• 천문학회보
• /
• 제40권1호
• /
• pp.49.3-50
• /
• 2015

Synchrotron radiation of relativistic electrons is an important radiation mechanism in many astrophysical sources. In the sources where the synchrotron cooling timescale is shorter than the dynamical timescale, electrons are cooled down below the minimum injection energy. It has been believed that such fast-cooling electrons have a power-law distribution in energy with an index -2, and their synchrotron radiation has a photon spectral index -1.5. On the other hand, in a transient expanding astrophysical source, such as a gamma-ray burst (GRB), the magnetic field strength in the emission region continuously decreases with radius. Here we study such a system, and find that in a certain parameter regime, the fast-cooling electrons can have a harder energy spectrum. We apply this new physical regime to GRBs, and suggest that the GRB prompt emission spectra whose low-energy photon spectral index has a typical value -1 could be due to synchrotron radiation in this moderately fast-cooling regime.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.285-290
• /
• 2007

KALIMER-600 is a sodium cooled fast reactor with a fast spectrum neutron reactor core. The NSSS design has three heat transport systems of a PHTS (Primary Heat Transport System), a IHTS (Intermediate Heat Transport System) and a SGS (Steam Generation System). PHTS is a pool type and has a large amount of sodium in the pool. The mechanical design targets are maintaining the enough structural integrity for a seismic load of SSE 0.3g and the thermal and mechanical loads by the high temperature environments and an economical competitiveness when compared with other reactor types.

• The Journal of the Acoustical Society of Korea
• /
• 제20권4E호
• /
• pp.24-30
• /
• 2001

This paper describes a fast harmonic estimation, referred to as Delta Adjustment (DA), using a low resolution pitch. The presented DA method is based on modification of the Generalized Dual Excitation (GDE) technique[1] which was proposed to improve speech enhancement performance. We introduce the GDE technique and modify it to be suitable for low bit rate harmonic coding that uses only an integer pitch estimate. Unlike the GDE, the DA matches a frequency-warped version of the original spectrum that conforms to a fixed pitch at all harmonic bands. In addition, complexity and performance of the presented method are described in comparison with those of the conventional Fractional Pitch (FP) based harmonic estimation. Experimental results showed that the DA algorithm significantly reduces the complexity of the FP method while maintaining the performance.

• 한국전산구조공학회논문집
• /
• 제17권1호
• /
• pp.67-74
• /
• 2004

동적 불안정 좌굴현상에 관한 연구는 다소 발표되고 있으나, 주기성을 가진 하중하에서의 동적 좌굴을 다룬 연구는 그리 많지 않은 편이다. 주기성을 가진 하중하에서의 거동은 STEP 하중하에서의 거동과는 다르리라 예상된다. 본 논문에서는 동적 불안정의 기본 메커니즘을 파악하기 위하여 양단 핀으로 고정된 정현형 아치가 정현형 조화하중을 받았을 때의 얕은 아치를 대상으로 한다. Newmark- β법에 의한 수치적분을 이용하여 비선형 운동 방정식의 변위 응답을 구하고, 얻어진 비선형 변위 응답으로 FFT(Fast Fourier Transform)에 의한 연속 응답 스펙트럼을 구해 동적 불안정 특성에 관해서 분석한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.457-462
• /
• 2007

This paper reports on the research which investigates acoustic signals acquired in turning with rough and finish simultaneously. The material is aluminum thin pipe. Two acoustic sensors were set on CNC machine. One was set on the finish bite and the other the rough. Two signals were first analyzed in order to consider how much the acoustic signal from the finish bite was coupled by that from the rough. A simple data collecting system to acquire signals from the finish was then determined because two acoustic signals were little coupled. Second the fundamental experiments were accomplished to study the effects of machine vibration and material state. The signal characteristics due to surface defects were studied from the collected acoustic signal data. The signal analysis was based on real time data, root mean squared average and frequency spectrum by fast fourier transform. As a result, the acoustic signals were made effects by machine condition, material structure. The acoustic signal from the finish bite was closely correlated with surface quality. Two types surface micro defects were then evaluated by the signal characteristics.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1847-1861
• /
• 2020

A design study was performed to improve the limit aseismic performance (LSP) of a primary heat transport system (PHTS) pump. This pump is part of the primary equipment of a prototype generation IV sodium-cooled fast reactor (PGSFR). The LSP is the maximum allowable seismic load that still ensures structural integrity. To calculate the LSP of the PHTS pump, a structural analysis model of the pump was developed and its dynamic characteristics were obtained by modal analysis. The floor response spectrum (FRS) initiated from a safety shutdown earthquake (SSE), 0.3 g, was applied to the support points of the PHTS pump, and then the seismic induced stresses were calculated. The structural integrity was evaluated according to the ASME code, and the LSP of the PHTS pump was calculated from the evaluation results. Based on the results of the modal analysis and LSP of the PHTS pump, design parameters affecting the LSP were selected. Then, ways to improve the LSP were proposed from sensitivity analysis of the selected design variables.

• 한국전자통신학회논문지
• /
• 제6권2호
• /
• pp.237-242
• /
• 2011

본 논문에서는 다층 퍼셉트론 신경회로망을 사용하여 각 프레임에서의 유성음, 무성음, 그리고 묵음 구간을 검출하는 구간검출 알고리즘을 제안한다. 다층 퍼셉트론 신경회로망의 입력으로는 고속 푸리에변환에 의한 전력스펙트럼 및 고속 푸리에변환 계수가 사용되어 네트워크가 학습된다. 본 실험에서는 원 음성에 백색잡음이 중첩된 음성을 신경회로망에 입력함으로서 각 프레임에서의 유성음, 무성음, 묵음 구간의 검출성능 결과를 나타낸다. 본 실험에서는 신경회로망의 학습 데이터 및 평가 데이터가 다를 경우에도 이러한 음성 및 백색잡음에 대하여 92% 이상의 검출율을 구할 수 있었다.

• 한국통신학회논문지
• /
• 제13권5호
• /
• pp.400-410
• /
• 1988

본 논문에서는 SAW TDL정합필터와 SAW 재순환 루프를 이용하여 SNR이 낮은 경우의 직접확산 방식 스펙트럼확산 통신의 수신단에서 포착 및 추적의 구분없이 동기를 수행할 수 있는 고속동기 시스템을 설계하여 그 특성을 조사하였다. 그 수신단에서 SNR이 -16dB인 신호를 입력시켰을때 이를 SAW TDL정합필터와 재순환루프를 통해 30회 순환시켜 동기신호를 추출하여 수신단의 PN코드를 동기시킬 수 있었다. 그리고 이 동기 시스템의 평균 동기 시간을 계산하였다. 그 결과 이동기 시스템이 수신된 신호의 SNR이 매우 낮은 환경하에서 정합필터만을 사용하는 동기 시스템보다 훨씬 고속으로 수신단의 PN 코드를 동기화 시킬 수 있음을 알 수 있었다.

• 센서학회지
• /
• 제24권3호
• /
• pp.169-174
• /
• 2015

In this study, we developed a system to detect the various defects in the metallic objects using the phenomenon that the defects cause the changes of the natural resonant frequencies. Our system consists of a FFT Amp, an Auto Impact Hammer, a Hammer controller and a PC. Auto Impact Hammer creates vibrations in the metallic objects when tapped on the surface. These vibrational signals are converted to the voltage signals by an acceleration sensor attached to the metallic part surface. These analog voltage signals were fed into an ADC (analog-digital converter) and an FFT (fast fourier transform) conversion in the FFT Amp to obtain the digital data in the frequency domain. Labview graphical program was used to process the digital data from th FFT amp to display the spectrum. We compared those spectra with the standard spectrum to find the shifts in the resonant frequencies of the metal parts, and thus detecting the defects. We used PCB's acceleration sensor and TI's TMS320F28335 DSP (digital signal processor) to obtain the resolution of 2.93 Hz and to analyze the frequencies up to 44 kHz.

• 한국인터넷방송통신학회논문지
• /
• 제10권3호
• /
• pp.167-172
• /
• 2010

본 논문은 ATSC DTV (advanced television system committee digital television) 신호를 검출하기 위해 고속 퓨리에 변환 (FFT : fast Fourier transform) 기반의 파일럿 신호를 검출하는 알고리즘의 성능을 파라미터를 변화시켜가면서 분석하였다. DTV 신호를 검출하기 위한 요구사항을 분석하였으며, 센싱 회수 및 시간에 따라서 성능을 비교하였다. 실험 결과 센싱 횟수가 증가할수록 신호 검출 성능이 향상되는 것을 확인할 수 있었다. 본 논문의 결과는 DTV 주파수 대역의 인지 라디오 (CR : cognitive radio) 시스템을 구현하는데 참고자료로 활용될 수 있다.