments validates the fast response of the classifier, which provides fast and accurate protection scheme for power transmission lines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.362-364
• /
• 1998

The transmission of information by inductive loop is required for train-safety and fast running. FSK modulation has been used for transmission of information in fast running. Transmission channel between train and ground must be protected from interference of power line. To protect transmission data from noises, the analysis on the transmission line must be performed in advance. In this paper, transmission line is analyzed in view of reflection and time delay in both noise and signal.

• Journal of Communications and Networks
• /
• 제12권3호
• /
• pp.209-215
• /
• 2010

In an asymmetrical speed channel environment like asymmetric digital subscriber line, the up-link bandwidth is normally smaller than the down-link bandwidth, which will lead to extremely low utilization of down-link bandwidth when current P2P video transmission is applied. To overcome this, a new fast P2P video transmission method applied in an asymmetrical speed channel environment is proposed in this paper. On the basis of the many-to-one concept, the proposed method uses a new multipeer aggregation technique to enhance the utilization of down-link bandwidth. In addition, an adaptive peer assignment algorithm is also introduced in order to minimize the overall transmission time. Experimental results show that by using our proposed method, the utilization of down-link bandwidth is significantly improved, and the overall transmission time is greatly reduced.

• 한국통신학회논문지
• /
• 제29권7B호
• /
• pp.650-659
• /
• 2004

국내 무선 네트워크 환경은 사용자의 서비스 요구 수용과 시장 성장으로 인해 빠르게 변화하고 있다. 이에 따라 무선 구간에서 TCP(transmission control protocol)를 이용한 신뢰성 있는 데이터 전송도 늘어날 전망이다. TCP는 유선 네트워크에서 사용함을 가정으로 만들어졌기 때문에 무선에서 발생할 수 있는 비 혼잡 손실에 의해 많은 성능 저하를 겪을 수 있다. 특히 RTO(retransmission timeout)은 TCP의 성능에 많은 영향을 미친다. 본 논문에서는 송신단에서 fast recovery과정 중에 발생한 패킷 손실을 빠르게 감지하여 RTO없이 복구함으로써 성능저하를 줄일 수 있는 DAC$^{＋}$(Duplicate Acknowledgement Counting)와 EFR(Extended Fast Recovery)을 제안한다. 제안 알고리듬을 TCP NewReno와 비교했을 때 정상 상태에서 fast recovery 확률이 높고, 이에 따른 RTO 감소로 인해 response time이 줄어드는 것을 확인할 수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권7호
• /
• pp.3018-3038
• /
• 2020

In the stereoscopic or multiview display, the depth video illustrates visual distances between objects and camera. To promote the computational efficiency of depth video encoder, we exploit the intra prediction of depth videos under Versatile Video Coding (VVC) and observe a diverse distribution of intra prediction modes with different coding unit sizes. We propose a hybrid scheme to further boost fast depth video coding. In the first stage, we adaptively predict the HADamard (HAD) costs of intra prediction modes and initialize a candidate list according to the HAD costs. Then, the candidate list is further improved by considering the probability distribution of candidate modes with different CU sizes. Finally, early termination of CU splitting is performed at each CU depth level based on the Bayesian theorem. Our proposed method is incorporated into VVC intra prediction for fast coding of depth videos. Experiments with 7 standard sequences and 4 Quantization parameters (Qps) validate the efficiency of our method.

• 방송공학회논문지
• /
• 제9권2호
• /
• pp.119-130
• /
• 2004

We have developed a prototype super-high-definition (SHD) digital cinema distribution system that can store, transmit, and display eight-million-pixel motion pictures that have the image quality of a 35-mm film movie. The system contains a movie server, a real-time decoder, and an SHB projector. Using a Gigabit Ethernet link and TCP/IP, the server transmits JPEG2000 compressed motion picture data streams to the decoder at transmission speeds as high as 300 Mbps. The received data streams are decompressed by the decoder, and then projected onto a screen via the projector. By using an enlarged TCP window, multiple TCP streams, and a shaping function to control the data transmission quantity, we achieved real-time streaming of SHD movie data at about 300 Mbps between Chicago and Los Angeles, a distance of more than 3000 km. We also improved the decoder performance to show movies with Image qualities of 450 Mbps or higher. Since UDP is more suitable than TCP for fast long-distance streaming, we have developed an SHD digital cinema UDP relay system, in which UDP is used for transmission over a fast long-distance network. By using four pairs of server-side-proxy and decoder-side-proxy, 450-Mbps movie data streams could be transmitted.

• Applied Microscopy
• /
• 제44권4호
• /
• pp.138-143
• /
• 2014

Transmission electron microscope (TEM) is an excellent tool for studying the structure and properties of nanostructured materials. As the development of $C_s$-corrected TEM, the direct analysis of atomic structures of nanostructured materials can be performed in the high-resolution transmission electron microscopy (HRTEM). Especially, fast Fourier transform (FFT) technique in image processing is very useful way to determine the crystal structure of HRTEM images in reciprocal space. To apply FFT technique in HRTEM analysis in more reasonable and friendly manner, we made a new circular region of interest (C-ROI) FFT script and tested it for several HRTEM analysis. Consequentially, it was proved that the new FFT application shows more quantitative and clearer results than conventional FFT script by removing the streaky artifacts in FFT pattern images. Finally, it is expected that the new FFT script gives great advantages for quantitative interpretation of HRTEM images of many nanostructured materials.

• 한국통신학회논문지
• /
• 제24권9B호
• /
• pp.1643-1651
• /
• 1999

주문형 비디오 서비스는 궁극적으로 사용자에게 VCR 기능과 같은 대화형 연산을 지원하여야 할 것으로 기대된다. 특히, VCR 기능 중에서 고속 전진 및 고속 후진 재생의 지원이 중요하다. 그러나 고속 재생을 지원하기 위해서는 매우 큰 시스템 자원을 필요로 하므로 이를 줄이기 위한 방안이 필요하다. MPEG 표준에서 GoP(Group-of-Pictures)는 독립적인 복원이 가능한 임의 접근 단위이며 비디오 스트림은 GoP 단위로 저장 및 전송되는 것이 효율적이므로 GoP 단위로 건너뛰면서 m배속 고속 재생을 제공하는 것이 실용적이다. 본 논문에서는 저장된 비디오 스트림에 대하여 m배속 고속 재생 기능을 지원하기 위한 동적 전송 스케줄 작성 방안을 제안한다. 제안된 방안은 사용자가 고속 재생을 요청할 때마다 매 m번째 GoP들로 평활화 대상 GoP 집합을 구성하여 대역폭 평활화를 적용하여 대역폭 할당 스케줄을 구한 후에 새로운 전송 스케줄에 따라 클라이언트로의 데이터 전송을 재개한다. 본 논문에서는 고속 재생을 지원하기 위한 방안으로“GoP 건너 뛰기”를 활용함으로써 재생 속도를 m배 빠르게 하는 효과는 가져 왔으며, GoP 단위로 대역폭 평활화를 적용\ulcorner으로써 전송 스케줄을 구하기 위한 계산량을 크게 감소시킬 수 있었다.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1053-1058
• /
• 2013

Because of computational burden and complex topology of substation, a transmission overload relief using circuit-breaker switching was very complex and difficult. However, a on-line algorithm for reducing the overloads in transmission lines has made progress due to the advance of IT technology. This paper describes the methodology for alleviating the overloads in transmission lines by circuit-breaker switching. First, the severe contingency lists and substations were selected from the results of contingency analysis. Then the switch combinations are determined using circuit-breakers of the selected substation. The topology changes are limited to equipment outage, bus split, island split, bus merge and island merge. Finally, the fast screening and full analysis methods are used to analyze the overload in transmission lines. To verify the performance of the proposed methodology, we performed a comprehensive test for both test system and large-scale power systems. The results of these tests showed that the proposed methodology can accurately alleviate the overloads in transmission lines from online data and can be applied to on-line applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.926-928
• /
• 1998

A fast optimization algorithm has been evolved from a simple two stage optimal power flow(OPF) algorithm for constrained power economic dispatch. In the proposed algorithm, we consider various constraints such as power balance, generation capacity, transmission line capacity, transmission losses, security equality, and security inequality constraints. The proposed algorithm consists of four stages. At the first stage, we solve the aggregated problem that is the crude classical economic dispatch problem without considering transmission losses. An initial solution is obtained by the aggregation concept in which the solution satisfies the power balance equations and generation capacity constraints. Then, after load flow analysis, the transmission losses of an initial generation setting are matched by the slack bus generator that produces power with the cheapest cost. At the second stage we consider transmission losses. Formulation of the second stage becomes classical economic dispatch problem involving the transmission losses, which are distributed to all generators. Once a feasible solution is obtained from the second stage, transmission capacity and other violations are checked and corrected locally and quickly at the third stage. The fourth stage fine tunes the solution of the third stage to reach a real minimum. The proposed approach speeds up the coupled LP based OPF method to an average gain of 53.13 for IEEE 30, 57, and 118 bus systems and EPRI Scenario systems A through D testings.